Mk powered ES1.9-12 · Wheelchair battery 12V 2.3Ah AGM
Specifications
| Brand | MK POWERED |
|---|---|
| Part number | ES1.9-12 |
| Voltage (V) | 12 |
| Capacity (C20) | 2.3Ah (c20) |
| Capacity (C5) | 1.955Ah (c5) |
| Technology | AGM |
| Length | 178.10 mm |
| Width | 34.00 mm |
| Height | 66.00 mm |
€30.30
VAT included
4,79/5★★★★★37 reviewsVerified purchases
- ★★★★★Samuel Parra:
Excelente asesoramiento
- ★★★★★Rodrigo Guerrero:
Pedí la batería en Viernes y el Lunes ya la tenía aquí
- ★★★★★Agustin Saez:
Ya me había encantado que me ayudaran con la elección de la MK ES1.9-12, pero es que encima me asesoraron al momento de instalarla. Todo…
MK Powered ES1.9-12 12V 2Ah is a deep-cycle battery for wheelchairs and mobility scooters, optimised to be discharged and recharged daily down to 80 % DOD without losing range.
Why this wheelchair battery?
- Daily cycling without wearhandles deep discharges without losing capacity
- Sealed AGM/GELno maintenance, no risk of spills
- Thousands of useful cyclesover its full lifetime
Voltage
12 V
Capacity
2 Ah
Dimensions
178×34×66 mm
Technology
AGM
Weight
1,04 kg
Model
MK AGM
Mobility battery MK Powered ES1.9-12 Mk AGM 2.3Ah 12V
12VVoltage
2.3AhCapacity
1.04kgWeight
The MK Powered ES1.9-12 with AGM technology delivers 2.3 Ah at 12 V with the cycle life that power wheelchairs, mobility scooters and light electric vehicles demand. It replaces the original battery without adaptation in power wheelchairs and mobility scooters with a 178 × 34 × 66 mm format: same 2.3 Ah capacity.
- Thousands of useful cycles over its lifetime.
- Standard replacement format for wheelchairs and scooters.
- AGM technology: absorbed electrolyte, no spills, can be mounted at an angle.
- Designed to be discharged and recharged daily without losing capacity.
What the MK Powered ES1.9-12 is for
The MK Powered ES1.9-12 is designed for power wheelchairs, mobility scooters and light electric vehicles. Wheelchairs and scooters normally use two identical batteries in series: replace them together. Check that it matches your current battery in dimensions, terminals and hold-down: this reference has a weight of 1.04 kg and F1 terminals.
Dimensions, polarity and mounting
It has external dimensions of 178 × 34 × 66 mm and weighs 1.04 kg. It uses F1 terminals, the system that anchors and connects it in the vehicle. Before replacing it, measure your current battery tray: if all three dimensions and the terminal positions match, the swap is direct and needs no adapters.
The MK Powered ES1.9-12: Mk AGM range and AGM technology
The Mk AGM is the MK Powered range the ES1.9-12 belongs to: it shares the same construction and quality criteria with the rest of the series, and varies in capacity and format to suit each vehicle.
AGM (Absorbent Glass Mat) technology seals the electrolyte in glass microfibre. The result is a maintenance-free battery that is highly vibration-resistant and able to withstand deep discharges that would ruin a classic lead-acid battery.
What MK Powered does differently
MK batteries are the standard in the electric mobility sector: sealed, approved for air transport and with the consistency that wheelchair manufacturers demand as original equipment. At baterias.com we work directly with the manufacturer or its official distributor: real stock, brand-new product and official warranty.
Official warranty
The MK Powered ES1.9-12 comes with the manufacturer's official warranty against manufacturing defects. If it fails through a defect within the warranty period, we replace it at no cost to you.
Usage and maintenance tips
Charge with a charger that has an AGM mode: it limits the voltage and protects the glass-fibre separators. Recharge the wheelchair or scooter after each use and do not leave it discharged for days: lead sulphates and loses capacity.
Shipping, delivery and returns
Orders placed before 6:00 pm with the battery in stock ship the same day. Delivery in mainland Spain and Portugal takes 24-48 working hours; for the Balearic and Canary Islands and the rest of the European Union allow 3 to 5 working days. You have 14 days to return an unused battery; in mainland Spain and Portugal collection is free. We email you the tracking number as soon as the parcel ships.
BCOM-MK-ES1.9-12
Data sheet
- Brand
- MK
- Reference
- ES1.9-12
- Model
- MK AGM
- Voltage (V)
- 12
- Length
- 178.10 mm
- Width
- 34.00 mm
- Height
- 66.00 mm
- Weight
- 1.04 Kgs
- Technology
- AGM
- Terminal type
- F1
- Capacity (C20)
- 2.3Ah (c20)
- Capacity (C5)
- 1.955Ah (c5)
Specific References
- MPN
- ES1.9-12
4,79/5
Verified purchasesLatest verified reviews
★★★★★Samuel Parra
15/07/2026Me asesoraron en la batería
Excelente asesoramiento
★★★★★Rodrigo Guerrero
14/02/2026Entregada en tiempo
Pedí la batería en Viernes y el Lunes ya la tenía aquí
★★★★★Agustin Saez
15/01/2026Trato y ayuda inmejorable, gracias
Ya me había encantado que me ayudaran con la elección de la MK ES1.9-12, pero es que encima me asesoraron al momento de instalarla. Todo de 10
★★★★★Jose Maria Roman
28/12/2025Excelente tienda de baterías de coches
Resultó facil instalar la batería en mi coche gracias a su asesoría. Web 100% recomendada
Recommended accessories
How to change the battery
Guide to replace a cyclic battery (12V 4-30Ah) for UPS, mobility scooter, alarm or backup device. Estimated time 10-15 minutes. Important: discharge residual voltage before handling.
Step 1. Power off and unplug the device
Unplug the device (UPS, scooter, alarm) and leave it off for at least 30 seconds to discharge residual capacitor voltage. Work on an insulating surface.
Step 2. Locate the battery compartment
Usually under the seat (mobility scooter/wheelchair), in the rear module of the UPS, or behind a side panel with screws. Check the device manual for unusual models.
Step 3. Disconnect the negative (−) first
With insulated gloves, remove the negative (−) cable first. Some UPS have protection fuses — note their position before removing.
Step 4. Disconnect the positive (+) terminal
Repeat with the positive cable (red, marked +). Important: never let a terminal touch metal of the car while the other is still connected.
Step 5. Remove the old battery
Typical weight 1-15 kg depending on capacity. Many cyclic batteries are AGM/GEL — keep them upright. Do NOT invert the battery: even sealed, residue may exist.
Step 6. Fit the new battery
Same orientation and type (AGM, GEL or flooded). Polarity must match the device, not a chassis (this is not a car). Make sure terminals do not touch metal parts of the compartment.
Step 7. Connect the positive (+) first
On cyclic devices the order is reversed compared to cars: positive (+) first, negative (−) afterwards. Tighten without forcing — the plastic terminal housing of cyclic batteries damages easily.
Step 8. Initial charge before first use
Cyclic batteries ship at 60-80%. Before first use, connect the device charger for 8-12 hours (or use an AGM/GEL smart charger if available). This avoids short cycles and extends lifespan.
Frequently asked questions
Is this battery AGM? What is it for?
Yes. The ES1.9-12 from MK Powered uses AGM (Absorbent Glass Mat) technology: a sealed lead-acid battery where the electrolyte is absorbed in a glass-fibre mat. It withstands more charge/discharge cycles than a conventional one, handles heat better and is the required technology for devices with advanced Start-Stop and regenerative braking. Expected lifespan: 5-8 years under normal conditions.
How do I change this battery step by step?
In most devices it fits in 15-30 minutes with a 10 mm wrench; if the battery is under the seat or in the boot the time can double. See the step-by-step guide on this page. Quick summary: 1) switch off the engine and remove the key; 2) locate the original battery (engine bay, boot or under seat); 3) disconnect the negative (−) terminal first, then the positive (+); 4) loosen the hold-down clamp and remove the old battery; 5) fit the new one in the same orientation — match the polarity shown on the product sheet; 6) connect the positive (+) first, then the negative (−). On devices with Start-Stop or BMS, register the battery via OBD so the alternator applies the correct charging profile.
What is the service life of the ES1.9-12 model?
Expected lifespan of the MK Powered ES1.9-12 is 5 to 8 years in mild-climate device use with Start-Stop. In cold regions it drops slightly due to cold-start stress; in very hot regions it also drops because of electrolyte evaporation. To extend its life: avoid deep discharges (headlights on with engine off), have the alternator checked yearly, and keep the battery clean and properly secured.
What are the measurements of the ES1.9-12 model?
Dimensions (length × width × height) are 178×34×66 mm — also written as 178x34x66 mm — following the European DIN standard. Always measure the space in your device before buying: even one extra millimetre can prevent the hold-down clamp from closing. The height shown includes the terminals.
Which batteries are equivalent to the MK Powered ES1.9-12?
Directly interchangeable batteries (same dimensions, same polarity, same Ah and CCA) are the OEM equivalents from leading brands: Bosch, Tudor, Exide and, depending on the model, Banner or Yuasa. Exact equivalence depends on technology — an EFB cannot be replaced with a conventional battery in Start-Stop devices. See the "Equivalents" section to view recommended options at the same performance level.
The top-rated online battery store in Spain
-
Audited by Trustpilot, no filters, no edits. The top-rated battery store in Spain.
Trustpilot · verified, no filters
-
Official Varta distributor
Official Varta wholesale distributor. 100% genuine batteries, recently manufactured, best price and no middlemen.
World’s best-selling battery brand
-
+100,000 satisfied customers
More than 100,000 customers already trust baterias.com — and recommend us to their friends and family.
They trust us and recommend us
Choose trust, choose quality, choose baterias.com.