Mk powered 8GTE35 · Wheelchair battery 6V 196Ah GEL
Specifications
| Brand | MK POWERED |
|---|---|
| Part number | 8GTE35 |
| Voltage (V) | 6 |
| Capacity (C20) | 196Ah (c20) |
| Capacity (C10) | 183Ah (c10) |
| Capacity (C5) | 167Ah (c5) |
| Technology | GEL |
| Length | 244.90 mm |
| Width | 190.80 mm |
€459.70
VAT included
4,58/5★★★★★9 reviewsVerified purchases
- ★★★★★Cristian Molina:
Os animo a llamar si necesitais asesoriamiento, a mi me funcionó
- ★★★★★Iker Garrido:
Pedí la batería en Viernes y el Lunes ya la tenía aquí
- ★★★★Juan Antonio Moya:
Gracias a vosotros pude instalar la batería en mi coche
Reviews originally written in Spanish
See all 9 reviewsMK Powered 8GTE35 6V 196Ah is a sealed AGM/GEL battery for daily mobility use: maintenance-free, no risk of spills, and thousands of useful cycles well beyond a starter battery.
Why this wheelchair battery?
- Daily cycling without wearhandles deep discharges without losing capacity
- Sealed AGM/GELno maintenance, no risk of spills
- Thousands of useful cyclesover its full lifetime
Voltage
6 V
Capacity
196 Ah
Dimensions
244×190×270 mm
Technology
GEL
Weight
31,3 kg
Model
MK GEL
Mobility battery MK Powered 8GTE35 Mk GEL 196Ah 6V
6VVoltage
196AhCapacity
31.30kgWeight
The 6 V, 196 Ah MK Powered 8GTE35 from the Mk GEL range with GEL technology is the standard replacement for power wheelchairs, mobility scooters and light electric vehicles. It replaces the original battery without adaptation in power wheelchairs and mobility scooters with a 244 × 190 × 270 mm format: same 196 Ah capacity.
- Thousands of useful cycles over its lifetime.
- Standard replacement format for wheelchairs and scooters.
- GEL technology: gelled electrolyte, fully sealed and maintenance-free.
- Designed to be discharged and recharged daily without losing capacity.
What the MK Powered 8GTE35 is for
The MK Powered 8GTE35 is designed for power wheelchairs, mobility scooters and light electric vehicles. Wheelchairs and scooters normally use two identical batteries in series: replace them together. Check that it matches your current battery in dimensions, terminals and hold-down: this reference has a weight of 31.30 kg and EAPT terminals.
The MK Powered 8GTE35: Mk GEL range and GEL technology
The Mk GEL is the MK Powered range the 8GTE35 belongs to: it shares the same construction and quality criteria with the rest of the series, and varies in capacity and format to suit each vehicle.
In a GEL battery the electrolyte is gelled with silica: it is fully sealed, cannot spill and tolerates deep discharge very well. It is the preferred technology in electric mobility, marine service and heavy-cycling applications.
Will it fit your current battery tray?
The MK Powered 8GTE35 is made in the 244 × 190 × 270 mm format and weighs 31.30 kg. It uses EAPT terminals, the system that anchors and connects it in the vehicle. Before replacing it, measure your current battery tray: if all three dimensions and the terminal positions match, the swap is direct and needs no adapters.
What MK Powered does differently
MK batteries are the standard in the electric mobility sector: sealed, approved for air transport and with the consistency that wheelchair manufacturers demand as original equipment. We guarantee that every MK Powered arrives new, charged and with the manufacturer's full warranty.
Usage and maintenance tips
Recharge the wheelchair or scooter after each use and do not leave it discharged for days: lead sulphates and loses capacity. Use the original charger or one compatible with the battery technology (AGM/GEL) and always replace both batteries in the set together.
Manufacturer's warranty
The MK Powered 8GTE35 comes with the manufacturer's official warranty against manufacturing defects. If it fails through a defect within the warranty period, we replace it at no cost to you.
Delivery times and returns
Order before 6:00 pm with stock available and it leaves today: mainland Spain and Portugal receive it in 24-48 working hours, the islands and the rest of the EU in 3 to 5 days. You have 14 days to return it if it has not been installed, with free collection on the mainland, and shipment tracking by email.
BCOM-MK-8GTE35
Data sheet
- Brand
- MK
- Reference
- 8GTE35
- Model
- MK GEL
- Voltage (V)
- 6
- Length
- 244.90 mm
- Width
- 190.80 mm
- Height
- 270.50 mm
- Weight
- 31.3 Kgs
- Technology
- GEL
- Terminal type
- EAPT
- Capacity (C20)
- 196Ah (c20)
- Capacity (C10)
- 183Ah (c10)
- Capacity (C5)
- 167Ah (c5)
Specific References
- MPN
- 8GTE35
4,58/5
Verified purchasesLatest verified reviews
Reviews originally written in Spanish
★★★★★Cristian Molina
10/07/2026Excelente asesoramiento
Os animo a llamar si necesitais asesoriamiento, a mi me funcionó
★★★★★Iker Garrido
25/01/2026Me llegó al día siguiente
Pedí la batería en Viernes y el Lunes ya la tenía aquí
★★★★★Juan Antonio Moya
18/01/2026Encontré lo que buscaba
Gracias a vosotros pude instalar la batería en mi coche
★★★★★Miguel Angel Duran
07/01/2026Muy buena ayuda con la instalación
Ya me había encantado que me ayudaran con la elección de la MK 8GTE35, pero es que encima me asesoraron al momento de instalarla. Todo de 10
Recommended accessories
How to change the battery
Guide to replace a cyclic battery (12V 4-30Ah) for UPS, mobility scooter, alarm or backup device. Estimated time 10-15 minutes. Important: discharge residual voltage before handling.
Step 1. Power off and unplug the device
Unplug the device (UPS, scooter, alarm) and leave it off for at least 30 seconds to discharge residual capacitor voltage. Work on an insulating surface.
Step 2. Locate the battery compartment
Usually under the seat (mobility scooter/wheelchair), in the rear module of the UPS, or behind a side panel with screws. Check the device manual for unusual models.
Step 3. Disconnect the negative (−) first
With insulated gloves, remove the negative (−) cable first. Some UPS have protection fuses — note their position before removing.
Step 4. Disconnect the positive (+) terminal
Repeat with the positive cable (red, marked +). Important: never let a terminal touch metal of the car while the other is still connected.
Step 5. Remove the old battery
Typical weight 1-15 kg depending on capacity. Many cyclic batteries are AGM/GEL — keep them upright. Do NOT invert the battery: even sealed, residue may exist.
Step 6. Fit the new battery
Same orientation and type (AGM, GEL or flooded). Polarity must match the device, not a chassis (this is not a car). Make sure terminals do not touch metal parts of the compartment.
Step 7. Connect the positive (+) first
On cyclic devices the order is reversed compared to cars: positive (+) first, negative (−) afterwards. Tighten without forcing — the plastic terminal housing of cyclic batteries damages easily.
Step 8. Initial charge before first use
Cyclic batteries ship at 60-80%. Before first use, connect the device charger for 8-12 hours (or use an AGM/GEL smart charger if available). This avoids short cycles and extends lifespan.
Frequently asked questions
Is the 8GTE35 model a gel battery? Where is it used?
Yes, this model is a GEL battery: sealed lead-acid where the electrolyte is in gel form. It tolerates deep discharges very well and is ideal for cyclic use (solar, motorhomes, electric wheelchairs, motorcycles). Requires a GEL-specific smart charger — max charge voltage ~14.1 V (vs 14.4-14.7 V for AGM). Lifespan 6-10 years.
How is the MK Powered 8GTE35 battery installed in the vehicle?
In most devices it fits in 15-30 minutes with a 10 mm wrench; if the battery is under the seat or in the boot the time can double. See the step-by-step guide on this page. Quick summary: 1) switch off the engine and remove the key; 2) locate the original battery (engine bay, boot or under seat); 3) disconnect the negative (−) terminal first, then the positive (+); 4) loosen the hold-down clamp and remove the old battery; 5) fit the new one in the same orientation — match the polarity shown on the product sheet; 6) connect the positive (+) first, then the negative (−). On devices with Start-Stop or BMS, register the battery via OBD so the alternator applies the correct charging profile.
How long does the MK Powered 8GTE35 battery last?
Expected lifespan of the MK Powered 8GTE35 is 6 to 10 years in cyclic use (marine, caravan, solar) with controlled discharges. In cold regions it drops slightly due to cold-start stress; in very hot regions it also drops because of electrolyte evaporation. To extend its life: avoid deep discharges (headlights on with engine off), have the alternator checked yearly, and keep the battery clean and properly secured.
What are the dimensions of the MK Powered 8GTE35 battery?
Dimensions (length × width × height) are 245×191×271 mm — also written as 245x191x271 mm — following the European DIN standard. Always measure the space in your device before buying: even one extra millimetre can prevent the hold-down clamp from closing. The height shown includes the terminals.
Which batteries are equivalent to the MK Powered 8GTE35?
Directly interchangeable batteries (same dimensions, same polarity, same Ah and CCA) are the OEM equivalents from leading brands: Bosch, Tudor, Exide and, depending on the model, Banner or Yuasa. Exact equivalence depends on technology — an EFB cannot be replaced with a conventional battery in Start-Stop devices. See the "Equivalents" section to view recommended options at the same performance level.
The top-rated online battery store in Spain
-
Audited by Trustpilot, no filters, no edits. The top-rated battery store in Spain.
Trustpilot · verified, no filters
-
Official Varta distributor
Official Varta wholesale distributor. 100% genuine batteries, recently manufactured, best price and no middlemen.
World’s best-selling battery brand
-
+100,000 satisfied customers
More than 100,000 customers already trust baterias.com — and recommend us to their friends and family.
They trust us and recommend us
Choose trust, choose quality, choose baterias.com.