Mk powered ES12-12 · Wheelchair battery 12V 12Ah AGM
Specifications
| Brand | MK POWERED |
|---|---|
| Part number | ES12-12 |
| Voltage (V) | 12 |
| Capacity (C20) | 12Ah (c20) |
| Capacity (C10) | 11.4Ah (c10) |
| Capacity (C5) | 10.2Ah (c5) |
| Technology | AGM |
| Length | 150.90 mm |
| Width | 98.00 mm |
€55.10
VAT included
4,77/5★★★★★47 reviewsVerified purchases
- ★★★★★Enrique Garcia:
Excelente asesoramiento
- ★★★★★Alberto Herrera:
Pedí la batería en Viernes y el Lunes ya la tenía aquí
- ★★★★David Castillo:
Ya me había encantado que me ayudaran con la elección de la MK ES12-12, pero es que encima me asesoraron al momento de instalarla. Todo d…
MK Powered ES12-12 12V 12Ah is a deep-cycle battery for wheelchairs and mobility scooters, optimised to be discharged and recharged daily down to 80 % DOD without losing range.
Why this wheelchair battery?
- Daily cycling without wearhandles deep discharges without losing capacity
- Sealed AGM/GELno maintenance, no risk of spills
- Thousands of useful cyclesover its full lifetime
Voltage
12 V
Capacity
12 Ah
Dimensions
150×98×98 mm
Technology
AGM
Weight
4,01 kg
Model
MK AGM
Mobility battery MK Powered ES12-12 Mk AGM 12Ah 12V
12VVoltage
12AhCapacity
4.01kgWeight
Designed for power wheelchairs, mobility scooters and light electric vehicles, the MK Powered ES12-12 from the Mk AGM range offers 12 Ah of deep-cycle capacity with AGM technology. Measuring 150 × 98 × 98 mm, it is the direct replacement for power wheelchairs and mobility scooters fitted from the factory with a 12 Ah battery of this format.
- AGM: faster recharging and better cycle resistance than a conventional battery.
- Sealed AGM/GEL: safe indoors and in transport.
- No maintenance, no water top-ups.
- Approved for air and sea transport (VRLA).
What the MK Powered ES12-12 is for
The MK Powered ES12-12 is the usual replacement in power wheelchairs, mobility scooters and light electric vehicles. Recharge after each use and avoid leaving it discharged for days. Check that it matches your current battery in dimensions, terminals and hold-down: this reference has a weight of 4.01 kg and F2 terminals.
The MK Powered ES12-12: Mk AGM range and AGM technology
The ES12-12 is part of the MK Powered Mk AGM range. Choosing the right reference within the series comes down to capacity, dimensions and terminals: technology and quality are common to the whole family.
AGM (Absorbent Glass Mat) technology seals the electrolyte in glass microfibre. The result is a maintenance-free battery that is highly vibration-resistant and able to withstand deep discharges that would ruin a classic lead-acid battery.
Dimensions, polarity and mounting
It has external dimensions of 150 × 98 × 98 mm and weighs 4.01 kg. It uses F2 terminals, the system that anchors and connects it in the vehicle. Checking the three dimensions and the terminal position before buying avoids the most common mistake when replacing a battery.
MK Powered: the maker behind the ES12-12
MK Battery (MK Powered) is the US specialist in AGM and GEL batteries for mobility: power wheelchairs, scooters and medical equipment rely on its batteries for safety and cycle life. At baterias.com we work directly with the manufacturer or its official distributor: real stock, brand-new product and official warranty.
Usage and maintenance tips
Charge with a charger that has an AGM mode: it limits the voltage and protects the glass-fibre separators. Use the original charger or one compatible with the battery technology (AGM/GEL) and always replace both batteries in the set together.
Manufacturer's warranty
The MK Powered ES12-12 comes with the manufacturer's official warranty against manufacturing defects. If it fails through a defect within the warranty period, we replace it at no cost to you.
Shipping, delivery and returns
Order before 6:00 pm with stock available and it leaves today: mainland Spain and Portugal receive it in 24-48 working hours, the islands and the rest of the EU in 3 to 5 days. You have 14 days to return it if it has not been installed, with free collection on the mainland, and shipment tracking by email.
BCOM-MK-ES12-12
Data sheet
- Brand
- MK
- Reference
- ES12-12
- Model
- MK AGM
- Voltage (V)
- 12
- Length
- 150.90 mm
- Width
- 98.00 mm
- Height
- 98.00 mm
- Weight
- 4.01 Kgs
- Technology
- AGM
- Terminal type
- F2
- Capacity (C20)
- 12Ah (c20)
- Capacity (C10)
- 11.4Ah (c10)
- Capacity (C5)
- 10.2Ah (c5)
Specific References
- UPC
- 083996172623
- MPN
- ES12-12
4,77/5
Verified purchasesLatest verified reviews
★★★★★Enrique Garcia
28/06/2026Te asesoran gratis
Excelente asesoramiento
★★★★★Alberto Herrera
09/02/2026Entrega rápida
Pedí la batería en Viernes y el Lunes ya la tenía aquí
★★★★★David Castillo
08/02/2026Muy buena ayuda con la instalación
Ya me había encantado que me ayudaran con la elección de la MK ES12-12, pero es que encima me asesoraron al momento de instalarla. Todo de 10
★★★★★Andres Pascual
27/01/2026Buenos precios
Resultó facil instalar la batería en mi coche gracias a su asesoría. Web 100% recomendada
Recommended accessories
How to change the battery
Guide to replace a cyclic battery (12V 4-30Ah) for UPS, mobility scooter, alarm or backup device. Estimated time 10-15 minutes. Important: discharge residual voltage before handling.
Step 1. Power off and unplug the device
Unplug the device (UPS, scooter, alarm) and leave it off for at least 30 seconds to discharge residual capacitor voltage. Work on an insulating surface.
Step 2. Locate the battery compartment
Usually under the seat (mobility scooter/wheelchair), in the rear module of the UPS, or behind a side panel with screws. Check the device manual for unusual models.
Step 3. Disconnect the negative (−) first
With insulated gloves, remove the negative (−) cable first. Some UPS have protection fuses — note their position before removing.
Step 4. Disconnect the positive (+) terminal
Repeat with the positive cable (red, marked +). Important: never let a terminal touch metal of the car while the other is still connected.
Step 5. Remove the old battery
Typical weight 1-15 kg depending on capacity. Many cyclic batteries are AGM/GEL — keep them upright. Do NOT invert the battery: even sealed, residue may exist.
Step 6. Fit the new battery
Same orientation and type (AGM, GEL or flooded). Polarity must match the device, not a chassis (this is not a car). Make sure terminals do not touch metal parts of the compartment.
Step 7. Connect the positive (+) first
On cyclic devices the order is reversed compared to cars: positive (+) first, negative (−) afterwards. Tighten without forcing — the plastic terminal housing of cyclic batteries damages easily.
Step 8. Initial charge before first use
Cyclic batteries ship at 60-80%. Before first use, connect the device charger for 8-12 hours (or use an AGM/GEL smart charger if available). This avoids short cycles and extends lifespan.
Frequently asked questions
Is the ES12-12 model AGM? What does this technology offer?
Yes. The ES12-12 from MK Powered uses AGM (Absorbent Glass Mat) technology: a sealed lead-acid battery where the electrolyte is absorbed in a glass-fibre mat. It withstands more charge/discharge cycles than a conventional one, handles heat better and is the required technology for devices with advanced Start-Stop and regenerative braking. Expected lifespan: 5-8 years under normal conditions.
How is the MK Powered ES12-12 battery installed in the vehicle?
In most devices it fits in 15-30 minutes with a 10 mm wrench; if the battery is under the seat or in the boot the time can double. See the step-by-step guide on this page. Quick summary: 1) switch off the engine and remove the key; 2) locate the original battery (engine bay, boot or under seat); 3) disconnect the negative (−) terminal first, then the positive (+); 4) loosen the hold-down clamp and remove the old battery; 5) fit the new one in the same orientation — match the polarity shown on the product sheet; 6) connect the positive (+) first, then the negative (−). On devices with Start-Stop or BMS, register the battery via OBD so the alternator applies the correct charging profile.
What is the service life of the ES12-12 model?
Expected lifespan of the MK Powered ES12-12 is 5 to 8 years in mild-climate device use with Start-Stop. In cold regions it drops slightly due to cold-start stress; in very hot regions it also drops because of electrolyte evaporation. To extend its life: avoid deep discharges (headlights on with engine off), have the alternator checked yearly, and keep the battery clean and properly secured.
What size is this battery?
Dimensions (length × width × height) are 151×98×98 mm — also written as 151x98x98 mm — following the European DIN standard. Always measure the space in your device before buying: even one extra millimetre can prevent the hold-down clamp from closing. The height shown includes the terminals.
Which interchangeable batteries are there for this one?
Directly interchangeable batteries (same dimensions, same polarity, same Ah and CCA) are the OEM equivalents from leading brands: Bosch, Tudor, Exide and, depending on the model, Banner or Yuasa. Exact equivalence depends on technology — an EFB cannot be replaced with a conventional battery in Start-Stop devices. See the "Equivalents" section to view recommended options at the same performance level.
The top-rated online battery store in Spain
-
Audited by Trustpilot, no filters, no edits. The top-rated battery store in Spain.
Trustpilot · verified, no filters
-
Official Varta distributor
Official Varta wholesale distributor. 100% genuine batteries, recently manufactured, best price and no middlemen.
World’s best-selling battery brand
-
+100,000 satisfied customers
More than 100,000 customers already trust baterias.com — and recommend us to their friends and family.
They trust us and recommend us
Choose trust, choose quality, choose baterias.com.