Specifications
| Brand | VARTA |
|---|---|
| Part number | 507901012 |
| Voltage (V) | 12 |
| Capacity (C20) | 7 |
| Capacity (C10) | 7Ah (c10) |
| Technology | AGM |
| Length | 150.00 mm |
| Width | 66.00 mm |
| Height | 94.00 mm |
Aquí encontré mi batería más barata
Tenía muchas dudas y me ayudaron a instalar mi batería
Tenía dudas pero cuando hablé con ellos, me convencieron. La recomiendo
Varta YT7B-BS 12V 7Ah 120A is a motorcycle starter battery with standard JIS code (the one on your bike's original label). Ready to use, sealed and vibration-resistant. Fits any model that takes the same JIS reference — the code your mechanic recognises at a glance.

The Varta YT7B-BS motorcycle battery (reference 507901012) is the 12 V, 7 Ah model with 120 A of cold cranking power (EN) from Varta's Powersports AGM range, designed for motorcycles, scooters, quads and personal watercraft. It replaces the original battery in motorcycles with the 150 × 66 × 94 mm format without any modifications: the same 7 Ah capacity and the same terminal layout (positive on the left).
The Varta YT7B-BS fits more than 19 vehicles: it is fitted as standard or used as a replacement by makes such as Ducati, Yamaha, Triumph Motorcycles, MBK, Suzuki and Beta. For anyone needing to change the battery in their Ducati or Yamaha, this Varta YT7B-BS reproduces the original specifications. The compatibility list also includes models from Kymco and Bombardier. Not sure whether it is the right one for your bike? Check in seconds by entering your registration in our finder.
Its external dimensions are 150 × 66 × 94 mm and it weighs 2,8 kg. The positive terminal on the left determines which side the cables end up on: it is the detail behind most mistaken purchases, so it is worth checking before ordering. Before replacing it, measure the space your current battery sits in: if it matches on all three dimensions and on the terminal layout, the swap is direct and needs no adapters.
The Powersports AGM range consists of sealed AGM motorcycle batteries, maintenance-free and ready to use, with immobilised electrolyte that makes them resistant to vibration and suitable for any mounting position.
They are the choice for modern motorcycles and scooters with on-board electronics, where the aim is zero maintenance and reliable starting with no leaks and no topping up with acid.
Unlike a car battery, what matters here is power density in a minimal size and resistance to vibration. It is the direct substitute for the original motorcycle battery, with the advantage of reliable starting even in the cold and after periods of inactivity.
Varta is a byword for reliability: original equipment on numerous European vehicles and one of the most proven brands on the market. Replacing your battery with a Varta restores OEM quality — the same performance as the factory-fitted unit — with the manufacturer's backing.
Varta batteries are made under the Clarios group with German technology and quality controls that make them one of the best-selling choices in Europe. As a lead battery, it is 100% recyclable through any collection point.
Varta is Europe's leading manufacturer of starter batteries: its production volume and its quality controls guarantee consistent reliability batch after batch, something own-brand makes cannot always promise.
The Varta YT7B-BS battery comes with the official manufacturer warranty.
If the bike goes unused for long spells, a trickle charger greatly extends the battery's life and prevents sulphation. Storing it somewhere dry and checking the terminals at the start of each season helps it start first time. Motorcycle batteries suffer in the cold and when left idle: in winter, a maintenance charger stops the battery from discharging completely. With this care, it will typically deliver well over several years of service.
Download the official technical sheet for this battery with all the manufacturer data.
Data sheet
Specific References
Aquí encontré mi batería más barata
Tenía muchas dudas y me ayudaron a instalar mi batería
Tenía dudas pero cuando hablé con ellos, me convencieron. La recomiendo
Resolvieron mis dudas para instalar la batería
Buen precio y además te dicen como instalar la batería
Llamé para pedir el localizador de mi paquete y me atendieron estupendamente
Puedes llamar, la asesoría es gratis y te ayudan a elegir batería y con la instalación
Recibí la batería incluso antes de lo previsto. Ya seré cliente fiel de esta web
Pedí la batería de mi coche un Jueves noche, y me llegó el Lunes. Todo correcto
Precio, tiempo de entrega y atención de 10. 100% recomendada
Aquí encontré mi bateria más barata
Tenía muchas dudas y me ayudaron a instalar mi bateria
| Brand | Varta · see all batteries Varta |
|---|---|
| Manufacturer range | Powersports AGM |
| Manufacturer reference (MPN) | 507901012 |
| ETN code | 507901012A514 |
| EAN-13 barcode | 4016987169049 |
| Dimensions (length × width × height) | 150 × 66 × 94 mm (150x66x94) |
The Varta 507901012 is interchangeable with these equivalent references: ET7B-BS (Exide).
| Product | Specifications | Technology | Price |
|---|---|---|---|
|
|
12V 7Ah 120A | AGM | €39.20 |
|
|
12V 7Ah 85A | AGM | €26.10 |
Equivalences verified by our technical team: same dimensions, polarity, capacity and CCA. Official manufacturer warranty on every option.
The Varta 507901012 fits 19 vehicles. Most searched below:
Guide to replace your motorcycle battery in 10-15 minutes. Motorcycle batteries are light (2-5 kg) and usually need an 8 mm wrench.
Park on a flat surface, switch off the engine and remove the key. Make sure all lights and electrical accessories are off. Wait 1-2 minutes before starting.
On motorcycles it is usually under the seat, in the rear cowl or behind a side panel. Check the manual — access varies a lot between models.
Use the 10 mm wrench to loosen the negative cable nut (black, marked −) and remove the cable from the post. Move it aside so it cannot touch any bodywork.
Repeat with the positive cable (red, marked +). Important: never let a terminal touch metal of the car while the other is still connected.
Loosen the hold-down clamp or the straps that secure it. Lift the battery carefully — typical weight 2-5 kg. Check the terminals are not corroded before fitting the new one.
Place the battery in the same orientation as the old one (positive terminal on the same side). Tighten the hold-down clamp firmly.
Connect the positive (+) terminal first, then the negative (−). Tighten the nuts with the wrench until each terminal does not move. Apply anti-spark grease if you have any.
Close the bonnet. Start the engine to confirm everything works. On cars with Start-Stop or a BMS, you may need to register the battery via OBD so the alternator applies the correct charging profile.
Yes. The YT7B-BS from Varta uses AGM (Absorbent Glass Mat) technology: a sealed lead-acid battery where the electrolyte is absorbed in a glass-fibre mat. It withstands more charge/discharge cycles than a conventional one, handles heat better and is the required technology for motorcycles with advanced Start-Stop and regenerative braking. Expected lifespan: 5-8 years under normal conditions.
In most motorcycles it fits in 15-30 minutes with a 10 mm wrench; if the battery is under the seat or in the boot the time can double. See the step-by-step guide on this page. Quick summary: 1) switch off the engine and remove the key; 2) locate the original battery (engine bay, boot or under seat); 3) disconnect the negative (−) terminal first, then the positive (+); 4) loosen the hold-down clamp and remove the old battery; 5) fit the new one in the same orientation — match the polarity shown on the product sheet; 6) connect the positive (+) first, then the negative (−). On motorcycles with Start-Stop or BMS, register the battery via OBD so the alternator applies the correct charging profile.
Expected lifespan of the Varta YT7B-BS is 5 to 8 years in mild-climate motorcycle use with Start-Stop. In cold regions it drops slightly due to cold-start stress; in very hot regions it also drops because of electrolyte evaporation. To extend its life: avoid deep discharges (headlights on with engine off), have the alternator checked yearly, and keep the battery clean and properly secured.
Dimensions (length × width × height) are 150×66×94 mm — also written as 150x66x94 mm — following the European DIN standard. Always measure the space in your motorcycle before buying: even one extra millimetre can prevent the hold-down clamp from closing. The height shown includes the terminals.
Three options to confirm: 1) enter your number plate in the finder (DGT/DVLA/KBA auto-detect your model and engine); 2) check the "Compatible vehicles" tab on this page, where we list every vehicle verified by our technical team; 3) if you cannot find your model, message us on WhatsApp with brand, model, engine and year — we reply during business hours (Mon–Fri 10:00–13:30 and 16:40–18:00 (Spanish time, CET)). The YT7B-BS fits 19 verified vehicle versions in our database.
Directly interchangeable batteries (same dimensions, same polarity, same Ah and CCA) are the OEM equivalents from leading brands: Bosch, Tudor, Exide and, depending on the model, Banner or Yuasa. Exact equivalence depends on technology — an EFB cannot be replaced with a conventional battery in Start-Stop motorcycles. See the "Equivalents" section to view recommended options at the same performance level.
Audited by Trustpilot, no filters, no edits. The top-rated battery store in Spain.
Trustpilot · verified, no filters
Official Varta distributor
Official Varta wholesale distributor. 100% genuine batteries, recently manufactured, best price and no middlemen.
World’s best-selling battery brand
+100,000 satisfied customers
More than 100,000 customers already trust baterias.com — and recommend us to their friends and family.
They trust us and recommend us
Choose trust, choose quality, choose baterias.com.