Fulmen FF1853 PowerPRO · Truck battery 185Ah 1150A

Truck battery Fulmen FF1853 PowerPRO 185Ah 1,150A 12V

The Fulmen FF1853 with conventional lead-acid technology delivers 185 Ah at 12 V and 1,150 A of cold cranking current (EN): what trucks, buses, tractors and heavy machinery demand. Measuring 513 × 223 × 223 mm and the positive terminal on the left, it is the direct replacement for trucks fitted from the factory with a 185 Ah battery of this format.

In short: the Fulmen FF1853 (185 Ah, 1150 A, 513 × 223 × 223 mm, positive terminal on the left). Verified equivalent alternatives: Tudor TF1853 and Exide EF1853.

• Powers tachograph, fridge and heater during rest stops.
• Better tolerance to deep discharge than a conventional starter battery.
• Good balance of capacity, cranking power and price.
• Resistant to constant chassis vibration.

What the Fulmen FF1853 is for

Designed for trucks, buses, tractors and heavy machinery, the Fulmen FF1853 withstands constant chassis vibration and discharges during stops with active loads. Check that it matches your current battery in dimensions, terminals and hold-down: this reference has a weight of 43.90 kg, 1 terminals and B00 hold-down.

The Fulmen FF1853: PowerPRO range and conventional lead-acid technology

The FF1853 is part of the Fulmen PowerPRO range. Choosing the right reference within the series comes down to capacity, dimensions and terminals: technology and quality are common to the whole family.

Conventional lead-acid is the benchmark against which other technologies are compared: good cranking current, great tolerance to alternator charging and the best price per amp-hour.

Size, terminals and hold-down of the Fulmen FF1853

The Fulmen FF1853 is made in the 513 × 223 × 223 mm format and weighs 43.90 kg. The positive terminal on the left decides which side the cables end up on: it is the detail that causes most buying mistakes, so check it before ordering. It uses a B00 hold-down and 1 terminals, the system that anchors and connects it in the vehicle. Before replacing it, measure your current battery tray: if all three dimensions and the terminal positions match, the swap is direct and needs no adapters.

Why choose Fulmen batteries

Fulmen is the historic French brand of the Exide group: batteries made on the same lines and with the same technology as original equipment, widely used by workshops across Europe. All the Fulmen batteries in our catalogue are genuine product, recently manufactured and covered by the manufacturer's warranty.

Care and maintenance

During rest stops with active loads, avoid repeated deep discharges: they shorten the life of any starter battery. In 24 V installations, check periodically that both batteries show the same voltage; an imbalance means one is failing.

Official warranty

The Fulmen FF1853 comes with the manufacturer's official warranty against manufacturing defects. An important note for commercial vehicles: most trucks use two batteries connected in series (24 V installation). If you replace only one, the new battery works alongside the old one, which has already lost capacity; that imbalance shortens its life and the manufacturer may treat it as misuse. Always replace both at the same time.

Delivery times and returns

Orders placed before 6:00 pm with the battery in stock ship the same day. Delivery in mainland Spain and Portugal takes 24-48 working hours; for the Balearic Islands and the rest of the European Union allow 3 to 5 working days. You have 14 days to return an unused battery; in mainland Spain and Portugal collection is free. We email you the tracking number as soon as the parcel ships.