Exide EB12A-A · Motorcycle battery 12V 12Ah 165A

Motorcycle battery Exide EB12A-A 12V 12Ah 165A - 1
search
  • Motorcycle battery Exide EB12A-A 12V 12Ah 165A - 1
  • Motorcycle battery Exide EB12A-A 12V 12Ah 165A - 2
  • Motorcycle battery Exide EB12A-A 12V 12Ah 165A - 3

Specifications

BrandEXIDE
Part numberEB12A-A
Voltage (V)12
Capacity (C20)12Ah (c20)
TechnologyLead-acid
Length135.00 cm
Width80.00 cm
Height160.00 cm
Weight4.20 Kgs
See the full specifications →
€55.10
VAT included
Quantity

  • 24-48h delivery
  • 14-day returns
  • Secure payment
  • +11,800 reviews

Brand EXIDE Reference EB12A-A

Urgent battery installation service Home installation within 1 to 3 hours
Málaga With our urgent home battery installation service, you buy your battery and within approximately 1 to 3 hours a qualified technician will install it comfortably at your home.

Check service availability in your area

Order today (Wednesday) before 6 pm (mainland Spain time) and we will dispatch by urgent courier so you receive it comfortably at home tomorrow (Thursday) before 14:00

Service available in mainland Spain and Portugal

4,78· 34 reseñas

Exide EB12A-A 12V 12Ah 165A is a motorcycle starter battery with standard JIS code (the one on your bike's original label). Ready to use, sealed and vibration-resistant. Fits any model that takes the same JIS reference — the code your mechanic recognises at a glance.

Why this motorcycle battery?

  • Same JIS referenceas your bike's original — fits first time
  • Sealed and ready to useno acid handling, no refills
  • Survives winter storageholds charge through long off-season
JIS code
EB12A-A
Voltage
12 V
Capacity
12 Ah C20
Cold cranking
165 A EN-1
Dimensions
135×80×160 mm
Technology
Lead-acid
Polarity
Positive on the left
Weight
4,2 kg
Model
EXIDE MOTO CONVENTIONAL 12V
Mfr. reference
EB12A-A
Logo Exide

Motorcycle battery Exide EB12A-A Moto Convencional 12Ah 165A 12V

12VVoltage
12AhCapacity
165ACold cranking
4.20kgWeight

The Exide EB12A-A motorcycle battery is rated at 12 V, 12 Ah and 165 A of cold cranking current (EN) from the Moto Convencional range, and is designed for motorcycles, scooters, quads and personal watercraft. It replaces the original battery without adaptation in motorcycles with a 135 × 80 × 160 mm format: same 12 Ah capacity and the positive terminal on the left.

  • Resistant to the vibration typical of two wheels.
  • Energetic cranking for high-compression engines.
  • Conventional lead-acid: the most proven and economical technology.
  • Same JIS code as the original battery: fits first time.

What the Exide EB12A-A is for

The Exide EB12A-A is a common replacement in motorcycles, scooters, quads and personal watercraft. If your bike spends the winter standing, a trickle charger stops it reaching spring flat. Check that it matches your current battery in dimensions, terminals and hold-down: this reference has a weight of 4.20 kg, M06 terminals and B0 hold-down.

Dimensions, polarity and mounting

It has external dimensions of 135 × 80 × 160 mm and weighs 4.20 kg. The positive terminal on the left decides which side the cables end up on: it is the detail that causes most buying mistakes, so check it before ordering. It uses a B0 hold-down and M06 terminals, the system that anchors and connects it in the vehicle. Checking the three dimensions and the terminal position before buying avoids the most common mistake when replacing a battery.

The Exide EB12A-A: Moto Convencional range and conventional lead-acid technology

The EB12A-A is part of the Exide Moto Convencional range. Choosing the right reference within the series comes down to capacity, dimensions and terminals: technology and quality are common to the whole family.

The conventional lead-acid battery remains the most widespread technology thanks to its balance of capacity, cranking current and price. Well maintained and kept charged, it offers years of reliable service in vehicles without Start-Stop.

Why choose Exide batteries

With more than a century of history, Exide Technologies manufactures automotive, marine, motorcycle and industrial batteries in Europe. Its presence as original equipment on assembly lines vouches for the quality of every reference. We guarantee that every Exide arrives new, charged and with the manufacturer's full warranty.

Warranty and coverage

The Exide EB12A-A comes with the manufacturer's official warranty. The warranty does not cover discharge through prolonged inactivity: if the bike stands for months, use a trickle charger.

Usage and maintenance tips

Avoid repeated cranking attempts on a cold bike for long: if it does not start on the third try, let the battery rest for a minute. On batteries with filler caps, check the electrolyte level and top up only with distilled water.

When you get it and how to return it

Order before 6:00 pm with stock available and it leaves today: mainland Spain and Portugal receive it in 24-48 working hours, the islands and the rest of the EU in 3 to 5 days. You have 14 days to return it if it has not been installed, with free collection on the mainland, and shipment tracking by email.

BCOM-EXIDE-EB12A-A

Data sheet

Brand
EXIDE
Reference
EB12A-A
Model
EXIDE MOTO CONVENCIONAL 12V
Voltage (V)
12
Length
135.00 cm
Width
80.00 cm
Height
160.00 cm
Weight
4.20 Kgs
Technology
Lead-acid
EAN
3661024033299
Terminal layout
Positive terminal on the left
Terminal type
M06
Hold-down
B0
Cold cranking amps (EN)
165A
Capacity (C20)
12Ah (c20)

Specific References

EAN13
3661024033299
MPN
EB12A-A

Codes and references Exide EB12A-A

Brand Exide · see all batteries Exide
Manufacturer range EXIDE MOTO CONVENCIONAL 12V
Manufacturer reference (MPN) EB12A-A
EAN-13 barcode 3661024033299
Dimensions (length × width × height) 135 × 80 × 160 mm (135x80x160)

Comparison: Exide EB12A-A vs equivalents — alternatives with the same dimensions, Ah and CCA

The Exide EB12A-A is interchangeable with these equivalent references: 12N12A-4A-1 (Exide).

Product Specifications Technology Price
Exide EB12A-A Exide EB12A-A This battery ★ 4,8 12V 12Ah 165A Lead-acid €55.10
Exide 12N12A-4A-1 Exide 12N12A-4A-1 ★ 4,8 12V 12Ah 115A Lead-acid €51.95

Equivalences verified by our technical team: same dimensions, polarity, capacity and CCA. Official manufacturer warranty on every option.

Recommended accessories — complement the Exide EB12A-A with a charger or tester

How to change the battery

Guide to replace your motorcycle battery in 10-15 minutes. Motorcycle batteries are light (2-5 kg) and usually need an 8 mm wrench.

⏱ 10-15 min🛠 Tools: 8 mm wrench (some bikes use 10 mm) · Protective gloves
  1. Step 1. Prepare the vehicle

    Park on a flat surface, switch off the engine and remove the key. Make sure all lights and electrical accessories are off. Wait 1-2 minutes before starting.

  2. Step 2. Locate the battery compartment

    On motorcycles it is usually under the seat, in the rear cowl or behind a side panel. Check the manual — access varies a lot between models.

  3. Step 3. Disconnect the negative (−) terminal

    Use the 10 mm wrench to loosen the negative cable nut (black, marked −) and remove the cable from the post. Move it aside so it cannot touch any bodywork.

  4. Step 4. Disconnect the positive (+) terminal

    Repeat with the positive cable (red, marked +). Important: never let a terminal touch metal of the car while the other is still connected.

  5. Step 5. Remove the old battery

    Loosen the hold-down clamp or the straps that secure it. Lift the battery carefully — typical weight 2-5 kg. Check the terminals are not corroded before fitting the new one.

  6. Step 6. Install the new battery

    Place the battery in the same orientation as the old one (positive terminal on the same side). Tighten the hold-down clamp firmly.

  7. Step 7. Connect the cables

    Connect the positive (+) terminal first, then the negative (−). Tighten the nuts with the wrench until each terminal does not move. Apply anti-spark grease if you have any.

  8. Step 8. Verify the engine starts

    Close the bonnet. Start the engine to confirm everything works. On cars with Start-Stop or a BMS, you may need to register the battery via OBD so the alternator applies the correct charging profile.

Frequently asked questions

How is the Exide EB12A-A battery installed in the vehicle?

In most motorcycles it fits in 15-30 minutes with a 10 mm wrench; if the battery is under the seat or in the boot the time can double. See the step-by-step guide on this page. Quick summary: 1) switch off the engine and remove the key; 2) locate the original battery (engine bay, boot or under seat); 3) disconnect the negative (−) terminal first, then the positive (+); 4) loosen the hold-down clamp and remove the old battery; 5) fit the new one in the same orientation — match the polarity shown on the product sheet; 6) connect the positive (+) first, then the negative (−). On motorcycles with Start-Stop or BMS, register the battery via OBD so the alternator applies the correct charging profile.

How long does the Exide EB12A-A battery last?

Expected lifespan of the Exide EB12A-A is 4 to 6 years in regular motorcycle use without Start-Stop. In cold regions it drops slightly due to cold-start stress; in very hot regions it also drops because of electrolyte evaporation. To extend its life: avoid deep discharges (headlights on with engine off), have the alternator checked yearly, and keep the battery clean and properly secured.

What are the dimensions of the Exide EB12A-A battery?

Dimensions (length × width × height) are 135×80×160 mm — also written as 135x80x160 mm — following the European DIN standard. Always measure the space in your motorcycle before buying: even one extra millimetre can prevent the hold-down clamp from closing. The height shown includes the terminals.

Will the Exide EB12A-A battery fit my motorcycle?

Three options to confirm: 1) enter your number plate in the finder (DGT/DVLA/KBA auto-detect your model and engine); 2) check the "Compatible vehicles" tab on this page, where we list every vehicle verified by our technical team; 3) if you cannot find your model, message us on WhatsApp with brand, model, engine and year — we reply during business hours (Mon–Fri 10:00–13:30 and 16:40–18:00 (Spanish time, CET)). The EB12A-A typically fits a wide range of European vehicles thanks to its standard DIN case format.

Which interchangeable batteries are there for this one?

Directly interchangeable batteries (same dimensions, same polarity, same Ah and CCA) are the OEM equivalents from leading brands: Bosch, Tudor, Exide and, depending on the model, Banner or Yuasa. Exact equivalence depends on technology — an EFB cannot be replaced with a conventional battery in Start-Stop motorcycles. See the "Equivalents" section to view recommended options at the same performance level.


The top-rated online battery store in Spain

  • 4.5/5 · +11,800 reviews

    Audited by Trustpilot, no filters, no edits. The top-rated battery store in Spain.

    Trustpilot · verified, no filters

  • Official Varta distributor

    Official Varta wholesale distributor. 100% genuine batteries, recently manufactured, best price and no middlemen.

    World’s best-selling battery brand

  • +100,000 satisfied customers

    More than 100,000 customers already trust baterias.com — and recommend us to their friends and family.

    They trust us and recommend us

Choose trust, choose quality, choose baterias.com.