Mk powered ES26-12 · Wheelchair battery 12V 26Ah AGM
Specifications
| Brand | MK POWERED |
|---|---|
| Part number | ES26-12 |
| Voltage (V) | 12 |
| Capacity (C20) | 26Ah (c20) |
| Capacity (C10) | 24.7Ah (c10) |
| Capacity (C5) | 22.1Ah (c5) |
| Technology | AGM |
| Length | 166.10 mm |
| Width | 175.00 mm |
€84.20
VAT included
4,83/5★★★★★25 reviewsVerified purchases
- ★★★★★Pablo Crespo:
Gracias por el asesoramiento
- ★★★★★Antonio Reyes:
Resuelven tus dudas y te ayudan con la instalación
- ★★★★★Aitor IbaÑez:
Resultó facil instalar la batería en mi coche gracias a su asesoría. Web 100% recomendada
Reviews originally written in Spanish
See all 25 reviewsMK Powered ES26-12 12V 26Ah is a sealed AGM/GEL battery for daily mobility use: maintenance-free, no risk of spills, and thousands of useful cycles well beyond a starter battery.
Why this wheelchair battery?
- Daily cycling without wearhandles deep discharges without losing capacity
- Sealed AGM/GELno maintenance, no risk of spills
- Thousands of useful cyclesover its full lifetime
Voltage
12 V
Capacity
26 Ah
Dimensions
166×175×125 mm
Technology
AGM
Polarity
Positive on the right
Weight
9,28 kg
Model
MK AGM
Mobility battery MK Powered ES26-12 Mk AGM 26Ah 12V
12VVoltage
26AhCapacity
9.28kgWeight
The 12 V, 26 Ah MK Powered ES26-12 from the Mk AGM range with AGM technology is the standard replacement for power wheelchairs, mobility scooters and light electric vehicles. Measuring 166 × 175 × 125 mm, it is the direct replacement for power wheelchairs and mobility scooters fitted from the factory with a 26 Ah battery of this format.
- AGM: faster recharging and better cycle resistance than a conventional battery.
- Sealed AGM/GEL: safe indoors and in transport.
- No maintenance, no water top-ups.
- Approved for air and sea transport (VRLA).
What the MK Powered ES26-12 is for
The MK Powered ES26-12 is designed for power wheelchairs, mobility scooters and light electric vehicles. Wheelchairs and scooters normally use two identical batteries in series: replace them together. Check that it matches your current battery in dimensions, terminals and hold-down: this reference has a weight of 9.28 kg.
Will it fit your current battery tray?
It has external dimensions of 166 × 175 × 125 mm and weighs 9.28 kg. Before replacing it, measure your current battery tray: if all three dimensions and the terminal positions match, the swap is direct and needs no adapters.
Why choose MK Powered batteries
MK batteries are the standard in the electric mobility sector: sealed, approved for air transport and with the consistency that wheelchair manufacturers demand as original equipment. At baterias.com we work directly with the manufacturer or its official distributor: real stock, brand-new product and official warranty.
The MK Powered ES26-12: Mk AGM range and AGM technology
The Mk AGM is the MK Powered range the ES26-12 belongs to: it shares the same construction and quality criteria with the rest of the series, and varies in capacity and format to suit each vehicle.
AGM (Absorbent Glass Mat) technology seals the electrolyte in glass microfibre. The result is a maintenance-free battery that is highly vibration-resistant and able to withstand deep discharges that would ruin a classic lead-acid battery.
How to make it last longer
Charge with a charger that has an AGM mode: it limits the voltage and protects the glass-fibre separators. Recharge the wheelchair or scooter after each use and do not leave it discharged for days: lead sulphates and loses capacity.
Official warranty
The MK Powered ES26-12 comes with the manufacturer's official warranty against manufacturing defects. If it fails through a defect within the warranty period, we replace it at no cost to you.
Delivery times and returns
Order before 6:00 pm with stock available and it leaves today: mainland Spain and Portugal receive it in 24-48 working hours, the islands and the rest of the EU in 3 to 5 days. You have 14 days to return it if it has not been installed, with free collection on the mainland, and shipment tracking by email.
BCOM-MK-ES26-12
Data sheet
- Brand
- MK
- Reference
- ES26-12
- Model
- MK AGM
- Voltage (V)
- 12
- Length
- 166.10 mm
- Width
- 175.00 mm
- Height
- 125.00 mm
- Weight
- 9.28 Kgs
- Technology
- AGM
- Capacity (C20)
- 26Ah (c20)
- Capacity (C10)
- 24.7Ah (c10)
- Capacity (C5)
- 22.1Ah (c5)
Specific References
- EAN13
- 3660766448538
- MPN
- ES26-12
4,83/5
Verified purchasesLatest verified reviews
Reviews originally written in Spanish
★★★★★Pablo Crespo
12/07/2026Gracias por su asesoramiento
Gracias por el asesoramiento
★★★★★Antonio Reyes
20/01/2026Gracias
Resuelven tus dudas y te ayudan con la instalación
★★★★★Aitor IbaÑez
23/12/2025Buenos precios
Resultó facil instalar la batería en mi coche gracias a su asesoría. Web 100% recomendada
Codes and references MK Powered ES26-12
| Brand | MK Powered |
|---|---|
| Manufacturer range | MK AGM |
| Manufacturer part number (MPN) | ES26-12 |
| Also known as | ES2612 · ES26 12 |
| EAN-13 barcode | 3660766448538 |
| Dimensions (length × width × height) | 166 × 175 × 125 mm (166x175x125) |
Recommended accessories
How to change the battery
Guide to replace a cyclic battery (12V 4-30Ah) for UPS, mobility scooter, alarm or backup device. Estimated time 10-15 minutes. Important: discharge residual voltage before handling.
Step 1. Power off and unplug the device
Unplug the device (UPS, scooter, alarm) and leave it off for at least 30 seconds to discharge residual capacitor voltage. Work on an insulating surface.
Step 2. Locate the battery compartment
Usually under the seat (mobility scooter/wheelchair), in the rear module of the UPS, or behind a side panel with screws. Check the device manual for unusual models.
Step 3. Disconnect the negative (−) first
With insulated gloves, remove the negative (−) cable first. Some UPS have protection fuses — note their position before removing.
Step 4. Disconnect the positive (+) terminal
Repeat with the positive cable (red, marked +). Important: never let a terminal touch metal of the car while the other is still connected.
Step 5. Remove the old battery
Typical weight 1-15 kg depending on capacity. Many cyclic batteries are AGM/GEL — keep them upright. Do NOT invert the battery: even sealed, residue may exist.
Step 6. Fit the new battery
Same orientation and type (AGM, GEL or flooded). Polarity must match the device, not a chassis (this is not a car). Make sure terminals do not touch metal parts of the compartment.
Step 7. Connect the positive (+) first
On cyclic devices the order is reversed compared to cars: positive (+) first, negative (−) afterwards. Tighten without forcing — the plastic terminal housing of cyclic batteries damages easily.
Step 8. Initial charge before first use
Cyclic batteries ship at 60-80%. Before first use, connect the device charger for 8-12 hours (or use an AGM/GEL smart charger if available). This avoids short cycles and extends lifespan.
Frequently asked questions
Is the MK Powered ES26-12 an AGM battery and what are the benefits of AGM?
Yes. The ES26-12 from MK Powered uses AGM (Absorbent Glass Mat) technology: a sealed lead-acid battery where the electrolyte is absorbed in a glass-fibre mat. It withstands more charge/discharge cycles than a conventional one, handles heat better and is the required technology for devices with advanced Start-Stop and regenerative braking. Expected lifespan: 5-8 years under normal conditions.
How do I fit the ES26-12 model in my device?
In most devices it fits in 15-30 minutes with a 10 mm wrench; if the battery is under the seat or in the boot the time can double. See the step-by-step guide on this page. Quick summary: 1) switch off the engine and remove the key; 2) locate the original battery (engine bay, boot or under seat); 3) disconnect the negative (−) terminal first, then the positive (+); 4) loosen the hold-down clamp and remove the old battery; 5) fit the new one in the same orientation — match the polarity shown on the product sheet; 6) connect the positive (+) first, then the negative (−). On devices with Start-Stop or BMS, register the battery via OBD so the alternator applies the correct charging profile.
How long does the MK Powered ES26-12 battery last?
Expected lifespan of the MK Powered ES26-12 is 5 to 8 years in mild-climate device use with Start-Stop. In cold regions it drops slightly due to cold-start stress; in very hot regions it also drops because of electrolyte evaporation. To extend its life: avoid deep discharges (headlights on with engine off), have the alternator checked yearly, and keep the battery clean and properly secured.
What are the dimensions of the MK Powered ES26-12 battery?
Dimensions (length × width × height) are 166×175×125 mm — also written as 166x175x125 mm — following the European DIN standard. Always measure the space in your device before buying: even one extra millimetre can prevent the hold-down clamp from closing. The height shown includes the terminals.
Which batteries are equivalent to the MK Powered ES26-12?
Directly interchangeable batteries (same dimensions, same polarity, same Ah and CCA) are the OEM equivalents from leading brands: Bosch, Tudor, Exide and, depending on the model, Banner or Yuasa. Exact equivalence depends on technology — an EFB cannot be replaced with a conventional battery in Start-Stop devices. See the "Equivalents" section to view recommended options at the same performance level.
The top-rated online battery store in Spain
-
Audited by Trustpilot, no filters, no edits. The top-rated battery store in Spain.
Trustpilot · verified, no filters
-
Official Varta distributor
Official Varta wholesale distributor. 100% genuine batteries, recently manufactured, best price and no middlemen.
World’s best-selling battery brand
-
+100,000 satisfied customers
More than 100,000 customers already trust baterias.com — and recommend us to their friends and family.
They trust us and recommend us
Choose trust, choose quality, choose baterias.com.