Exide U1-9 · Lawnmower battery 12V 24Ah 240A
Specifications
| Brand | EXIDE |
|---|---|
| Part number | U1-9 |
| Voltage (V) | 12 |
| Capacity (C20) | 24Ah (c20) |
| Cold cranking amps (EN) | 240A |
| Technology | Lead-acid |
| Length | 195.00 cm |
| Width | 130.00 cm |
| Height | 180.00 cm |
Exide U1-9 12V 24Ah 240A is a compact garden battery: strong cranking reserve and good tolerance to long idle periods between seasons.
Why this lawnmower battery?
- Same JIS referenceas your bike's original — fits first time
- Sealed and ready to useno acid handling, no refills
- Survives winter storageholds charge through long off-season

Motorcycle battery Exide U1-9 Moto Convencional 24Ah 240A 12V
With 24 Ah at 12 V and 240 A of cold cranking current (EN), the Exide U1-9 with conventional lead-acid technology replaces the original battery of motorcycles, scooters, quads and personal watercraft. It replaces the original battery without adaptation in motorcycles with a 195 × 130 × 180 mm format: same 24 Ah capacity and the positive terminal on the left.
- Resistant to the vibration typical of two wheels.
- Energetic cranking for high-compression engines.
- Conventional lead-acid: the most proven and economical technology.
- Same JIS code as the original battery: fits first time.
What the Exide U1-9 is for
With 24 Ah, the Exide U1-9 covers the starting of motorcycles, scooters, quads and personal watercraft. The JIS code on your current battery label is the safest way to confirm equivalence. Check that it matches your current battery in dimensions, terminals and hold-down: this reference has a weight of 8.30 kg, M11 terminals and B0 hold-down.
The Exide U1-9: Moto Convencional range and conventional lead-acid technology
Within the Exide catalogue, the Moto Convencional series groups the references designed for this use. The U1-9 is the 24 Ah model of that family, with the same performance as its siblings in other sizes.
Conventional lead-acid is the benchmark against which other technologies are compared: good cranking current, great tolerance to alternator charging and the best price per amp-hour.
Size, terminals and hold-down of the Exide U1-9
The Exide U1-9 is made in the 195 × 130 × 180 mm format and weighs 8.30 kg. The positive terminal on the left decides which side the cables end up on: it is the detail that causes most buying mistakes, so check it before ordering. It uses a B0 hold-down and M11 terminals, the system that anchors and connects it in the vehicle. Checking the three dimensions and the terminal position before buying avoids the most common mistake when replacing a battery.
What Exide does differently
Exide is one of the world's largest battery manufacturers and an original-equipment supplier to many car makers. Its European plants produce starter, industrial and leisure batteries under original-equipment quality controls. We guarantee that every Exide arrives new, charged and with the manufacturer's full warranty.
Usage and maintenance tips
Check the resting voltage before the season (above 12.6 V on a charged battery) and make sure the terminals are clean and tight. Avoid repeated cranking attempts on a cold bike for long: if it does not start on the third try, let the battery rest for a minute.
Official warranty
The Exide U1-9 comes with the manufacturer's official warranty. The warranty does not cover discharge through prolonged inactivity: if the bike stands for months, use a trickle charger.
Delivery times and returns
Same-day dispatch from our warehouse for in-stock orders placed before 6:00 pm: 24-48 working hours in mainland Spain and Portugal, 3 to 5 days in the islands and the rest of Europe. Returns are accepted for 14 days if the battery has not been used (free collection on the Iberian mainland). You will receive tracking by email.
Data sheet
-
BrandEXIDE
-
ReferenceU1-9
-
ModelEXIDE MOTO CONVENCIONAL 12V
-
Voltage (V)12
-
Length195.00 cm
-
Width130.00 cm
-
Height180.00 cm
-
Weight8.30 Kgs
-
TechnologyLead-acid
-
EAN3661024033626
-
Terminal layoutPositive terminal on the left
-
Terminal typeM11
-
Hold-downB0
-
Cold cranking amps (EN)240A
-
Capacity (C20)24Ah (c20)
Specific References
-
EAN133661024033626
-
MPNU1-9
Codes and references Exide U1-9
| Brand | Exide · see all Exide batteries |
|---|---|
| Manufacturer range | EXIDE MOTO CONVENCIONAL 12V |
| Manufacturer part number (MPN) | U1-9 |
| Also known as | U19 · U1 9 |
| EAN-13 barcode | 3661024033626 |
| Dimensions (length × width × height) | 195 × 130 × 180 mm (195x130x180) |
Recommended accessories
Frequently asked questions
How do I fit the U1-9 model in my truck?
In most trucks it fits in 15-30 minutes with a 10 mm wrench; if the battery is under the seat or in the boot the time can double. See the step-by-step guide on our blog. Quick summary: 1) switch off the engine and remove the key; 2) locate the original battery (engine bay, boot or under seat); 3) disconnect the negative (−) terminal first, then the positive (+); 4) loosen the hold-down clamp and remove the old battery; 5) fit the new one in the same orientation — with positive on the left match the polarity shown on the product sheet; 6) connect the positive (+) first, then the negative (−). On trucks with Start-Stop or BMS, register the battery via OBD so the alternator applies the correct charging profile.
How long does the Exide U1-9 battery last?
Expected lifespan of the Exide U1-9 is 4 to 6 years in regular truck use without Start-Stop. In cold regions it drops slightly due to cold-start stress; in very hot regions it also drops because of electrolyte evaporation. To extend its life: avoid deep discharges (headlights on with engine off), have the alternator checked yearly, and keep the battery clean and properly secured.
What are the dimensions of the Exide U1-9 battery?
Dimensions (length × width × height) are 195×130×180 mm — also written as 195x130x180 mm — following the European DIN standard. Always measure the space in your truck before buying: even one extra millimetre can prevent the hold-down clamp from closing. The height shown includes the terminals.
On which side is the positive of the U1-9 model?
Polarity: positive on the left. To identify it, place the battery in front of you with the terminals facing you and check which side the positive (+, marked with a red ring) is on. Before buying, verify the polarity matches your current battery: switching polarity forces longer cables or system reconfiguration, with short-circuit risk.
Does this battery fit my truck?
Three options to confirm: 1) enter your number plate in the finder (DGT/DVLA/KBA auto-detect your model and engine); 2) check the "Compatible vehicles" tab on this page, where we list every vehicle verified by our technical team; 3) if you cannot find your model, message us on WhatsApp with brand, model, engine and year — we reply during business hours (Mon–Fri 10:00–13:30 and 16:40–18:00 (Spanish time, CET)). The U1-9 typically fits a wide range of European vehicles thanks to its standard DIN case format.
What are the equivalents of the U1-9 model?
Directly interchangeable batteries (same dimensions, same polarity, same Ah and CCA) are the OEM equivalents from leading brands: Bosch, Tudor, Exide and, depending on the model, Banner or Yuasa. Exact equivalence depends on technology — an EFB cannot be replaced with a conventional battery in Start-Stop trucks. See the "Equivalents" section to view recommended options at the same performance level.
The top-rated online battery store in Spain
-
Audited by Trustpilot, no filters, no edits. The top-rated battery store in Spain.
Trustpilot · verified, no filters
-
Official Varta distributor
Official Varta wholesale distributor. 100% genuine batteries, recently manufactured, best price and no middlemen.
World’s best-selling battery brand
-
+100,000 satisfied customers
More than 100,000 customers already trust baterias.com — and recommend us to their friends and family.
They trust us and recommend us
Choose trust, choose quality, choose baterias.com.