Mk powered ES7-6 · Wheelchair battery 6V 7Ah AGM
Specifications
| Brand | MK POWERED |
|---|---|
| Part number | ES7-6 |
| Voltage (V) | 6 |
| Capacity (C20) | 7Ah (c20) |
| Capacity (C5) | 5.95Ah (c5) |
| Technology | AGM |
| Length | 150.90 mm |
| Width | 34.00 mm |
| Height | 100.10 mm |
€31.90
VAT included
4,78/5★★★★★27 reviewsVerified purchases
- ★★★★★Jose Manuel Soler:
Gracias por asesorarme en la instalación de la batería
- ★★★★★Ruben Rubio:
Uff te saca de un buen apuro, tu pedido llega en menos de 24 horas comprobado
- ★★★★Mario Perez:
Supe cual batería necesitaba mi coche gracias a su asesoría
MK Powered ES7-6 6V 7Ah is a sealed AGM/GEL battery for daily mobility use: maintenance-free, no risk of spills, and thousands of useful cycles well beyond a starter battery.
Why this wheelchair battery?
- Daily cycling without wearhandles deep discharges without losing capacity
- Sealed AGM/GELno maintenance, no risk of spills
- Thousands of useful cyclesover its full lifetime
Voltage
6 V
Capacity
7 Ah
Dimensions
150×34×100 mm
Technology
AGM
Weight
1,2 kg
Model
MK AGM
Mobility battery MK Powered ES7-6 Mk AGM 7Ah 6V
6VVoltage
7AhCapacity
1.20kgWeight
Designed for power wheelchairs, mobility scooters and light electric vehicles, the MK Powered ES7-6 from the Mk AGM range offers 7 Ah of deep-cycle capacity with AGM technology. It replaces the original battery without adaptation in power wheelchairs and mobility scooters with a 150 × 34 × 100 mm format: same 7 Ah capacity.
- Thousands of useful cycles over its lifetime.
- Standard replacement format for wheelchairs and scooters.
- AGM technology: absorbed electrolyte, no spills, can be mounted at an angle.
- Designed to be discharged and recharged daily without losing capacity.
What the MK Powered ES7-6 is for
With 7 Ah, the MK Powered ES7-6 offers the daily range that power wheelchairs, mobility scooters and light electric vehicles need, with a sealed construction that is safe indoors. Check that it matches your current battery in dimensions, terminals and hold-down: this reference has a weight of 1.20 kg and F1 terminals.
The MK Powered ES7-6: Mk AGM range and AGM technology
The ES7-6 is part of the MK Powered Mk AGM range. Choosing the right reference within the series comes down to capacity, dimensions and terminals: technology and quality are common to the whole family.
AGM means the acid is held in a glass mat instead of floating free. That is why the battery can be installed in the cabin without gases, survives more cycles and recovers its charge quickly.
Will it fit your current battery tray?
In terms of format, the MK Powered ES7-6 measures 150 × 34 × 100 mm (length × width × height) and weighs 1.20 kg. It uses F1 terminals, the system that anchors and connects it in the vehicle. Checking the three dimensions and the terminal position before buying avoids the most common mistake when replacing a battery.
What MK Powered does differently
MK Battery (MK Powered) is the US specialist in AGM and GEL batteries for mobility: power wheelchairs, scooters and medical equipment rely on its batteries for safety and cycle life. All the MK Powered batteries in our catalogue are genuine product, recently manufactured and covered by the manufacturer's warranty.
Usage and maintenance tips
Recharge the wheelchair or scooter after each use and do not leave it discharged for days: lead sulphates and loses capacity. Charge with a charger that has an AGM mode: it limits the voltage and protects the glass-fibre separators.
Official warranty
The MK Powered ES7-6 comes with the manufacturer's official warranty against manufacturing defects. If it fails through a defect within the warranty period, we replace it at no cost to you.
Delivery times and returns
Same-day dispatch from our warehouse for in-stock orders placed before 6:00 pm: 24-48 working hours in mainland Spain and Portugal, 3 to 5 days in the islands and the rest of Europe. Returns are accepted for 14 days if the battery has not been used (free collection on the Iberian mainland). You will receive tracking by email.
BCOM-MK-ES7-6
Data sheet
- Brand
- MK
- Reference
- ES7-6
- Model
- MK AGM
- Voltage (V)
- 6
- Length
- 150.90 mm
- Width
- 34.00 mm
- Height
- 100.10 mm
- Weight
- 1.2 Kgs
- Technology
- AGM
- Terminal type
- F1
- Capacity (C20)
- 7Ah (c20)
- Capacity (C5)
- 5.95Ah (c5)
Specific References
- UPC
- 083996172531
- MPN
- ES7-6
4,78/5
Verified purchasesLatest verified reviews
★★★★★Jose Manuel Soler
09/06/2026Excelente asesoramiento
Gracias por asesorarme en la instalación de la batería
★★★★★Ruben Rubio
10/02/2026Entrega eficaz
Uff te saca de un buen apuro, tu pedido llega en menos de 24 horas comprobado
★★★★★Mario Perez
27/01/2026Buenos precios
Supe cual batería necesitaba mi coche gracias a su asesoría
★★★★★Andres Dominguez
21/01/2026Gracias
Tenía dudas de que batería elegir y me indicarón la mejor opción además se ofrecieron a asesorarme con la instalación. Increíble y super recomendada
★★★★★Gonzalo Herrero
30/09/2025Me ayudaron en la elección de mi batería
Gracias por asesorarme en la instalación de la bateria
Recommended accessories
How to change the battery
Guide to replace a cyclic battery (12V 4-30Ah) for UPS, mobility scooter, alarm or backup device. Estimated time 10-15 minutes. Important: discharge residual voltage before handling.
Step 1. Power off and unplug the device
Unplug the device (UPS, scooter, alarm) and leave it off for at least 30 seconds to discharge residual capacitor voltage. Work on an insulating surface.
Step 2. Locate the battery compartment
Usually under the seat (mobility scooter/wheelchair), in the rear module of the UPS, or behind a side panel with screws. Check the device manual for unusual models.
Step 3. Disconnect the negative (−) first
With insulated gloves, remove the negative (−) cable first. Some UPS have protection fuses — note their position before removing.
Step 4. Disconnect the positive (+) terminal
Repeat with the positive cable (red, marked +). Important: never let a terminal touch metal of the car while the other is still connected.
Step 5. Remove the old battery
Typical weight 1-15 kg depending on capacity. Many cyclic batteries are AGM/GEL — keep them upright. Do NOT invert the battery: even sealed, residue may exist.
Step 6. Fit the new battery
Same orientation and type (AGM, GEL or flooded). Polarity must match the device, not a chassis (this is not a car). Make sure terminals do not touch metal parts of the compartment.
Step 7. Connect the positive (+) first
On cyclic devices the order is reversed compared to cars: positive (+) first, negative (−) afterwards. Tighten without forcing — the plastic terminal housing of cyclic batteries damages easily.
Step 8. Initial charge before first use
Cyclic batteries ship at 60-80%. Before first use, connect the device charger for 8-12 hours (or use an AGM/GEL smart charger if available). This avoids short cycles and extends lifespan.
Frequently asked questions
Is the MK Powered ES7-6 an AGM battery and what are the benefits of AGM?
Yes. The ES7-6 from MK Powered uses AGM (Absorbent Glass Mat) technology: a sealed lead-acid battery where the electrolyte is absorbed in a glass-fibre mat. It withstands more charge/discharge cycles than a conventional one, handles heat better and is the required technology for devices with advanced Start-Stop and regenerative braking. Expected lifespan: 5-8 years under normal conditions.
How do I fit the ES7-6 model in my device?
In most devices it fits in 15-30 minutes with a 10 mm wrench; if the battery is under the seat or in the boot the time can double. See the step-by-step guide on this page. Quick summary: 1) switch off the engine and remove the key; 2) locate the original battery (engine bay, boot or under seat); 3) disconnect the negative (−) terminal first, then the positive (+); 4) loosen the hold-down clamp and remove the old battery; 5) fit the new one in the same orientation — match the polarity shown on the product sheet; 6) connect the positive (+) first, then the negative (−). On devices with Start-Stop or BMS, register the battery via OBD so the alternator applies the correct charging profile.
What is the service life of the ES7-6 model?
Expected lifespan of the MK Powered ES7-6 is 5 to 8 years in mild-climate device use with Start-Stop. In cold regions it drops slightly due to cold-start stress; in very hot regions it also drops because of electrolyte evaporation. To extend its life: avoid deep discharges (headlights on with engine off), have the alternator checked yearly, and keep the battery clean and properly secured.
What are the measurements of the ES7-6 model?
Dimensions (length × width × height) are 151×34×100 mm — also written as 151x34x100 mm — following the European DIN standard. Always measure the space in your device before buying: even one extra millimetre can prevent the hold-down clamp from closing. The height shown includes the terminals.
Which batteries are equivalent to the MK Powered ES7-6?
Directly interchangeable batteries (same dimensions, same polarity, same Ah and CCA) are the OEM equivalents from leading brands: Bosch, Tudor, Exide and, depending on the model, Banner or Yuasa. Exact equivalence depends on technology — an EFB cannot be replaced with a conventional battery in Start-Stop devices. See the "Equivalents" section to view recommended options at the same performance level.
The top-rated online battery store in Spain
-
Audited by Trustpilot, no filters, no edits. The top-rated battery store in Spain.
Trustpilot · verified, no filters
-
Official Varta distributor
Official Varta wholesale distributor. 100% genuine batteries, recently manufactured, best price and no middlemen.
World’s best-selling battery brand
-
+100,000 satisfied customers
More than 100,000 customers already trust baterias.com — and recommend us to their friends and family.
They trust us and recommend us
Choose trust, choose quality, choose baterias.com.