Deka GC10DT · Wheelchair battery 6V 215Ah
Specifications
| Brand | DEKA |
|---|---|
| Part number | GC10DT |
| Voltage (V) | 6 |
| Capacity (C20) | 215Ah (c20) |
| Technology | Lead-acid |
| Length | 260.40 mm |
| Width | 181.10 mm |
| Height | 276.40 mm |
| Weight | 27.44 Kgs |
This product is priced on demand to offer you the best available price at all times.
Please contact us to request a quote and we will inform you about availability and the best price on the entire website, as well as the delivery time.
Thank you
4,79/5★★★★★49 reviewsVerified purchases
- ★★★★★Miguel Romero:
Hice el pedido de la batería un martes a las 6 y me llegó el miércoles a las 1
- ★★★★★Alvaro Prieto:
Precios buenos y un gran servicio. 100% recomendado
- ★★★★★Rodrigo Garcia:
Buena experiencia comprando en esta web. Mi DEKA GC10DT me llego al día siguiente de pedirla. Todo ok
Deka GC10DT 6V 215Ah is a sealed AGM/GEL battery for daily mobility use: maintenance-free, no risk of spills, and thousands of useful cycles well beyond a starter battery.
Why this wheelchair battery?
- Daily cycling without wearhandles deep discharges without losing capacity
- Sealed AGM/GELno maintenance, no risk of spills
- Thousands of useful cyclesover its full lifetime
Voltage
6 V
Capacity
215 Ah
Dimensions
260×181×276 mm
Technology
Lead-acid
Weight
27,44 kg
Model
DEKA PLOMO/ACIDO
Free quote, no obligation
Request a quote for your Wheelchair battery Deka GC10DT 6V 215Ah
- Reply in under 24 working hours
- Best price guaranteed
Mobility battery Deka GC10DT 215Ah 6V
6VVoltage
215AhCapacity
27.44kgWeight
The 6 V, 215 Ah Deka GC10DT with conventional lead-acid technology is the standard replacement for power wheelchairs, mobility scooters and light electric vehicles. It measures 260 × 181 × 276 mm, the format sought by anyone replacing a 215 Ah battery in power wheelchairs and mobility scooters.
- Designed to be discharged and recharged daily without losing capacity.
- Conventional lead-acid: the most proven and economical technology.
- Standard replacement format for wheelchairs and scooters.
- Thousands of useful cycles over its lifetime.
What the Deka GC10DT is for
The Deka GC10DT is designed for power wheelchairs, mobility scooters and light electric vehicles. Wheelchairs and scooters normally use two identical batteries in series: replace them together. Check that it matches your current battery in dimensions, terminals and hold-down: this reference has a weight of 27.44 kg.
Technology inside the Deka GC10DT
Within the Deka catalogue, the GC10DT is the 215 Ah model designed for this application.
The conventional lead-acid battery remains the most widespread technology thanks to its balance of capacity, cranking current and price. Well maintained and kept charged, it offers years of reliable service in vehicles without Start-Stop.
Size, terminals and hold-down of the Deka GC10DT
In terms of format, the Deka GC10DT measures 260 × 181 × 276 mm (length × width × height) and weighs 27.44 kg. Before replacing it, measure your current battery tray: if all three dimensions and the terminal positions match, the swap is direct and needs no adapters.
What Deka does differently
Deka (East Penn Manufacturing) is the largest single-site lead battery manufacturer in the United States, with full control of the process from lead recycling to the finished battery. At baterias.com we work directly with the manufacturer or its official distributor: real stock, brand-new product and official warranty.
How to make it last longer
Recharge the wheelchair or scooter after each use and do not leave it discharged for days: lead sulphates and loses capacity. On batteries with filler caps, check the electrolyte level and top up only with distilled water.
Warranty and coverage
The Deka GC10DT comes with the manufacturer's official warranty against manufacturing defects. If it fails through a defect within the warranty period, we replace it at no cost to you.
Delivery times and returns
Same-day dispatch from our warehouse for in-stock orders placed before 6:00 pm: 24-48 working hours in mainland Spain and Portugal, 3 to 5 days in the islands and the rest of Europe. Returns are accepted for 14 days if the battery has not been used (free collection on the Iberian mainland). You will receive tracking by email.
BCOM-DEKA-GC10DT
Data sheet
- Brand
- DEKA
- Reference
- GC10DT
- Model
- DEKA Lead-acid
- Voltage (V)
- 6
- Length
- 260.40 mm
- Width
- 181.10 mm
- Height
- 276.40 mm
- Weight
- 27.44 Kgs
- Technology
- Lead-acid
- Capacity (C20)
- 215Ah (c20)
Specific References
- MPN
- GC10DT
4,79/5
Verified purchasesLatest verified reviews
★★★★★Miguel Romero
11/07/2026Entrega al día siguiente
Hice el pedido de la batería un martes a las 6 y me llegó el miércoles a las 1
★★★★★Alvaro Prieto
08/02/2026Servicio sobresaliente
Precios buenos y un gran servicio. 100% recomendado
★★★★★Rodrigo Garcia
23/01/2026Buenos precios. Recomendable
Buena experiencia comprando en esta web. Mi DEKA GC10DT me llego al día siguiente de pedirla. Todo ok
★★★★★Sebastian Ramos
06/01/20265 estrellas, Gracias
Ya me había quedado con esta web por la variedad de sus productos, pero es que he llamado para unas dudas que tenía y me han atendido de maravilla.
★★★★★Adrian Carmona
16/11/2025Entrega muy rápida
Hice el pedido de la bateria un martes a las 6 y me llegó el miércoles a las 2
Recommended accessories
How to change the battery
Guide to replace a cyclic battery (12V 4-30Ah) for UPS, mobility scooter, alarm or backup device. Estimated time 10-15 minutes. Important: discharge residual voltage before handling.
Step 1. Power off and unplug the device
Unplug the device (UPS, scooter, alarm) and leave it off for at least 30 seconds to discharge residual capacitor voltage. Work on an insulating surface.
Step 2. Locate the battery compartment
Usually under the seat (mobility scooter/wheelchair), in the rear module of the UPS, or behind a side panel with screws. Check the device manual for unusual models.
Step 3. Disconnect the negative (−) first
With insulated gloves, remove the negative (−) cable first. Some UPS have protection fuses — note their position before removing.
Step 4. Disconnect the positive (+) terminal
Repeat with the positive cable (red, marked +). Important: never let a terminal touch metal of the car while the other is still connected.
Step 5. Remove the old battery
Typical weight 1-15 kg depending on capacity. Many cyclic batteries are AGM/GEL — keep them upright. Do NOT invert the battery: even sealed, residue may exist.
Step 6. Fit the new battery
Same orientation and type (AGM, GEL or flooded). Polarity must match the device, not a chassis (this is not a car). Make sure terminals do not touch metal parts of the compartment.
Step 7. Connect the positive (+) first
On cyclic devices the order is reversed compared to cars: positive (+) first, negative (−) afterwards. Tighten without forcing — the plastic terminal housing of cyclic batteries damages easily.
Step 8. Initial charge before first use
Cyclic batteries ship at 60-80%. Before first use, connect the device charger for 8-12 hours (or use an AGM/GEL smart charger if available). This avoids short cycles and extends lifespan.
Frequently asked questions
How do I fit the GC10DT model in my device?
In most devices it fits in 15-30 minutes with a 10 mm wrench; if the battery is under the seat or in the boot the time can double. See the step-by-step guide on this page. Quick summary: 1) switch off the engine and remove the key; 2) locate the original battery (engine bay, boot or under seat); 3) disconnect the negative (−) terminal first, then the positive (+); 4) loosen the hold-down clamp and remove the old battery; 5) fit the new one in the same orientation — match the polarity shown on the product sheet; 6) connect the positive (+) first, then the negative (−). On devices with Start-Stop or BMS, register the battery via OBD so the alternator applies the correct charging profile.
How many years does this battery last?
Expected lifespan of the Deka GC10DT is 4 to 6 years in regular device use without Start-Stop. In cold regions it drops slightly due to cold-start stress; in very hot regions it also drops because of electrolyte evaporation. To extend its life: avoid deep discharges (headlights on with engine off), have the alternator checked yearly, and keep the battery clean and properly secured.
What are the measurements of the GC10DT model?
Dimensions (length × width × height) are 260×181×276 mm — also written as 260x181x276 mm — following the European DIN standard. Always measure the space in your device before buying: even one extra millimetre can prevent the hold-down clamp from closing. The height shown includes the terminals.
What are the equivalents of the GC10DT model?
Directly interchangeable batteries (same dimensions, same polarity, same Ah and CCA) are the OEM equivalents from leading brands: Bosch, Tudor, Exide and, depending on the model, Banner or Yuasa. Exact equivalence depends on technology — an EFB cannot be replaced with a conventional battery in Start-Stop devices. See the "Equivalents" section to view recommended options at the same performance level.
The top-rated online battery store in Spain
-
Audited by Trustpilot, no filters, no edits. The top-rated battery store in Spain.
Trustpilot · verified, no filters
-
Official Varta distributor
Official Varta wholesale distributor. 100% genuine batteries, recently manufactured, best price and no middlemen.
World’s best-selling battery brand
-
+100,000 satisfied customers
More than 100,000 customers already trust baterias.com — and recommend us to their friends and family.
They trust us and recommend us
Choose trust, choose quality, choose baterias.com.