Fulbat 6N6-3B/B-1 GEL · Motorcycle battery 6V 6.3Ah 50A GEL

Motorcycle battery Fulbat 6N6-3B/B-1 GEL 6V 6.3Ah 50A GEL
search
  • Motorcycle battery Fulbat 6N6-3B/B-1 GEL 6V 6.3Ah 50A GEL
  • Motorcycle battery Fulbat 6N6-3B/B-1 GEL 6V 6.3Ah 50A GEL

Specifications

BrandFULBAT
Part number6N6-3B/B-1 GEL
Voltage (V)6V
Capacity (C20)6.30Ah
Capacity (C10)6Ah (c10)
TechnologyGEL
Length95mm
Width55mm
Height117mm
See the full specifications →
€25.93
VAT included
Quantity

  • 24-48h delivery
  • 14-day returns
  • Secure payment
  • +11,800 reviews

Brand FULBAT Reference 6N6-3B/B-1 GEL

Fulbat 6N6-3B/B-1 GEL 6V 6,3Ah 50A is a sealed motorcycle battery ready to fit, with the JIS reference your mechanic recognises at a glance. Vibration-resistant, keeps voltage during the winter off-season and cranks first time when you take it out for a ride.

Why this motorcycle battery?

  • Same JIS referenceas your bike's original — fits first time
  • Sealed and ready to useno acid handling, no refills
  • Survives winter storageholds charge through long off-season
Voltage
6 V
Capacity
6,3 Ah C20
Cold cranking
50 A EN-1
Dimensions
95×55×117 mm
Technology
GEL
Polarity
Positive on the right
Logo Fulbat

Motorcycle battery Fulbat 6N6-3B/B-1 6.3Ah 50A 6V

6VVoltage
6.3AhCapacity
50ACold cranking

With 6.3 Ah at 6 V and 50 A of cold cranking current (EN), the Fulbat 6N6-3B/B-1 with GEL technology replaces the original battery of motorcycles, scooters, quads and personal watercraft. It measures 95 × 55 × 117 mm and the positive terminal on the right, the format sought by anyone replacing a 6.3 Ah battery in motorcycles.

  • Same JIS code as the original battery: fits first time.
  • GEL technology: gelled electrolyte, fully sealed and maintenance-free.
  • Energetic cranking for high-compression engines.
  • Resistant to the vibration typical of two wheels.

Size, terminals and hold-down of the Fulbat 6N6-3B/B-1

In terms of format, the Fulbat 6N6-3B/B-1 measures 95 × 55 × 117 mm (length × width × height). The positive terminal on the right decides which side the cables end up on: it is the detail that causes most buying mistakes, so check it before ordering. Before replacing it, measure your current battery tray: if all three dimensions and the terminal positions match, the swap is direct and needs no adapters.

What the Fulbat 6N6-3B/B-1 is for

The Fulbat 6N6-3B/B-1 is a common replacement in motorcycles, scooters, quads and personal watercraft. If your bike spends the winter standing, a trickle charger stops it reaching spring flat.

Technology inside the Fulbat 6N6-3B/B-1

Fulbat builds the 6N6-3B/B-1 to the same standards as the rest of its catalogue; what changes between references is capacity, format and terminal position.

GEL technology fixes the acid in a solid gel. That removes maintenance and leaks and gives very long cycle life, in exchange for slightly slower recharging and lower peak current than an AGM.

What Fulbat does differently

French brand Fulbat is a European reference in motorcycle, garden and leisure batteries: compact ranges, clear JIS codes and a consistent quality that workshops know well. At baterias.com we work directly with the manufacturer or its official distributor: real stock, brand-new product and official warranty.

Official warranty

The Fulbat 6N6-3B/B-1 comes with the manufacturer's official warranty. The warranty does not cover discharge through prolonged inactivity: if the bike stands for months, use a trickle charger.

How to make it last longer

Avoid repeated cranking attempts on a cold bike for long: if it does not start on the third try, let the battery rest for a minute. If the bike spends the winter standing, connect a trickle charger: deep discharge through inactivity is the first cause of premature failure.

When you get it and how to return it

Order before 6:00 pm with stock available and it leaves today: mainland Spain and Portugal receive it in 24-48 working hours, the islands and the rest of the EU in 3 to 5 days. You have 14 days to return it if it has not been installed, with free collection on the mainland, and shipment tracking by email.

BCOM-FULBAT-6N6-3B/B-1 GEL

Data sheet

Brand
FULBAT
Model
FULBAT Motorcycle GEL
Voltage (V)
6V
Length
95mm
Width
55mm
Height
117mm
Technology
GEL
Terminal layout
Positive right
Cold cranking amps (EN)
50A
Capacity (C20)
6.30Ah
Capacity (C10)
6Ah (c10)

Specific References

MPN
6N6-3B/B-1 GEL

Recommended accessories — complement the Fulbat 6N6-3B/B-1 GEL with a charger or tester

How to change the battery

Guide to replace your motorcycle battery in 10-15 minutes. Motorcycle batteries are light (2-5 kg) and usually need an 8 mm wrench.

⏱ 10-15 min🛠 Tools: 8 mm wrench (some bikes use 10 mm) · Protective gloves
  1. Step 1. Prepare the vehicle

    Park on a flat surface, switch off the engine and remove the key. Make sure all lights and electrical accessories are off. Wait 1-2 minutes before starting.

  2. Step 2. Locate the battery compartment

    On motorcycles it is usually under the seat, in the rear cowl or behind a side panel. Check the manual — access varies a lot between models.

  3. Step 3. Disconnect the negative (−) terminal

    Use the 10 mm wrench to loosen the negative cable nut (black, marked −) and remove the cable from the post. Move it aside so it cannot touch any bodywork.

  4. Step 4. Disconnect the positive (+) terminal

    Repeat with the positive cable (red, marked +). Important: never let a terminal touch metal of the car while the other is still connected.

  5. Step 5. Remove the old battery

    Loosen the hold-down clamp or the straps that secure it. Lift the battery carefully — typical weight 2-5 kg. Check the terminals are not corroded before fitting the new one.

  6. Step 6. Install the new battery

    Place the battery in the same orientation as the old one (positive terminal on the same side). Tighten the hold-down clamp firmly.

  7. Step 7. Connect the cables

    Connect the positive (+) terminal first, then the negative (−). Tighten the nuts with the wrench until each terminal does not move. Apply anti-spark grease if you have any.

  8. Step 8. Verify the engine starts

    Close the bonnet. Start the engine to confirm everything works. On cars with Start-Stop or a BMS, you may need to register the battery via OBD so the alternator applies the correct charging profile.

Frequently asked questions

How is the Fulbat 6N6-3B/B-1 GEL battery installed in the vehicle?

In most motorcycles it fits in 15-30 minutes with a 10 mm wrench; if the battery is under the seat or in the boot the time can double. See the step-by-step guide on this page. Quick summary: 1) switch off the engine and remove the key; 2) locate the original battery (engine bay, boot or under seat); 3) disconnect the negative (−) terminal first, then the positive (+); 4) loosen the hold-down clamp and remove the old battery; 5) fit the new one in the same orientation — match the polarity shown on the product sheet; 6) connect the positive (+) first, then the negative (−). On motorcycles with Start-Stop or BMS, register the battery via OBD so the alternator applies the correct charging profile.

What is the service life of the 6N6-3B/B-1 GEL model?

Expected lifespan of the Fulbat 6N6-3B/B-1 GEL is 4 to 7 years in regular use (depends on technology and climate). In cold regions it drops slightly due to cold-start stress; in very hot regions it also drops because of electrolyte evaporation. To extend its life: avoid deep discharges (headlights on with engine off), have the alternator checked yearly, and keep the battery clean and properly secured.

What size is this battery?

Dimensions (length × width × height) are 95×55×117 mm — also written as 95x55x117 mm — following the European DIN standard. Always measure the space in your motorcycle before buying: even one extra millimetre can prevent the hold-down clamp from closing. The height shown includes the terminals.

Will the Fulbat 6N6-3B/B-1 GEL battery fit my motorcycle?

Three options to confirm: 1) enter your number plate in the finder (DGT/DVLA/KBA auto-detect your model and engine); 2) check the "Compatible vehicles" tab on this page, where we list every vehicle verified by our technical team; 3) if you cannot find your model, message us on WhatsApp with brand, model, engine and year — we reply during business hours (Mon–Fri 10:00–13:30 and 16:40–18:00 (Spanish time, CET)). The 6N6-3B/B-1 GEL typically fits a wide range of European vehicles thanks to its standard DIN case format.

What are the equivalents of the 6N6-3B/B-1 GEL model?

Directly interchangeable batteries (same dimensions, same polarity, same Ah and CCA) are the OEM equivalents from leading brands: Bosch, Tudor, Exide and, depending on the model, Banner or Yuasa. Exact equivalence depends on technology — an EFB cannot be replaced with a conventional battery in Start-Stop motorcycles. See the "Equivalents" section to view recommended options at the same performance level.


The top-rated online battery store in Spain

  • 4.5/5 · +11,800 reviews

    Audited by Trustpilot, no filters, no edits. The top-rated battery store in Spain.

    Trustpilot · verified, no filters

  • Official Varta distributor

    Official Varta wholesale distributor. 100% genuine batteries, recently manufactured, best price and no middlemen.

    World’s best-selling battery brand

  • +100,000 satisfied customers

    More than 100,000 customers already trust baterias.com — and recommend us to their friends and family.

    They trust us and recommend us

Choose trust, choose quality, choose baterias.com.