Mk powered ES26-12T · Wheelchair battery 12V 26Ah AGM
Specifications
| Brand | MK POWERED |
|---|---|
| Part number | ES26-12T |
| Voltage (V) | 12 |
| Capacity (C20) | 26Ah (c20) |
| Capacity (C5) | 22.1Ah (c5) |
| Technology | AGM |
| Length | 166.10 mm |
| Width | 125.50 mm |
| Height | 176.00 mm |
€93.90
VAT included
4,65/5★★★★★8 reviewsVerified purchases
- ★★★★★Miguel Angel Navarro:
Gracias por el asesoramiento
- ★★★★Jose Carlos PeÑa:
Supe cual batería necesitaba mi coche gracias a su asesoría
- ★★★★Gonzalo Nieto:
Resuelven tus dudas y te ayudan con la instalación
MK Powered ES26-12T 12V 26Ah is a sealed AGM/GEL battery for daily mobility use: maintenance-free, no risk of spills, and thousands of useful cycles well beyond a starter battery.
Why this wheelchair battery?
- Daily cycling without wearhandles deep discharges without losing capacity
- Sealed AGM/GELno maintenance, no risk of spills
- Thousands of useful cyclesover its full lifetime
Voltage
12 V
Capacity
26 Ah
Dimensions
166×125×176 mm
Technology
AGM
Weight
9,16 kg
Model
MK AGM
Mobility battery MK Powered ES26-12T Mk AGM 26Ah 12V
12VVoltage
26AhCapacity
9.16kgWeight
The 12 V, 26 Ah MK Powered ES26-12T from the Mk AGM range with AGM technology is the standard replacement for power wheelchairs, mobility scooters and light electric vehicles. It measures 166 × 125 × 176 mm, the format sought by anyone replacing a 26 Ah battery in power wheelchairs and mobility scooters.
- Standard replacement format for wheelchairs and scooters.
- Thousands of useful cycles over its lifetime.
- Designed to be discharged and recharged daily without losing capacity.
- AGM technology: absorbed electrolyte, no spills, can be mounted at an angle.
What the MK Powered ES26-12T is for
With 26 Ah, the MK Powered ES26-12T offers the daily range that power wheelchairs, mobility scooters and light electric vehicles need, with a sealed construction that is safe indoors. Check that it matches your current battery in dimensions, terminals and hold-down: this reference has a weight of 9.16 kg.
Will it fit your current battery tray?
In terms of format, the MK Powered ES26-12T measures 166 × 125 × 176 mm (length × width × height) and weighs 9.16 kg. Before replacing it, measure your current battery tray: if all three dimensions and the terminal positions match, the swap is direct and needs no adapters.
The MK Powered ES26-12T: Mk AGM range and AGM technology
The Mk AGM is the MK Powered range the ES26-12T belongs to: it shares the same construction and quality criteria with the rest of the series, and varies in capacity and format to suit each vehicle.
AGM means the acid is held in a glass mat instead of floating free. That is why the battery can be installed in the cabin without gases, survives more cycles and recovers its charge quickly.
MK Powered: the maker behind the ES26-12T
MK Battery (MK Powered) is the US specialist in AGM and GEL batteries for mobility: power wheelchairs, scooters and medical equipment rely on its batteries for safety and cycle life. At baterias.com we work directly with the manufacturer or its official distributor: real stock, brand-new product and official warranty.
Manufacturer's warranty
The MK Powered ES26-12T comes with the manufacturer's official warranty against manufacturing defects. If it fails through a defect within the warranty period, we replace it at no cost to you.
How to make it last longer
Charge with a charger that has an AGM mode: it limits the voltage and protects the glass-fibre separators. Use the original charger or one compatible with the battery technology (AGM/GEL) and always replace both batteries in the set together.
Delivery times and returns
Orders placed before 6:00 pm with the battery in stock ship the same day. Delivery in mainland Spain and Portugal takes 24-48 working hours; for the Balearic and Canary Islands and the rest of the European Union allow 3 to 5 working days. You have 14 days to return an unused battery; in mainland Spain and Portugal collection is free. We email you the tracking number as soon as the parcel ships.
BCOM-MK-ES26-12T
Data sheet
- Brand
- MK
- Reference
- ES26-12T
- Model
- MK AGM
- Voltage (V)
- 12
- Length
- 166.10 mm
- Width
- 125.50 mm
- Height
- 176.00 mm
- Weight
- 9.16 Kgs
- Technology
- AGM
- Capacity (C20)
- 26Ah (c20)
- Capacity (C5)
- 22.1Ah (c5)
Specific References
- MPN
- ES26-12T
4,65/5
Verified purchasesLatest verified reviews
★★★★★Miguel Angel Navarro
17/09/2026Su ayuda fue valiosa
Gracias por el asesoramiento
★★★★★Jose Carlos PeÑa
07/02/20265 estrellas
Supe cual batería necesitaba mi coche gracias a su asesoría
★★★★★Gonzalo Nieto
06/02/2026Me ayudaron con la instalación
Resuelven tus dudas y te ayudan con la instalación
Recommended accessories
How to change the battery
Guide to replace a cyclic battery (12V 4-30Ah) for UPS, mobility scooter, alarm or backup device. Estimated time 10-15 minutes. Important: discharge residual voltage before handling.
Step 1. Power off and unplug the device
Unplug the device (UPS, scooter, alarm) and leave it off for at least 30 seconds to discharge residual capacitor voltage. Work on an insulating surface.
Step 2. Locate the battery compartment
Usually under the seat (mobility scooter/wheelchair), in the rear module of the UPS, or behind a side panel with screws. Check the device manual for unusual models.
Step 3. Disconnect the negative (−) first
With insulated gloves, remove the negative (−) cable first. Some UPS have protection fuses — note their position before removing.
Step 4. Disconnect the positive (+) terminal
Repeat with the positive cable (red, marked +). Important: never let a terminal touch metal of the car while the other is still connected.
Step 5. Remove the old battery
Typical weight 1-15 kg depending on capacity. Many cyclic batteries are AGM/GEL — keep them upright. Do NOT invert the battery: even sealed, residue may exist.
Step 6. Fit the new battery
Same orientation and type (AGM, GEL or flooded). Polarity must match the device, not a chassis (this is not a car). Make sure terminals do not touch metal parts of the compartment.
Step 7. Connect the positive (+) first
On cyclic devices the order is reversed compared to cars: positive (+) first, negative (−) afterwards. Tighten without forcing — the plastic terminal housing of cyclic batteries damages easily.
Step 8. Initial charge before first use
Cyclic batteries ship at 60-80%. Before first use, connect the device charger for 8-12 hours (or use an AGM/GEL smart charger if available). This avoids short cycles and extends lifespan.
Frequently asked questions
Is the MK Powered ES26-12T an AGM battery and what are the benefits of AGM?
Yes. The ES26-12T from MK Powered uses AGM (Absorbent Glass Mat) technology: a sealed lead-acid battery where the electrolyte is absorbed in a glass-fibre mat. It withstands more charge/discharge cycles than a conventional one, handles heat better and is the required technology for devices with advanced Start-Stop and regenerative braking. Expected lifespan: 5-8 years under normal conditions.
How is the MK Powered ES26-12T battery installed in the vehicle?
In most devices it fits in 15-30 minutes with a 10 mm wrench; if the battery is under the seat or in the boot the time can double. See the step-by-step guide on this page. Quick summary: 1) switch off the engine and remove the key; 2) locate the original battery (engine bay, boot or under seat); 3) disconnect the negative (−) terminal first, then the positive (+); 4) loosen the hold-down clamp and remove the old battery; 5) fit the new one in the same orientation — match the polarity shown on the product sheet; 6) connect the positive (+) first, then the negative (−). On devices with Start-Stop or BMS, register the battery via OBD so the alternator applies the correct charging profile.
How long does the MK Powered ES26-12T battery last?
Expected lifespan of the MK Powered ES26-12T is 5 to 8 years in mild-climate device use with Start-Stop. In cold regions it drops slightly due to cold-start stress; in very hot regions it also drops because of electrolyte evaporation. To extend its life: avoid deep discharges (headlights on with engine off), have the alternator checked yearly, and keep the battery clean and properly secured.
What are the dimensions of the MK Powered ES26-12T battery?
Dimensions (length × width × height) are 166×126×176 mm — also written as 166x126x176 mm — following the European DIN standard. Always measure the space in your device before buying: even one extra millimetre can prevent the hold-down clamp from closing. The height shown includes the terminals.
Which batteries are equivalent to the MK Powered ES26-12T?
Directly interchangeable batteries (same dimensions, same polarity, same Ah and CCA) are the OEM equivalents from leading brands: Bosch, Tudor, Exide and, depending on the model, Banner or Yuasa. Exact equivalence depends on technology — an EFB cannot be replaced with a conventional battery in Start-Stop devices. See the "Equivalents" section to view recommended options at the same performance level.
The top-rated online battery store in Spain
-
Audited by Trustpilot, no filters, no edits. The top-rated battery store in Spain.
Trustpilot · verified, no filters
-
Official Varta distributor
Official Varta wholesale distributor. 100% genuine batteries, recently manufactured, best price and no middlemen.
World’s best-selling battery brand
-
+100,000 satisfied customers
More than 100,000 customers already trust baterias.com — and recommend us to their friends and family.
They trust us and recommend us
Choose trust, choose quality, choose baterias.com.