Exide ED2103-T · Truck battery 12V 210Ah 800A GEL
Specifications
| Brand | EXIDE |
|---|---|
| Part number | ED2103-T |
| Voltage (V) | 12 |
| Capacity (C20) | 210Ah (c20) |
| Technology | GEL |
| Length | 518.00 cm |
| Width | 279.00 cm |
| Height | 240.00 cm |
| Weight | 66.00 Kgs |
€1,480.70
VAT included
Exide ED2103-T 12V 210Ah 800A is a professional battery for heavy commercial vehicles. Withstands constant chassis vibration, supports long cold-engine cranks and keeps auxiliary services running (tachograph, heater, refrigeration, GPS) during driver's mandatory rest stops.
Why this truck battery?
- True Heavy Dutybuilt for intensive professional use
- Long cold-diesel cranksreliable even in extreme cold
- Powers services at idletachograph, heater and lights with engine off
Voltage
12 V
Capacity
210 Ah
Cold cranking
800 A
Dimensions
518×274×240 mm
Technology
GEL
Polarity
Positive on the left
Weight
66 kg
Model
EXIDE Endurance+PRO Gel
Truck battery Exide ED2103-T Endurance+Pro GEL 210Ah 800A 12V
12VVoltage
210AhCapacity
800ACold cranking
66kgWeight
The Exide ED2103-T truck battery is rated at 12 V, 210 Ah and 800 A of cold cranking current (EN) from the Endurance+Pro GEL range, and is prepared for trucks, buses, tractors and heavy machinery. It measures 518 × 279 × 240 mm, the format sought by anyone replacing a 210 Ah battery in trucks.
- Heavy Duty construction for intensive professional use.
- GEL technology: gelled electrolyte, fully sealed and maintenance-free.
- Designed for 24 V installations with two batteries in series.
- Powerful cold cranking for large-displacement diesel engines.
What the Exide ED2103-T is for
The Exide ED2103-T is designed for trucks, buses, tractors and heavy machinery. In 24 V installations with two batteries in series, replace both at the same time to avoid imbalance. Check that it matches your current battery in dimensions, terminals and hold-down: this reference has a weight of 66 kg.
Will it fit your current battery tray?
It has external dimensions of 518 × 279 × 240 mm and weighs 66 kg. For a direct replacement, the current battery tray must accept these dimensions and the same terminal layout; otherwise adapters will be needed or the hold-down will change.
The Exide ED2103-T: Endurance+Pro GEL range and GEL technology
The Endurance+Pro GEL is the Exide range the ED2103-T belongs to: it shares the same construction and quality criteria with the rest of the series, and varies in capacity and format to suit each vehicle.
A GEL battery is the choice when cycle resistance and safety matter most: no gases, no liquid and thousands of partial discharges in its lifetime.
Why choose Exide batteries
Exide is one of the world's largest battery manufacturers and an original-equipment supplier to many car makers. Its European plants produce starter, industrial and leisure batteries under original-equipment quality controls. At baterias.com we work directly with the manufacturer or its official distributor: real stock, brand-new product and official warranty.
Official warranty
The Exide ED2103-T comes with the manufacturer's official warranty against manufacturing defects. An important note for commercial vehicles: most trucks use two batteries connected in series (24 V installation). If you replace only one, the new battery works alongside the old one, which has already lost capacity; that imbalance shortens its life and the manufacturer may treat it as misuse. Always replace both at the same time.
How to make it last longer
GEL batteries need lower charging voltages: always use a charger with a GEL mode so as not to damage the electrolyte. Keep the terminals clean and tight and the battery firmly secured against chassis vibration.
Delivery times and returns
Order before 6:00 pm with stock available and it leaves today: mainland Spain and Portugal receive it in 24-48 working hours, the islands and the rest of the EU in 3 to 5 days. You have 14 days to return it if it has not been installed, with free collection on the mainland, and shipment tracking by email.
BCOM-EXIDE-ED2103-T
Data sheet
- Brand
- EXIDE
- Reference
- ED2103-T
- Model
- EXIDE ENDURANCE+PRO GEL
- Voltage (V)
- 12
- Length
- 518.00 cm
- Width
- 279.00 cm
- Height
- 240.00 cm
- Weight
- 66.00 Kgs
- Technology
- GEL
- EAN
- 3661024037624
- Cold cranking amps (EN)
- 800A
- Capacity (C20)
- 210Ah (c20)
Specific References
- EAN13
- 3661024037624
- MPN
- ED2103-T
Codes and references Exide ED2103-T
| Brand | Exide · see all batteries Exide |
|---|---|
| Manufacturer range | EXIDE ENDURANCE+PRO GEL |
| Manufacturer reference (MPN) | ED2103-T |
| EAN-13 barcode | 3661024037624 |
| Dimensions (length × width × height) | 518 × 274 × 240 mm (518x274x240) |
Comparison: Exide ED2103-T vs equivalents
The Exide ED2103-T is interchangeable with these equivalent references: N2 (Varta).
| Product | Specifications | Technology | Price |
|---|---|---|---|
Exide
ED2103-T
This battery
|
12V 210Ah 800A | Gel | €1,480.70 |
Varta
N2
|
12V 200Ah 1050A | Lead-acid | €283.20 |
Equivalences verified by our technical team: same dimensions, polarity, capacity and CCA. Official manufacturer warranty on every option.
Recommended accessories
How to change the battery
Guide to replace a truck battery in 30-60 minutes. Truck batteries weigh 25-50 kg — we recommend working in pairs and using a carrying strap.
Step 1. Prepare the vehicle
Park on a flat surface, switch off the engine and remove the key. Make sure all lights and electrical accessories are off. Wait 1-2 minutes before starting.
Step 2. Locate the battery
Open the bonnet. The battery is usually in the engine bay, but in many modern cars it may be in the boot or under the passenger seat. Check the manual if you cannot find it.
Step 3. Disconnect the negative (−) terminal
Use the 10 mm wrench to loosen the negative cable nut (black, marked −) and remove the cable from the post. Move it aside so it cannot touch any bodywork.
Step 4. Disconnect the positive (+) terminal
Repeat with the positive cable (red, marked +). Important: never let a terminal touch metal of the car while the other is still connected.
Step 5. Remove the old battery (two people)
Loosen the bottom hold-down clamp. Truck batteries weigh 25-50 kg — lift in pairs with gloves and a carrying strap. Forcing the lift alone risks back injury.
Step 6. Install the new battery
Place the battery in the same orientation as the old one (positive terminal on the same side). Tighten the hold-down clamp firmly.
Step 7. Connect the cables
Connect the positive (+) terminal first, then the negative (−). Tighten the nuts with the wrench until each terminal does not move. Apply anti-spark grease if you have any.
Step 8. Verify the engine starts
Close the bonnet. Start the engine to confirm everything works. On cars with Start-Stop or a BMS, you may need to register the battery via OBD so the alternator applies the correct charging profile.
Frequently asked questions
Is this battery GEL? What is the typical use?
Yes, this model is a GEL battery: sealed lead-acid where the electrolyte is in gel form. It tolerates deep discharges very well and is ideal for cyclic use (solar, motorhomes, electric wheelchairs, motorcycles). Requires a GEL-specific smart charger — max charge voltage ~14.1 V (vs 14.4-14.7 V for AGM). Lifespan 6-10 years.
How do I fit the ED2103-T model in my truck?
In most trucks it fits in 15-30 minutes with a 10 mm wrench; if the battery is under the seat or in the boot the time can double. See the step-by-step guide on this page. Quick summary: 1) switch off the engine and remove the key; 2) locate the original battery (engine bay, boot or under seat); 3) disconnect the negative (−) terminal first, then the positive (+); 4) loosen the hold-down clamp and remove the old battery; 5) fit the new one in the same orientation — match the polarity shown on the product sheet; 6) connect the positive (+) first, then the negative (−). On trucks with Start-Stop or BMS, register the battery via OBD so the alternator applies the correct charging profile.
What is the service life of the ED2103-T model?
Expected lifespan of the Exide ED2103-T is 6 to 10 years in cyclic use (marine, caravan, solar) with controlled discharges. In cold regions it drops slightly due to cold-start stress; in very hot regions it also drops because of electrolyte evaporation. To extend its life: avoid deep discharges (headlights on with engine off), have the alternator checked yearly, and keep the battery clean and properly secured.
What are the dimensions of the Exide ED2103-T battery?
Dimensions (length × width × height) are 518×274×240 mm — also written as 518x274x240 mm — following the European DIN standard. Always measure the space in your truck before buying: even one extra millimetre can prevent the hold-down clamp from closing. The height shown includes the terminals.
Is the ED2103-T valid for my vehicle?
Three options to confirm: 1) enter your number plate in the finder (DGT/DVLA/KBA auto-detect your model and engine); 2) check the "Compatible vehicles" tab on this page, where we list every vehicle verified by our technical team; 3) if you cannot find your model, message us on WhatsApp with brand, model, engine and year — we reply during business hours (Mon–Fri 10:00–13:30 and 16:40–18:00 (Spanish time, CET)). The ED2103-T typically fits a wide range of European vehicles thanks to its standard DIN case format.
What are the equivalents of the ED2103-T model?
Directly interchangeable batteries (same dimensions, same polarity, same Ah and CCA) are the OEM equivalents from leading brands: Bosch, Tudor, Exide and, depending on the model, Banner or Yuasa. Exact equivalence depends on technology — an EFB cannot be replaced with a conventional battery in Start-Stop trucks. See the "Equivalents" section to view recommended options at the same performance level.
The top-rated online battery store in Spain
-
Audited by Trustpilot, no filters, no edits. The top-rated battery store in Spain.
Trustpilot · verified, no filters
-
Official Varta distributor
Official Varta wholesale distributor. 100% genuine batteries, recently manufactured, best price and no middlemen.
World’s best-selling battery brand
-
+100,000 satisfied customers
More than 100,000 customers already trust baterias.com — and recommend us to their friends and family.
They trust us and recommend us
Choose trust, choose quality, choose baterias.com.