Fulmen FB1100 · Car battery 12V 110Ah 850A
Specifications
| Brand | Fulmen |
|---|---|
| Part number | FB1100 |
| Voltage (V) | 12 |
| Capacity (C20) | 110Ah (c20) |
| Cold cranking amps (EN) | 850A |
| Technology | Lead-acid |
| Length | 392 mm |
| Width | 175 mm |
| Height | 190 mm |
This product is priced on demand to offer you the best available price at all times.
Please contact us to request a quote and we will inform you about availability and the best price on the entire website, as well as the delivery time.
Thank you
Fulmen FB1100 12V 110Ah 850A is a ready-to-use passenger car battery, sealed and maintenance-free. Delivers the cranking amps the engine needs in cold weather and keeps stable voltage for modern car loads (ECU, sensors, climate control, infotainment).
Why this car battery?
- Original-equipment qualitywithout dealership prices
- Lasts 4 to 6 yearsbuy once instead of twice
- Real human tech supportif you have any doubts before buying
Voltage
12 V
Capacity
110 Ah
Cold cranking
850 A
Dimensions
392×175×190 mm
Technology
Lead-acid
Polarity
Positive on the right
Weight
26,3 kg
Model
FULMEN Formula
Free quote, no obligation
Request a quote for your Car battery Fulmen FB1100 12V 110Ah 850A
- Reply in under 24 working hours
- Best price guaranteed
Car battery Fulmen FB1100 Formula 110Ah 850A 12V
12VVoltage
110AhCapacity
850ACold cranking
26.30kgWeight
The Fulmen FB1100 car battery is rated at 12 V, 110 Ah and 850 A of cold cranking current (EN) from the Formula range, and is designed for passenger cars with conventional starting, without a Start-Stop system. Measuring 392 × 175 × 190 mm and the positive terminal on the right, it is the direct replacement for cars fitted from the factory with a 110 Ah battery of this format.
- Good balance of capacity, cranking power and price.
- Stable voltage for the vehicle electronics (ECU, sensors, climate control).
- Low self-discharge: copes with long stops without losing charge.
- Designed to last several years under normal daily use.
Will it fit your current battery tray?
It has external dimensions of 392 × 175 × 190 mm and weighs 26.30 kg. The positive terminal on the right decides which side the cables end up on: it is the detail that causes most buying mistakes, so check it before ordering. It uses a B13 hold-down, the system that anchors and connects it in the vehicle. Checking the three dimensions and the terminal position before buying avoids the most common mistake when replacing a battery.
What the Fulmen FB1100 is for
Designed for passenger cars with conventional starting, without a Start-Stop system, the Fulmen FB1100 is the direct replacement when your vehicle uses a 110 Ah battery of this format. Before buying, compare dimensions, terminals and capacity with the battery you are replacing. Check that it matches your current battery in dimensions, terminals and hold-down: this reference has a weight of 26.30 kg and B13 hold-down.
The Fulmen FB1100: Formula range and conventional lead-acid technology
Within the Fulmen catalogue, the Formula series groups the references designed for this use. The FB1100 is the 110 Ah model of that family, with the same performance as its siblings in other sizes.
Conventional lead-acid is the benchmark against which other technologies are compared: good cranking current, great tolerance to alternator charging and the best price per amp-hour.
What Fulmen does differently
With more than a century of history, Fulmen offers complete ranges for cars, trucks, motorcycles and leisure with the industrial quality of the Exide group. All the Fulmen batteries in our catalogue are genuine product, recently manufactured and covered by the manufacturer's warranty.
Warranty and coverage
The Fulmen FB1100 comes with the manufacturer's official warranty against manufacturing defects; the exact period is stated in the brand's conditions. If it fails through a defect within the period, we replace it free of charge.
Care and maintenance
Avoid leaving lights or accessories on with the engine off: most batteries fail not through defects but through repeated deep discharges. Keep the terminals clean and tight, and check that the resting voltage does not drop below 12.4 V: below that it is time to recharge.
When you get it and how to return it
Same-day dispatch from our warehouse for in-stock orders placed before 6:00 pm: 24-48 working hours in mainland Spain and Portugal, 3 to 5 days in the islands and the rest of Europe. Returns are accepted for 14 days if the battery has not been used (free collection on the Iberian mainland). You will receive tracking by email.
BCOM-FULMEN-FB1100
Data sheet
- Brand
- FULMEN
- Reference
- FB1100
- Model
- FULMEN Formula
- Voltage (V)
- 12
- Length
- 392 mm
- Width
- 175 mm
- Height
- 190 mm
- Weight
- 26.30 Kgs
- Technology
- Lead-acid
- EAN
- 3661024046237
- Terminal layout
- Positive terminal on the right
- Hold-down
- B13
- Cold cranking amps (EN)
- 850A
- Capacity (C20)
- 110Ah (c20)
- Case type
- L06
Specific References
- EAN13
- 3661024046237
- MPN
- FB1100
Most searched
Loading OEM references…
Comparison: Fulmen FB1100 vs equivalents
The Fulmen FB1100 is interchangeable with these equivalent references: EB1100 (Exide), LA105 (Varta), I1 (Varta), H15 (Varta), TL1050 (Tudor), TK1050 (Tudor).
| Product | Specifications | Technology | Price |
|---|---|---|---|
Fulmen
FB1100
This battery
|
12V 110Ah 850A | Lead-acid | |
Exide
EB1100
|
12V 110Ah 920A | Lead-acid | €115.70 |
Varta
LA105
|
12V 105Ah 950A | AGM | €243.90 |
Varta
I1
|
12V 110Ah 920A | Lead-acid | €123.70 |
Varta
H15
|
12V 105Ah 950A | AGM | €172.80 |
Tudor
TL1050
|
12V 105Ah 950A | EFB | €127.40 |
Tudor
TK1050
|
12V 106Ah 950A | AGM | €210.30 |
Equivalences verified by our technical team: same dimensions, polarity, capacity and CCA. Official manufacturer warranty on every option.
Codes and references Fulmen FB1100
| Brand | Fulmen |
|---|---|
| Manufacturer range | FULMEN Formula |
| Manufacturer part number (MPN) | FB1100 |
| EAN-13 barcode | 3661024046237 |
| European case size (EN 50342-2) | L6 |
| Dimensions (length × width × height) | 392 × 175 × 190 mm (392x175x190) |
Recommended accessories
How to change the battery
Step-by-step guide to replace your car battery in 15-30 minutes (longer if the battery is under the seat or in the boot) without losing vehicle settings.
Step 1. Prepare the vehicle
Park on a flat surface, switch off the engine and remove the key. Make sure all lights and electrical accessories are off. Wait 1-2 minutes before starting.
Step 2. Locate the battery
Open the bonnet. The battery is usually in the engine bay, but in many modern cars it may be in the boot or under the passenger seat. Check the manual if you cannot find it.
Step 3. Disconnect the negative (−) terminal
Use the 10 mm wrench to loosen the negative cable nut (black, marked −) and remove the cable from the post. Move it aside so it cannot touch any bodywork.
Step 4. Disconnect the positive (+) terminal
Repeat with the positive cable (red, marked +). Important: never let a terminal touch metal of the car while the other is still connected.
Step 5. Remove the old battery
Loosen the bottom hold-down clamp with the same wrench. Lift the battery carefully (it can weigh 15-25 kg). Clean the tray with a brush and baking soda if there is corrosion.
Step 6. Install the new battery
Place the battery in the same orientation as the old one (positive terminal on the same side). Tighten the hold-down clamp firmly.
Step 7. Connect the cables
Connect the positive (+) terminal first, then the negative (−). Tighten the nuts with the wrench until each terminal does not move. Apply anti-spark grease if you have any.
Step 8. Verify the engine starts
Close the bonnet. Start the engine to confirm everything works. On cars with Start-Stop or a BMS, you may need to register the battery via OBD so the alternator applies the correct charging profile.
Frequently asked questions
How is the Fulmen FB1100 battery installed in the vehicle?
In most cars it fits in 15-30 minutes with a 10 mm wrench; if the battery is under the seat or in the boot the time can double. See the step-by-step guide on this page. Quick summary: 1) switch off the engine and remove the key; 2) locate the original battery (engine bay, boot or under seat); 3) disconnect the negative (−) terminal first, then the positive (+); 4) loosen the hold-down clamp and remove the old battery; 5) fit the new one in the same orientation — match the polarity shown on the product sheet; 6) connect the positive (+) first, then the negative (−). On cars with Start-Stop or BMS, register the battery via OBD so the alternator applies the correct charging profile.
What is the service life of the FB1100 model?
Expected lifespan of the Fulmen FB1100 is 4 to 6 years in regular car use without Start-Stop. In cold regions it drops slightly due to cold-start stress; in very hot regions it also drops because of electrolyte evaporation. To extend its life: avoid deep discharges (headlights on with engine off), have the alternator checked yearly, and keep the battery clean and properly secured.
What are the dimensions of the Fulmen FB1100 battery?
Dimensions (length × width × height) are 392×175×190 mm — also written as 392x175x190 mm and correspond to the European L6 case size — following the European DIN standard. Always measure the space in your car before buying: even one extra millimetre can prevent the hold-down clamp from closing. The height shown includes the terminals.
Is the FB1100 valid for my vehicle?
Three options to confirm: 1) enter your number plate in the finder (DGT/DVLA/KBA auto-detect your model and engine); 2) check the "Compatible vehicles" tab on this page, where we list every vehicle verified by our technical team; 3) if you cannot find your model, message us on WhatsApp with brand, model, engine and year — we reply during business hours (Mon–Fri 10:00–13:30 and 16:40–18:00 (Spanish time, CET)). The FB1100 typically fits a wide range of European vehicles thanks to its standard DIN case format.
What are the equivalents of the FB1100 model?
Directly interchangeable batteries (same dimensions, same polarity, same Ah and CCA) are the OEM equivalents from leading brands: Bosch, Tudor, Exide and, depending on the model, Banner or Yuasa. Exact equivalence depends on technology — an EFB cannot be replaced with a conventional battery in Start-Stop cars. See the "Equivalents" section to view recommended options at the same performance level.
The top-rated online battery store in Spain
-
Audited by Trustpilot, no filters, no edits. The top-rated battery store in Spain.
Trustpilot · verified, no filters
-
Official Varta distributor
Official Varta wholesale distributor. 100% genuine batteries, recently manufactured, best price and no middlemen.
World’s best-selling battery brand
-
+100,000 satisfied customers
More than 100,000 customers already trust baterias.com — and recommend us to their friends and family.
They trust us and recommend us
Choose trust, choose quality, choose baterias.com.