Exide ED851T Endurance+Pro GEL · Truck battery 85Ah 350A

Van battery Exide ED851T Endurance+Pro GEL 85Ah 350A 12V

Designed for vans and light commercial vehicles on delivery duty, the Exide ED851T from the Endurance+Pro GEL range adds 85 Ah and 350 A of cold cranking current (EN) to start under load and stop dozens of times a day. Its 349 × 175 × 235 mm and the positive terminal on the left make it the exact replacement for the 85 Ah battery fitted as standard to many vans.

• Reliable starting with a loaded vehicle in the cold.
• Longer service life than a passenger-car battery of the same size.
• Powers auxiliary equipment with the engine off.
• GEL: excellent resistance to deep discharge and long cycle life.

What the Exide ED851T is for

With 85 Ah, the Exide ED851T is the direct replacement for vans and light commercial vehicles on delivery duty that use this format. Check that it matches your current battery in dimensions, terminals and hold-down: this reference has a weight of 29.50 kg, EN taper post terminals and B0 hold-down.

Dimensions, polarity and mounting

The Exide ED851T is made in the 349 × 175 × 235 mm format and weighs 29.50 kg. The positive terminal on the left decides which side the cables end up on: it is the detail that causes most buying mistakes, so check it before ordering. It uses a B0 hold-down and EN taper post terminals, the system that anchors and connects it in the vehicle. Before replacing it, measure your current battery tray: if all three dimensions and the terminal positions match, the swap is direct and needs no adapters.

Exide: the maker behind the ED851T

With more than a century of history, Exide Technologies manufactures automotive, marine, motorcycle and industrial batteries in Europe. Its presence as original equipment on assembly lines vouches for the quality of every reference. All the Exide batteries in our catalogue are genuine product, recently manufactured and covered by the manufacturer's warranty.

The Exide ED851T: Endurance+Pro GEL range and GEL technology

The Endurance+Pro GEL is the Exide range the ED851T belongs to: it shares the same construction and quality criteria with the rest of the series, and varies in capacity and format to suit each vehicle.

GEL technology fixes the acid in a solid gel. That removes maintenance and leaks and gives very long cycle life, in exchange for slightly slower recharging and lower peak current than an AGM.

Care and maintenance

Keep the terminals clean and the battery firmly secured: vibration under load is the main enemy in delivery vehicles. GEL batteries need lower charging voltages: always use a charger with a GEL mode so as not to damage the electrolyte.

Warranty and coverage

The Exide ED851T comes with the manufacturer's official warranty against manufacturing defects. If it fails through a defect within the period, we replace it free of charge.

Shipping, delivery and returns

Order before 6:00 pm with stock available and it leaves today: mainland Spain and Portugal receive it in 24-48 working hours, the islands and the rest of the EU in 3 to 5 days. You have 14 days to return it if it has not been installed, with free collection on the mainland, and shipment tracking by email.