Motobatt MTX7D · Motorcycle battery 12V 7Ah 105A GEL

Battery MOTOBATT MTX7D 12V 7Ah 105A GEL
search
  • Battery MOTOBATT MTX7D 12V 7Ah 105A GEL
  • Battery MOTOBATT MTX7D 12V 7Ah 105A GEL
  • Battery MOTOBATT MTX7D 12V 7Ah 105A GEL

Specifications

BrandMOTOBATT
Part numberMTX7D
Voltage (V)12
Capacity (C20)7
Capacity (C10)7Ah (c10)
TechnologyGEL
Length149.00 mm
Width60.00 mm
Height129.00 mm
See the full specifications →

This product is priced on demand to offer you the best available price at all times.

Please contact us to request a quote and we will inform you about availability and the best price on the entire website, as well as the delivery time.

Thank you

4,75· 42 reseñas
4,75/5★★★★★42 reviewsVerified purchases
  • ★★★★★Marc Blanco: Excelente atención telefònico, recomiendo llamar a su número antes de comprar en otra web
  • ★★★★★Ismael Martin: Recomiendo esta web, excelente servicio
  • ★★★★★Mariano Roman: Resolvieron todas mis dudas
See all 42 reviews

Motobatt MTX7D 12V 7Ah 105A is a motorcycle starter battery with standard JIS code (the one on your bike's original label). Ready to use, sealed and vibration-resistant. Fits any model that takes the same JIS reference — the code your mechanic recognises at a glance.

Why this motorcycle battery?

  • Same JIS referenceas your bike's original — fits first time
  • Sealed and ready to useno acid handling, no refills
  • Survives winter storageholds charge through long off-season
Voltage
12 V
Capacity
7 Ah C10
Cold cranking
105 A EN-1
Dimensions
149×60×129 mm
Technology
GEL
Weight
2,55 kg
Model
MOTOBATT SUPER GEL
Mfr. reference
MTX7D
Free quote, no obligation

Request a quote for your Motorcycle battery Motobatt MTX7D 12V 7Ah 105A GEL

  • Reply in under 24 working hours
  • Best price guaranteed
Attach photo (optional)
Photo of the old battery or vehicle documentation · Max. 3 · 8 MB · images or PDF
Logo Motobatt

Motorcycle battery Motobatt MTX7D Super GEL 7Ah 105A 12V

12VVoltage
7AhCapacity
105ACold cranking
2.55kgWeight

The Motobatt MTX7D motorcycle battery is rated at 12 V, 7 Ah and 105 A of cold cranking current (EN) from the Super GEL range, and is designed for motorcycles, scooters, quads and personal watercraft. It replaces the original battery without adaptation in motorcycles with a 149 × 60 × 129 mm format: same 7 Ah capacity.

  • GEL technology: gelled electrolyte, fully sealed and maintenance-free.
  • Same JIS code as the original battery: fits first time.
  • Resistant to the vibration typical of two wheels.
  • Energetic cranking for high-compression engines.

What the Motobatt MTX7D is for

Designed for motorcycles, scooters, quads and personal watercraft, the Motobatt MTX7D replaces the original battery of bikes that use this code or format. Check the position of the positive terminal before ordering. Check that it matches your current battery in dimensions, terminals and hold-down: this reference has a weight of 2.55 kg.

The Motobatt MTX7D: Super GEL range and GEL technology

The Super GEL is the Motobatt range the MTX7D belongs to: it shares the same construction and quality criteria with the rest of the series, and varies in capacity and format to suit each vehicle.

A GEL battery is the choice when cycle resistance and safety matter most: no gases, no liquid and thousands of partial discharges in its lifetime.

Size, terminals and hold-down of the Motobatt MTX7D

In terms of format, the Motobatt MTX7D measures 149 × 60 × 129 mm (length × width × height) and weighs 2.55 kg. For a direct replacement, the current battery tray must accept these dimensions and the same terminal layout; otherwise adapters will be needed or the hold-down will change.

What Motobatt does differently

Motobatt is the motorcycle battery specialist with Quadflex technology: four terminals that let you connect the battery in any position and a sealed AGM construction ready to fit. All the Motobatt batteries in our catalogue are genuine product, recently manufactured and covered by the manufacturer's warranty.

Usage and maintenance tips

Check the resting voltage before the season (above 12.6 V on a charged battery) and make sure the terminals are clean and tight. If the bike spends the winter standing, connect a trickle charger: deep discharge through inactivity is the first cause of premature failure.

Manufacturer's warranty

The Motobatt MTX7D comes with the manufacturer's official warranty. The warranty does not cover discharge through prolonged inactivity: if the bike stands for months, use a trickle charger.

Delivery times and returns

Orders placed before 6:00 pm with the battery in stock ship the same day. Delivery in mainland Spain and Portugal takes 24-48 working hours; for the Balearic and Canary Islands and the rest of the European Union allow 3 to 5 working days. You have 14 days to return an unused battery; in mainland Spain and Portugal collection is free. We email you the tracking number as soon as the parcel ships.

BCOM-MOTOBATT-MTX7D

Data sheet

Brand
MOTOBATT
Reference
MTX7D
Model
MOTOBATT SUPER GEL
Voltage (V)
12
Length
149.00 mm
Width
60.00 mm
Height
129.00 mm
Weight
2.55 Kgs
Technology
GEL
Cold cranking amps (EN)
105A
Capacity (C20)
7
Capacity (C10)
7Ah (c10)

Specific References

MPN
MTX7D
4,75/5
★★★★★42 reviews
Verified purchases
Latest verified reviews
★★★★★Marc Blanco
20/06/2026
Buena atención telefónica

Excelente atención telefònico, recomiendo llamar a su número antes de comprar en otra web

★★★★★Ismael Martin
12/02/2026
Gracias

Recomiendo esta web, excelente servicio

★★★★★Mariano Roman
10/02/2026
Buena atención

Resolvieron todas mis dudas

★★★★★Juan Francisco PeÑa
22/01/2026
Se preocupan por el cliente

Recomiendo la web por su trato al momento de elegir

Recommended accessories — complement the Motobatt MTX7D with a charger or tester

How to change the battery

Guide to replace your motorcycle battery in 10-15 minutes. Motorcycle batteries are light (2-5 kg) and usually need an 8 mm wrench.

⏱ 10-15 min🛠 Tools: 8 mm wrench (some bikes use 10 mm) · Protective gloves
  1. Step 1. Prepare the vehicle

    Park on a flat surface, switch off the engine and remove the key. Make sure all lights and electrical accessories are off. Wait 1-2 minutes before starting.

  2. Step 2. Locate the battery compartment

    On motorcycles it is usually under the seat, in the rear cowl or behind a side panel. Check the manual — access varies a lot between models.

  3. Step 3. Disconnect the negative (−) terminal

    Use the 10 mm wrench to loosen the negative cable nut (black, marked −) and remove the cable from the post. Move it aside so it cannot touch any bodywork.

  4. Step 4. Disconnect the positive (+) terminal

    Repeat with the positive cable (red, marked +). Important: never let a terminal touch metal of the car while the other is still connected.

  5. Step 5. Remove the old battery

    Loosen the hold-down clamp or the straps that secure it. Lift the battery carefully — typical weight 2-5 kg. Check the terminals are not corroded before fitting the new one.

  6. Step 6. Install the new battery

    Place the battery in the same orientation as the old one (positive terminal on the same side). Tighten the hold-down clamp firmly.

  7. Step 7. Connect the cables

    Connect the positive (+) terminal first, then the negative (−). Tighten the nuts with the wrench until each terminal does not move. Apply anti-spark grease if you have any.

  8. Step 8. Verify the engine starts

    Close the bonnet. Start the engine to confirm everything works. On cars with Start-Stop or a BMS, you may need to register the battery via OBD so the alternator applies the correct charging profile.

Frequently asked questions

Is the Motobatt MTX7D a GEL battery? What is GEL used for?

Yes, this model is a GEL battery: sealed lead-acid where the electrolyte is in gel form. It tolerates deep discharges very well and is ideal for cyclic use (solar, motorhomes, electric wheelchairs, motorcycles). Requires a GEL-specific smart charger — max charge voltage ~14.1 V (vs 14.4-14.7 V for AGM). Lifespan 6-10 years.

How is the Motobatt MTX7D battery installed in the vehicle?

In most motorcycles it fits in 15-30 minutes with a 10 mm wrench; if the battery is under the seat or in the boot the time can double. See the step-by-step guide on this page. Quick summary: 1) switch off the engine and remove the key; 2) locate the original battery (engine bay, boot or under seat); 3) disconnect the negative (−) terminal first, then the positive (+); 4) loosen the hold-down clamp and remove the old battery; 5) fit the new one in the same orientation — match the polarity shown on the product sheet; 6) connect the positive (+) first, then the negative (−). On motorcycles with Start-Stop or BMS, register the battery via OBD so the alternator applies the correct charging profile.

What is the service life of the MTX7D model?

Expected lifespan of the Motobatt MTX7D is 6 to 10 years in cyclic use (marine, caravan, solar) with controlled discharges. In cold regions it drops slightly due to cold-start stress; in very hot regions it also drops because of electrolyte evaporation. To extend its life: avoid deep discharges (headlights on with engine off), have the alternator checked yearly, and keep the battery clean and properly secured.

What are the dimensions of the Motobatt MTX7D battery?

Dimensions (length × width × height) are 149×60×129 mm — also written as 149x60x129 mm — following the European DIN standard. Always measure the space in your motorcycle before buying: even one extra millimetre can prevent the hold-down clamp from closing. The height shown includes the terminals.

Does this battery fit my motorcycle?

Three options to confirm: 1) enter your number plate in the finder (DGT/DVLA/KBA auto-detect your model and engine); 2) check the "Compatible vehicles" tab on this page, where we list every vehicle verified by our technical team; 3) if you cannot find your model, message us on WhatsApp with brand, model, engine and year — we reply during business hours (Mon–Fri 10:00–13:30 and 16:40–18:00 (Spanish time, CET)). The MTX7D typically fits a wide range of European vehicles thanks to its standard DIN case format.

Which batteries are equivalent to the Motobatt MTX7D?

Directly interchangeable batteries (same dimensions, same polarity, same Ah and CCA) are the OEM equivalents from leading brands: Bosch, Tudor, Exide and, depending on the model, Banner or Yuasa. Exact equivalence depends on technology — an EFB cannot be replaced with a conventional battery in Start-Stop motorcycles. See the "Equivalents" section to view recommended options at the same performance level.


The top-rated online battery store in Spain

  • 4.5/5 · +11,700 reviews

    Audited by Trustpilot, no filters, no edits. The top-rated battery store in Spain.

    Trustpilot · verified, no filters

  • Official Varta distributor

    Official Varta wholesale distributor. 100% genuine batteries, recently manufactured, best price and no middlemen.

    World’s best-selling battery brand

  • +100,000 satisfied customers

    More than 100,000 customers already trust baterias.com — and recommend us to their friends and family.

    They trust us and recommend us

Choose trust, choose quality, choose baterias.com.