Fulbat FTX24HL-BS · Motorcycle battery 12V 22.1Ah 350A AGM

Motorcycle battery Fulbat FTX24HL-BS 12V 22.1Ah 350A AGM
search
  • Motorcycle battery Fulbat FTX24HL-BS 12V 22.1Ah 350A AGM

Specifications

BrandFULBAT
Part numberFTX24HL-BS
Voltage (V)12V
Capacity (C20)22.10Ah
Capacity (C10)21Ah (c10)
TechnologyAGM
Length205mm
Width87mm
Height162mm
See the full specifications →

This product is priced on demand to offer you the best available price at all times.

Please contact us to request a quote and we will inform you about availability and the best price on the entire website, as well as the delivery time.

Thank you

Fulbat FTX24HL-BS 12V 22,1Ah 350A is a motorcycle starter battery with standard JIS code (the one on your bike's original label). Ready to use, sealed and vibration-resistant. Fits any model that takes the same JIS reference — the code your mechanic recognises at a glance.

Why this motorcycle battery?

  • Same JIS referenceas your bike's original — fits first time
  • Sealed and ready to useno acid handling, no refills
  • Survives winter storageholds charge through long off-season
Voltage
12 V
Capacity
22,1 Ah C20
Cold cranking
350 A EN-1
Dimensions
205×87×162 mm
Technology
AGM
Polarity
Positive on the right
Free quote, no obligation

Request a quote for your Motorcycle battery Fulbat FTX24HL-BS 12V 22.1Ah 350A AGM

  • Reply in under 24 working hours
  • Best price guaranteed
Attach photo (optional)
Photo of the old battery or vehicle documentation · Max. 3 · 8 MB · images or PDF
Logo Fulbat

Motorcycle battery Fulbat FTX24HL-BS 22.1Ah 350A 12V

12VVoltage
22.1AhCapacity
350ACold cranking

With 22.1 Ah at 12 V and 350 A of cold cranking current (EN), the Fulbat FTX24HL-BS with AGM technology replaces the original battery of motorcycles, scooters, quads and personal watercraft. Measuring 205 × 87 × 162 mm and the positive terminal on the right, it is the direct replacement for motorcycles fitted from the factory with a 22.1 Ah battery of this format.

  • Holds its charge through winter storage.
  • Compact and lightweight format.
  • AGM: faster recharging and better cycle resistance than a conventional battery.
  • Sealed and ready to fit, no acid handling.

What the Fulbat FTX24HL-BS is for

The Fulbat FTX24HL-BS is a common replacement in motorcycles, scooters, quads and personal watercraft. If your bike spends the winter standing, a trickle charger stops it reaching spring flat.

Size, terminals and hold-down of the Fulbat FTX24HL-BS

It has external dimensions of 205 × 87 × 162 mm. The positive terminal on the right decides which side the cables end up on: it is the detail that causes most buying mistakes, so check it before ordering. Checking the three dimensions and the terminal position before buying avoids the most common mistake when replacing a battery.

What Fulbat does differently

Fulbat has manufactured in France since 1978 and specialises in motorcycles and light vehicles. Its catalogue is short and clear, covers almost the whole fleet and works only with sealed, leak-free batteries. At baterias.com we work directly with the manufacturer or its official distributor: real stock, brand-new product and official warranty.

Technology inside the Fulbat FTX24HL-BS

Fulbat builds the FTX24HL-BS to the same standards as the rest of its catalogue; what changes between references is capacity, format and terminal position.

In an AGM battery the electrolyte is absorbed in glass-fibre separators: there is no free liquid, it cannot spill and it can be mounted at an angle. That construction lowers internal resistance, speeds up recharging and multiplies cycle life compared with a conventional battery.

Care and maintenance

Check the resting voltage before the season (above 12.6 V on a charged battery) and make sure the terminals are clean and tight. Avoid repeated cranking attempts on a cold bike for long: if it does not start on the third try, let the battery rest for a minute.

Warranty and coverage

The Fulbat FTX24HL-BS comes with the manufacturer's official warranty. The warranty does not cover discharge through prolonged inactivity: if the bike stands for months, use a trickle charger.

Delivery times and returns

Same-day dispatch from our warehouse for in-stock orders placed before 6:00 pm: 24-48 working hours in mainland Spain and Portugal, 3 to 5 days in the islands and the rest of Europe. Returns are accepted for 14 days if the battery has not been used (free collection on the Iberian mainland). You will receive tracking by email.

BCOM-FULBAT-FTX24HL-BS

Data sheet

Brand
FULBAT
Model
FULBAT Motorcycle MF
Voltage (V)
12V
Length
205mm
Width
87mm
Height
162mm
Technology
AGM
Terminal layout
Positive right
Cold cranking amps (EN)
350A
Capacity (C20)
22.10Ah
Capacity (C10)
21Ah (c10)

Specific References

MPN
FTX24HL-BS

Recommended accessories — complement the Fulbat FTX24HL-BS with a charger or tester

How to change the battery

Guide to replace your motorcycle battery in 10-15 minutes. Motorcycle batteries are light (2-5 kg) and usually need an 8 mm wrench.

⏱ 10-15 min🛠 Tools: 8 mm wrench (some bikes use 10 mm) · Protective gloves
  1. Step 1. Prepare the vehicle

    Park on a flat surface, switch off the engine and remove the key. Make sure all lights and electrical accessories are off. Wait 1-2 minutes before starting.

  2. Step 2. Locate the battery compartment

    On motorcycles it is usually under the seat, in the rear cowl or behind a side panel. Check the manual — access varies a lot between models.

  3. Step 3. Disconnect the negative (−) terminal

    Use the 10 mm wrench to loosen the negative cable nut (black, marked −) and remove the cable from the post. Move it aside so it cannot touch any bodywork.

  4. Step 4. Disconnect the positive (+) terminal

    Repeat with the positive cable (red, marked +). Important: never let a terminal touch metal of the car while the other is still connected.

  5. Step 5. Remove the old battery

    Loosen the hold-down clamp or the straps that secure it. Lift the battery carefully — typical weight 2-5 kg. Check the terminals are not corroded before fitting the new one.

  6. Step 6. Install the new battery

    Place the battery in the same orientation as the old one (positive terminal on the same side). Tighten the hold-down clamp firmly.

  7. Step 7. Connect the cables

    Connect the positive (+) terminal first, then the negative (−). Tighten the nuts with the wrench until each terminal does not move. Apply anti-spark grease if you have any.

  8. Step 8. Verify the engine starts

    Close the bonnet. Start the engine to confirm everything works. On cars with Start-Stop or a BMS, you may need to register the battery via OBD so the alternator applies the correct charging profile.

Frequently asked questions

How is the Fulbat FTX24HL-BS battery installed in the vehicle?

In most motorcycles it fits in 15-30 minutes with a 10 mm wrench; if the battery is under the seat or in the boot the time can double. See the step-by-step guide on this page. Quick summary: 1) switch off the engine and remove the key; 2) locate the original battery (engine bay, boot or under seat); 3) disconnect the negative (−) terminal first, then the positive (+); 4) loosen the hold-down clamp and remove the old battery; 5) fit the new one in the same orientation — match the polarity shown on the product sheet; 6) connect the positive (+) first, then the negative (−). On motorcycles with Start-Stop or BMS, register the battery via OBD so the alternator applies the correct charging profile.

How long does the Fulbat FTX24HL-BS battery last?

Expected lifespan of the Fulbat FTX24HL-BS is 4 to 7 years in regular use (depends on technology and climate). In cold regions it drops slightly due to cold-start stress; in very hot regions it also drops because of electrolyte evaporation. To extend its life: avoid deep discharges (headlights on with engine off), have the alternator checked yearly, and keep the battery clean and properly secured.

What are the dimensions of the Fulbat FTX24HL-BS battery?

Dimensions (length × width × height) are 205×87×162 mm — also written as 205x87x162 mm — following the European DIN standard. Always measure the space in your motorcycle before buying: even one extra millimetre can prevent the hold-down clamp from closing. The height shown includes the terminals.

Will the Fulbat FTX24HL-BS battery fit my motorcycle?

Three options to confirm: 1) enter your number plate in the finder (DGT/DVLA/KBA auto-detect your model and engine); 2) check the "Compatible vehicles" tab on this page, where we list every vehicle verified by our technical team; 3) if you cannot find your model, message us on WhatsApp with brand, model, engine and year — we reply during business hours (Mon–Fri 10:00–13:30 and 16:40–18:00 (Spanish time, CET)). The FTX24HL-BS typically fits a wide range of European vehicles thanks to its standard DIN case format.

Which batteries are equivalent to the Fulbat FTX24HL-BS?

Directly interchangeable batteries (same dimensions, same polarity, same Ah and CCA) are the OEM equivalents from leading brands: Bosch, Tudor, Exide and, depending on the model, Banner or Yuasa. Exact equivalence depends on technology — an EFB cannot be replaced with a conventional battery in Start-Stop motorcycles. See the "Equivalents" section to view recommended options at the same performance level.


The top-rated online battery store in Spain

  • 4.5/5 · +11,800 reviews

    Audited by Trustpilot, no filters, no edits. The top-rated battery store in Spain.

    Trustpilot · verified, no filters

  • Official Varta distributor

    Official Varta wholesale distributor. 100% genuine batteries, recently manufactured, best price and no middlemen.

    World’s best-selling battery brand

  • +100,000 satisfied customers

    More than 100,000 customers already trust baterias.com — and recommend us to their friends and family.

    They trust us and recommend us

Choose trust, choose quality, choose baterias.com.