Exide AGM12-7F · Motorcycle battery 12V 7Ah 85A AGM

Motorcycle battery Exide AGM12-7F 12V 7Ah 85A AGM - 1
search
  • Motorcycle battery Exide AGM12-7F 12V 7Ah 85A AGM - 1
  • Motorcycle battery Exide AGM12-7F 12V 7Ah 85A AGM - 2

Specifications

BrandEXIDE
Part numberAGM12-7F
Voltage (V)12
Capacity (C20)7Ah (c20)
Capacity (C10)7Ah (c10)
TechnologyAGM
Length150.00 cm
Width65.00 cm
Height95.00 cm
See the full specifications →
€44.70
VAT included
Quantity

  • 24-48h delivery
  • 14-day returns
  • Secure payment
  • +11,700 reviews

Brand EXIDE Reference AGM12-7F

Urgent battery installation service Home installation within 1 to 3 hours
Málaga With our urgent home battery installation service, you buy your battery and within approximately 1 to 3 hours a qualified technician will install it comfortably at your home.

Check service availability in your area

Order today (Monday) before 6 pm (mainland Spain time) and we will dispatch by urgent courier so you receive it comfortably at home tomorrow (Tuesday) before 14:00

Service available in mainland Spain and Portugal

4,70· 9 reseñas
4,70/5★★★★★9 reviewsVerified purchases
  • ★★★★Mohamed Saez: Pedí la bateria un miércoles a las 5 y me llegó el jueves a las 8
  • ★★★★Diego Ortega: Pedí la batería un miércoles a las 5 y me llegó el jueves a las 6
  • ★★★★★Xavier Castillo: Precios buenos y un gran servicio. 100% recomendado
See all 9 reviews

Exide AGM12-7F 12V 7Ah 85A is a motorcycle starter battery with standard JIS code (the one on your bike's original label). Ready to use, sealed and vibration-resistant. Fits any model that takes the same JIS reference — the code your mechanic recognises at a glance.

Why this motorcycle battery?

  • Same JIS referenceas your bike's original — fits first time
  • Sealed and ready to useno acid handling, no refills
  • Survives winter storageholds charge through long off-season
Voltage
12 V
Capacity
7 Ah C20
Cold cranking
85 A EN-1
Dimensions
150×65×95 mm
Technology
AGM
Polarity
Positive on the left
Weight
2,5 kg
Model
EXIDE MOTO AGM 12V
Mfr. reference
AGM12-7F
Logo Exide

Motorcycle battery Exide AGM12-7F Moto AGM 7Ah 85A 12V

12VVoltage
7AhCapacity
85ACold cranking
2.50kgWeight

With 7 Ah at 12 V and 85 A of cold cranking current (EN), the Exide AGM12-7F with AGM technology replaces the original battery of motorcycles, scooters, quads and personal watercraft. Measuring 150 × 65 × 95 mm and the positive terminal on the left, it is the direct replacement for motorcycles fitted from the factory with a 7 Ah battery of this format.

  • Holds its charge through winter storage.
  • Compact and lightweight format.
  • AGM: faster recharging and better cycle resistance than a conventional battery.
  • Sealed and ready to fit, no acid handling.

What the Exide AGM12-7F is for

Designed for motorcycles, scooters, quads and personal watercraft, the Exide AGM12-7F replaces the original battery of bikes that use this code or format. Check the position of the positive terminal before ordering. Check that it matches your current battery in dimensions, terminals and hold-down: this reference has a weight of 2.50 kg, Faston S (4 8) terminals and B0 hold-down.

The Exide AGM12-7F: Moto AGM range and AGM technology

Within the Exide catalogue, the Moto AGM series groups the references designed for this use. The AGM12-7F is the 7 Ah model of that family, with the same performance as its siblings in other sizes.

AGM means the acid is held in a glass mat instead of floating free. That is why the battery can be installed in the cabin without gases, survives more cycles and recovers its charge quickly.

Dimensions, polarity and mounting

It has external dimensions of 150 × 65 × 95 mm and weighs 2.50 kg. The positive terminal on the left decides which side the cables end up on: it is the detail that causes most buying mistakes, so check it before ordering. It uses a B0 hold-down and Faston S (4 8) terminals, the system that anchors and connects it in the vehicle. For a direct replacement, the current battery tray must accept these dimensions and the same terminal layout; otherwise adapters will be needed or the hold-down will change.

What Exide does differently

With more than a century of history, Exide Technologies manufactures automotive, marine, motorcycle and industrial batteries in Europe. Its presence as original equipment on assembly lines vouches for the quality of every reference. We guarantee that every Exide arrives new, charged and with the manufacturer's full warranty.

How to make it last longer

If the bike spends the winter standing, connect a trickle charger: deep discharge through inactivity is the first cause of premature failure. Avoid repeated cranking attempts on a cold bike for long: if it does not start on the third try, let the battery rest for a minute.

Warranty and coverage

The Exide AGM12-7F comes with the manufacturer's official warranty. The warranty does not cover discharge through prolonged inactivity: if the bike stands for months, use a trickle charger.

Delivery times and returns

Same-day dispatch from our warehouse for in-stock orders placed before 6:00 pm: 24-48 working hours in mainland Spain and Portugal, 3 to 5 days in the islands and the rest of Europe. Returns are accepted for 14 days if the battery has not been used (free collection on the Iberian mainland). You will receive tracking by email.

BCOM-EXIDE-AGM12-7F

Data sheet

Brand
EXIDE
Reference
AGM12-7F
Model
EXIDE MOTO AGM 12V
Voltage (V)
12
Length
150.00 cm
Width
65.00 cm
Height
95.00 cm
Weight
2.50 Kgs
Technology
AGM
EAN
3661024036306
Terminal layout
Positive terminal on the left
Terminal type
Faston S (4 8)
Hold-down
B0
Cold cranking amps (EN)
85A
Capacity (C20)
7Ah (c20)
Capacity (C10)
7Ah (c10)

Specific References

EAN13
3661024036306
MPN
AGM12-7F
4,70/5
★★★★★9 reviews
Verified purchases
Latest verified reviews
★★★★★Mohamed Saez
19/09/2026
Entrega muy rápida

Pedí la bateria un miércoles a las 5 y me llegó el jueves a las 8

★★★★★Diego Ortega
17/06/2026
Entrega al día siguiente

Pedí la batería un miércoles a las 5 y me llegó el jueves a las 6

★★★★★Xavier Castillo
13/02/2026
Servicio sobresaliente

Precios buenos y un gran servicio. 100% recomendado

★★★★★Jose Ferrer
27/01/2026
Servicio autentico

Muy buena atención. Gracias

★★★★★Mario Bravo
03/01/2026
Muy bien

En general todo bien

Codes and references Exide AGM12-7F

Brand Exide · see all batteries Exide
Manufacturer range EXIDE MOTO AGM 12V
Manufacturer reference (MPN) AGM12-7F
EAN-13 barcode 3661024036306
Dimensions (length × width × height) 150 × 65 × 95 mm (150x65x95)

Recommended accessories — complement the Exide AGM12-7F with a charger or tester

How to change the battery

Guide to replace your motorcycle battery in 10-15 minutes. Motorcycle batteries are light (2-5 kg) and usually need an 8 mm wrench.

⏱ 10-15 min🛠 Tools: 8 mm wrench (some bikes use 10 mm) · Protective gloves
  1. Step 1. Prepare the vehicle

    Park on a flat surface, switch off the engine and remove the key. Make sure all lights and electrical accessories are off. Wait 1-2 minutes before starting.

  2. Step 2. Locate the battery compartment

    On motorcycles it is usually under the seat, in the rear cowl or behind a side panel. Check the manual — access varies a lot between models.

  3. Step 3. Disconnect the negative (−) terminal

    Use the 10 mm wrench to loosen the negative cable nut (black, marked −) and remove the cable from the post. Move it aside so it cannot touch any bodywork.

  4. Step 4. Disconnect the positive (+) terminal

    Repeat with the positive cable (red, marked +). Important: never let a terminal touch metal of the car while the other is still connected.

  5. Step 5. Remove the old battery

    Loosen the hold-down clamp or the straps that secure it. Lift the battery carefully — typical weight 2-5 kg. Check the terminals are not corroded before fitting the new one.

  6. Step 6. Install the new battery

    Place the battery in the same orientation as the old one (positive terminal on the same side). Tighten the hold-down clamp firmly.

  7. Step 7. Connect the cables

    Connect the positive (+) terminal first, then the negative (−). Tighten the nuts with the wrench until each terminal does not move. Apply anti-spark grease if you have any.

  8. Step 8. Verify the engine starts

    Close the bonnet. Start the engine to confirm everything works. On cars with Start-Stop or a BMS, you may need to register the battery via OBD so the alternator applies the correct charging profile.

Frequently asked questions

Is the AGM12-7F model AGM? What does this technology offer?

Yes. The AGM12-7F from Exide uses AGM (Absorbent Glass Mat) technology: a sealed lead-acid battery where the electrolyte is absorbed in a glass-fibre mat. It withstands more charge/discharge cycles than a conventional one, handles heat better and is the required technology for motorcycles with advanced Start-Stop and regenerative braking. Expected lifespan: 5-8 years under normal conditions.

How is the Exide AGM12-7F battery installed in the vehicle?

In most motorcycles it fits in 15-30 minutes with a 10 mm wrench; if the battery is under the seat or in the boot the time can double. See the step-by-step guide on this page. Quick summary: 1) switch off the engine and remove the key; 2) locate the original battery (engine bay, boot or under seat); 3) disconnect the negative (−) terminal first, then the positive (+); 4) loosen the hold-down clamp and remove the old battery; 5) fit the new one in the same orientation — match the polarity shown on the product sheet; 6) connect the positive (+) first, then the negative (−). On motorcycles with Start-Stop or BMS, register the battery via OBD so the alternator applies the correct charging profile.

What is the service life of the AGM12-7F model?

Expected lifespan of the Exide AGM12-7F is 5 to 8 years in mild-climate motorcycle use with Start-Stop. In cold regions it drops slightly due to cold-start stress; in very hot regions it also drops because of electrolyte evaporation. To extend its life: avoid deep discharges (headlights on with engine off), have the alternator checked yearly, and keep the battery clean and properly secured.

What size is this battery?

Dimensions (length × width × height) are 150×65×95 mm — also written as 150x65x95 mm — following the European DIN standard. Always measure the space in your motorcycle before buying: even one extra millimetre can prevent the hold-down clamp from closing. The height shown includes the terminals.

Is the AGM12-7F valid for my vehicle?

Three options to confirm: 1) enter your number plate in the finder (DGT/DVLA/KBA auto-detect your model and engine); 2) check the "Compatible vehicles" tab on this page, where we list every vehicle verified by our technical team; 3) if you cannot find your model, message us on WhatsApp with brand, model, engine and year — we reply during business hours (Mon–Fri 10:00–13:30 and 16:40–18:00 (Spanish time, CET)). The AGM12-7F typically fits a wide range of European vehicles thanks to its standard DIN case format.

Which batteries are equivalent to the Exide AGM12-7F?

Directly interchangeable batteries (same dimensions, same polarity, same Ah and CCA) are the OEM equivalents from leading brands: Bosch, Tudor, Exide and, depending on the model, Banner or Yuasa. Exact equivalence depends on technology — an EFB cannot be replaced with a conventional battery in Start-Stop motorcycles. See the "Equivalents" section to view recommended options at the same performance level.


The top-rated online battery store in Spain

  • 4.5/5 · +11,700 reviews

    Audited by Trustpilot, no filters, no edits. The top-rated battery store in Spain.

    Trustpilot · verified, no filters

  • Official Varta distributor

    Official Varta wholesale distributor. 100% genuine batteries, recently manufactured, best price and no middlemen.

    World’s best-selling battery brand

  • +100,000 satisfied customers

    More than 100,000 customers already trust baterias.com — and recommend us to their friends and family.

    They trust us and recommend us

Choose trust, choose quality, choose baterias.com.