Q-battery 12SEM-180 · Caravan battery 12V 180Ah
Specifications
| Brand | Q-battery |
|---|---|
| Part number | 12SEM-180 |
| Voltage (V) | 12 |
| Capacity (C20) | 180Ah (c20) |
| Technology | Lead-acid |
| Length | 513.00 cm |
| Width | 224.00 cm |
| Height | 225.00 cm |
| Weight | 48.60 Kgs |
€456.90
VAT included
Q-battery 12SEM-180 12V 180Ah is a leisure battery for campers, motorhomes and caravans. Designed to power the entire interior kit (fridge, heater, water pump, USB, LED lighting) for several days off-grid, with no need to plug into a campsite hookup.
Why this caravan battery?
- Real off-grid autonomyno campsite hookup needed
- Lasts the whole seasonhandles daily discharges without capacity loss
- Powers it all at oncefridge, water pump, LED and USB without issues
Voltage
12 V
Capacity
180 Ah
Dimensions
513×224×225 mm
Technology
Lead-acid
Polarity
Positive on the left
Weight
48,6 kg
Model
SEMITRACTION BATTERY
Mobility battery Q-Battery 12SEM-180 Semitraction Battery 180Ah 12V
12VVoltage
180AhCapacity
48.60kgWeight
The Q-Battery 12SEM-180 with conventional lead-acid technology delivers 180 Ah at 12 V with the cycle life that power wheelchairs, mobility scooters and light electric vehicles demand. Measuring 513 × 224 × 225 mm and the positive terminal on the left, it is the direct replacement for power wheelchairs and mobility scooters fitted from the factory with a 180 Ah battery of this format.
- Good balance of capacity, cranking power and price.
- Sealed AGM/GEL: safe indoors and in transport.
- No maintenance, no water top-ups.
- Approved for air and sea transport (VRLA).
What the Q-Battery 12SEM-180 is for
The Q-Battery 12SEM-180 is designed for power wheelchairs, mobility scooters and light electric vehicles. Wheelchairs and scooters normally use two identical batteries in series: replace them together. Check that it matches your current battery in dimensions, terminals and hold-down: this reference has a weight of 48.60 kg, A-Pole terminals and B0 hold-down.
The Q-Battery 12SEM-180: Semitraction Battery range and conventional lead-acid technology
The Semitraction Battery is the Q-Battery range the 12SEM-180 belongs to: it shares the same construction and quality criteria with the rest of the series, and varies in capacity and format to suit each vehicle.
In a conventional battery the electrolyte is liquid and the lead plates are immersed in it. It is a mature, economical and easily recycled technology, ideal for starting vehicles in normal use.
Size, terminals and hold-down of the Q-Battery 12SEM-180
It has external dimensions of 513 × 224 × 225 mm and weighs 48.60 kg. The positive terminal on the left decides which side the cables end up on: it is the detail that causes most buying mistakes, so check it before ordering. It uses a B0 hold-down and A-Pole terminals, the system that anchors and connects it in the vehicle. Before replacing it, measure your current battery tray: if all three dimensions and the terminal positions match, the swap is direct and needs no adapters.
Q-Battery: the maker behind the 12SEM-180
The Q-Battery catalogue runs from small alarm batteries to large traction monoblocs, always with sealed, maintenance-free technology. All the Q-Battery batteries in our catalogue are genuine product, recently manufactured and covered by the manufacturer's warranty.
Care and maintenance
On batteries with filler caps, check the electrolyte level and top up only with distilled water. Recharge the wheelchair or scooter after each use and do not leave it discharged for days: lead sulphates and loses capacity.
Official warranty
The Q-Battery 12SEM-180 comes with the manufacturer's official warranty against manufacturing defects. If it fails through a defect within the warranty period, we replace it at no cost to you.
Shipping, delivery and returns
Orders placed before 6:00 pm with the battery in stock ship the same day. Delivery in mainland Spain and Portugal takes 24-48 working hours; for the Balearic and Canary Islands and the rest of the European Union allow 3 to 5 working days. You have 14 days to return an unused battery; in mainland Spain and Portugal collection is free. We email you the tracking number as soon as the parcel ships.
BCOM-Q-BATTERY-12SEM-180
Data sheet
- Brand
- Q-Battery
- Reference
- 12SEM-180
- Model
- SEMITRACTION BATTERY
- Voltage (V)
- 12
- Length
- 513.00 cm
- Width
- 224.00 cm
- Height
- 225.00 cm
- Weight
- 48.60 Kgs
- Technology
- Lead-acid
- Terminal layout
- Positive terminal on the left
- Terminal type
- A-Pole
- Hold-down
- B0
- Capacity (C20)
- 180Ah (c20)
Specific References
- EAN13
- 4250889600242
- MPN
- 12SEM-180
Codes and references Q-battery 12SEM-180
| Brand | Q-battery |
|---|---|
| Manufacturer range | SEMITRACTION BATTERY |
| Manufacturer reference (MPN) | 12SEM-180 |
| EAN-13 barcode | 4250889600242 |
| Dimensions (length × width × height) | 513 × 224 × 225 mm (513x224x225) |
Comparison: Q-battery BATTERY-12SEM-180 vs equivalents
The Q-battery BATTERY-12SEM-180 is interchangeable with these equivalent references: M12 (Varta).
| Product | Specifications | Technology | Price |
|---|---|---|---|
Q-battery
BATTERY-12SEM-180
This battery
|
12V 180Ah | Lead-acid | €456.90 |
Varta
M12
|
12V 180Ah 1400A | Lead-acid | €179.40 |
Equivalences verified by our technical team: same dimensions, polarity, capacity and CCA. Official manufacturer warranty on every option.
Recommended accessories
How to change the battery
Guide to replace a cyclic battery (12V 4-30Ah) for UPS, mobility scooter, alarm or backup device. Estimated time 10-15 minutes. Important: discharge residual voltage before handling.
Step 1. Power off and unplug the device
Unplug the device (UPS, scooter, alarm) and leave it off for at least 30 seconds to discharge residual capacitor voltage. Work on an insulating surface.
Step 2. Locate the battery compartment
Usually under the seat (mobility scooter/wheelchair), in the rear module of the UPS, or behind a side panel with screws. Check the device manual for unusual models.
Step 3. Disconnect the negative (−) first
With insulated gloves, remove the negative (−) cable first. Some UPS have protection fuses — note their position before removing.
Step 4. Disconnect the positive (+) terminal
Repeat with the positive cable (red, marked +). Important: never let a terminal touch metal of the car while the other is still connected.
Step 5. Remove the old battery
Typical weight 1-15 kg depending on capacity. Many cyclic batteries are AGM/GEL — keep them upright. Do NOT invert the battery: even sealed, residue may exist.
Step 6. Fit the new battery
Same orientation and type (AGM, GEL or flooded). Polarity must match the device, not a chassis (this is not a car). Make sure terminals do not touch metal parts of the compartment.
Step 7. Connect the positive (+) first
On cyclic devices the order is reversed compared to cars: positive (+) first, negative (−) afterwards. Tighten without forcing — the plastic terminal housing of cyclic batteries damages easily.
Step 8. Initial charge before first use
Cyclic batteries ship at 60-80%. Before first use, connect the device charger for 8-12 hours (or use an AGM/GEL smart charger if available). This avoids short cycles and extends lifespan.
Frequently asked questions
How is the Q-battery 12SEM-180 battery installed in the vehicle?
In most devices it fits in 15-30 minutes with a 10 mm wrench; if the battery is under the seat or in the boot the time can double. See the step-by-step guide on this page. Quick summary: 1) switch off the engine and remove the key; 2) locate the original battery (engine bay, boot or under seat); 3) disconnect the negative (−) terminal first, then the positive (+); 4) loosen the hold-down clamp and remove the old battery; 5) fit the new one in the same orientation — match the polarity shown on the product sheet; 6) connect the positive (+) first, then the negative (−). On devices with Start-Stop or BMS, register the battery via OBD so the alternator applies the correct charging profile.
How long does the Q-battery 12SEM-180 battery last?
Expected lifespan of the Q-battery 12SEM-180 is 4 to 6 years in regular device use without Start-Stop. In cold regions it drops slightly due to cold-start stress; in very hot regions it also drops because of electrolyte evaporation. To extend its life: avoid deep discharges (headlights on with engine off), have the alternator checked yearly, and keep the battery clean and properly secured.
What are the dimensions of the Q-battery 12SEM-180 battery?
Dimensions (length × width × height) are 513×224×225 mm — also written as 513x224x225 mm — following the European DIN standard. Always measure the space in your device before buying: even one extra millimetre can prevent the hold-down clamp from closing. The height shown includes the terminals.
Which batteries are equivalent to the Q-battery 12SEM-180?
Directly interchangeable batteries (same dimensions, same polarity, same Ah and CCA) are the OEM equivalents from leading brands: Bosch, Tudor, Exide and, depending on the model, Banner or Yuasa. Exact equivalence depends on technology — an EFB cannot be replaced with a conventional battery in Start-Stop devices. See the "Equivalents" section to view recommended options at the same performance level.
The top-rated online battery store in Spain
-
Audited by Trustpilot, no filters, no edits. The top-rated battery store in Spain.
Trustpilot · verified, no filters
-
Official Varta distributor
Official Varta wholesale distributor. 100% genuine batteries, recently manufactured, best price and no middlemen.
World’s best-selling battery brand
-
+100,000 satisfied customers
More than 100,000 customers already trust baterias.com — and recommend us to their friends and family.
They trust us and recommend us
Choose trust, choose quality, choose baterias.com.