Mk powered ES3-12R · Wheelchair battery 12V 2.8Ah AGM
Specifications
| Brand | MK POWERED |
|---|---|
| Part number | ES3-12R |
| Voltage (V) | 12 |
| Capacity (C20) | 2.8Ah (c20) |
| Capacity (C5) | 2.38Ah (c5) |
| Technology | AGM |
| Length | 133.10 mm |
| Width | 33.00 mm |
| Height | 103.90 mm |
€48.70
VAT included
4,79/5★★★★★23 reviewsVerified purchases
- ★★★★Enrique Hidalgo:
Resuelven tus dudas y te ayudan con la instalación
- ★★★★★Emilio Esteban:
Supe cual batería necesitaba mi coche gracias a su asesoría
- ★★★★★Miguel Iglesias:
Gracias por el asesoramiento
MK Powered ES3-12R 12V 2Ah is a sealed AGM/GEL battery for daily mobility use: maintenance-free, no risk of spills, and thousands of useful cycles well beyond a starter battery.
Why this wheelchair battery?
- Daily cycling without wearhandles deep discharges without losing capacity
- Sealed AGM/GELno maintenance, no risk of spills
- Thousands of useful cyclesover its full lifetime
Voltage
12 V
Capacity
2 Ah
Dimensions
133×33×103 mm
Technology
AGM
Weight
1,12 kg
Model
MK AGM
Mobility battery MK Powered ES3-12R Mk AGM 2.8Ah 12V
12VVoltage
2.8AhCapacity
1.12kgWeight
The MK Powered ES3-12R with AGM technology delivers 2.8 Ah at 12 V with the cycle life that power wheelchairs, mobility scooters and light electric vehicles demand. Measuring 133 × 33 × 103 mm, it is the direct replacement for power wheelchairs and mobility scooters fitted from the factory with a 2.8 Ah battery of this format.
- AGM: faster recharging and better cycle resistance than a conventional battery.
- Sealed AGM/GEL: safe indoors and in transport.
- No maintenance, no water top-ups.
- Approved for air and sea transport (VRLA).
Will it fit your current battery tray?
In terms of format, the MK Powered ES3-12R measures 133 × 33 × 103 mm (length × width × height) and weighs 1.12 kg. Checking the three dimensions and the terminal position before buying avoids the most common mistake when replacing a battery.
What the MK Powered ES3-12R is for
With 2.8 Ah, the MK Powered ES3-12R offers the daily range that power wheelchairs, mobility scooters and light electric vehicles need, with a sealed construction that is safe indoors. Check that it matches your current battery in dimensions, terminals and hold-down: this reference has a weight of 1.12 kg.
The MK Powered ES3-12R: Mk AGM range and AGM technology
The Mk AGM is the MK Powered range the ES3-12R belongs to: it shares the same construction and quality criteria with the rest of the series, and varies in capacity and format to suit each vehicle.
AGM means the acid is held in a glass mat instead of floating free. That is why the battery can be installed in the cabin without gases, survives more cycles and recovers its charge quickly.
MK Powered: the maker behind the ES3-12R
MK Battery (MK Powered) is the US specialist in AGM and GEL batteries for mobility: power wheelchairs, scooters and medical equipment rely on its batteries for safety and cycle life. We guarantee that every MK Powered arrives new, charged and with the manufacturer's full warranty.
Official warranty
The MK Powered ES3-12R comes with the manufacturer's official warranty against manufacturing defects. If it fails through a defect within the warranty period, we replace it at no cost to you.
How to make it last longer
Use the original charger or one compatible with the battery technology (AGM/GEL) and always replace both batteries in the set together. Recharge the wheelchair or scooter after each use and do not leave it discharged for days: lead sulphates and loses capacity.
Shipping, delivery and returns
Order before 6:00 pm with stock available and it leaves today: mainland Spain and Portugal receive it in 24-48 working hours, the islands and the rest of the EU in 3 to 5 days. You have 14 days to return it if it has not been installed, with free collection on the mainland, and shipment tracking by email.
BCOM-MK-ES3-12R
Data sheet
- Brand
- MK
- Reference
- ES3-12R
- Model
- MK AGM
- Voltage (V)
- 12
- Length
- 133.10 mm
- Width
- 33.00 mm
- Height
- 103.90 mm
- Weight
- 1.12 Kgs
- Technology
- AGM
- Capacity (C20)
- 2.8Ah (c20)
- Capacity (C5)
- 2.38Ah (c5)
Specific References
- MPN
- ES3-12R
4,79/5
Verified purchasesLatest verified reviews
★★★★★Enrique Hidalgo
05/02/2026Gran asesoría
Resuelven tus dudas y te ayudan con la instalación
★★★★★Emilio Esteban
15/01/2026Recomendado
Supe cual batería necesitaba mi coche gracias a su asesoría
★★★★★Miguel Iglesias
13/10/2025Buen asesoramiento
Gracias por el asesoramiento
Recommended accessories
How to change the battery
Guide to replace a cyclic battery (12V 4-30Ah) for UPS, mobility scooter, alarm or backup device. Estimated time 10-15 minutes. Important: discharge residual voltage before handling.
Step 1. Power off and unplug the device
Unplug the device (UPS, scooter, alarm) and leave it off for at least 30 seconds to discharge residual capacitor voltage. Work on an insulating surface.
Step 2. Locate the battery compartment
Usually under the seat (mobility scooter/wheelchair), in the rear module of the UPS, or behind a side panel with screws. Check the device manual for unusual models.
Step 3. Disconnect the negative (−) first
With insulated gloves, remove the negative (−) cable first. Some UPS have protection fuses — note their position before removing.
Step 4. Disconnect the positive (+) terminal
Repeat with the positive cable (red, marked +). Important: never let a terminal touch metal of the car while the other is still connected.
Step 5. Remove the old battery
Typical weight 1-15 kg depending on capacity. Many cyclic batteries are AGM/GEL — keep them upright. Do NOT invert the battery: even sealed, residue may exist.
Step 6. Fit the new battery
Same orientation and type (AGM, GEL or flooded). Polarity must match the device, not a chassis (this is not a car). Make sure terminals do not touch metal parts of the compartment.
Step 7. Connect the positive (+) first
On cyclic devices the order is reversed compared to cars: positive (+) first, negative (−) afterwards. Tighten without forcing — the plastic terminal housing of cyclic batteries damages easily.
Step 8. Initial charge before first use
Cyclic batteries ship at 60-80%. Before first use, connect the device charger for 8-12 hours (or use an AGM/GEL smart charger if available). This avoids short cycles and extends lifespan.
Frequently asked questions
Is the ES3-12R model AGM? What does this technology offer?
Yes. The ES3-12R from MK Powered uses AGM (Absorbent Glass Mat) technology: a sealed lead-acid battery where the electrolyte is absorbed in a glass-fibre mat. It withstands more charge/discharge cycles than a conventional one, handles heat better and is the required technology for devices with advanced Start-Stop and regenerative braking. Expected lifespan: 5-8 years under normal conditions.
How is the MK Powered ES3-12R battery installed in the vehicle?
In most devices it fits in 15-30 minutes with a 10 mm wrench; if the battery is under the seat or in the boot the time can double. See the step-by-step guide on this page. Quick summary: 1) switch off the engine and remove the key; 2) locate the original battery (engine bay, boot or under seat); 3) disconnect the negative (−) terminal first, then the positive (+); 4) loosen the hold-down clamp and remove the old battery; 5) fit the new one in the same orientation — match the polarity shown on the product sheet; 6) connect the positive (+) first, then the negative (−). On devices with Start-Stop or BMS, register the battery via OBD so the alternator applies the correct charging profile.
How long does the MK Powered ES3-12R battery last?
Expected lifespan of the MK Powered ES3-12R is 5 to 8 years in mild-climate device use with Start-Stop. In cold regions it drops slightly due to cold-start stress; in very hot regions it also drops because of electrolyte evaporation. To extend its life: avoid deep discharges (headlights on with engine off), have the alternator checked yearly, and keep the battery clean and properly secured.
What are the measurements of the ES3-12R model?
Dimensions (length × width × height) are 133×33×104 mm — also written as 133x33x104 mm — following the European DIN standard. Always measure the space in your device before buying: even one extra millimetre can prevent the hold-down clamp from closing. The height shown includes the terminals.
Which batteries are equivalent to the MK Powered ES3-12R?
Directly interchangeable batteries (same dimensions, same polarity, same Ah and CCA) are the OEM equivalents from leading brands: Bosch, Tudor, Exide and, depending on the model, Banner or Yuasa. Exact equivalence depends on technology — an EFB cannot be replaced with a conventional battery in Start-Stop devices. See the "Equivalents" section to view recommended options at the same performance level.
The top-rated online battery store in Spain
-
Audited by Trustpilot, no filters, no edits. The top-rated battery store in Spain.
Trustpilot · verified, no filters
-
Official Varta distributor
Official Varta wholesale distributor. 100% genuine batteries, recently manufactured, best price and no middlemen.
World’s best-selling battery brand
-
+100,000 satisfied customers
More than 100,000 customers already trust baterias.com — and recommend us to their friends and family.
They trust us and recommend us
Choose trust, choose quality, choose baterias.com.