Batteries for Taylor Dunn ET3000
Electric utility vehicle batteries · Taylor DunnWhich battery does a Taylor Dunn ET3000 need?
Battery analysis for your Taylor Dunn ET3000
Quick answer You need an ordinary lead-acid battery of 250 Ah. Our recommendation: TROJAN J250P.
Prices and availability updated on 07/11/2026
Based on the batteries we found for your vehicle, our experts help you pick the right one.
📋 What we found
For your Taylor Dunn ET3000 we found 3 compatible batteries.
📏 Battery size
The list contains batteries in different sizes or capacities (Ah). In many cases both variants fit, but it's worth checking your compartment dimensions and the Ah of your original battery before buying. Choose the one with the same dimensions as your current battery: a bigger one may not fit the compartment or the hold-down. If several match your size, the higher capacity gives more headroom for cold starts.
⭐ Our recommendation
For your Taylor Dunn ET3000 we recommend the TROJAN J250P (ordinary lead-acid, 250 Ah). It also has the highest capacity (Ah) on the list — more autonomy to power consumers with the engine off and more reserve for prolonged loads.
See this battery →Thanks for your feedback! We keep improving.
💬 Customer opinions are very important to us. We'd appreciate it if you could leave a short comment about what you liked.
With the currently active filters no battery from the list is shown. Remove a filter to see compatible options.
Verified selection
- Class: Electric utility vehicle batteries
- Brand: Taylor Dunn
- Model: ET3000
Conventional Battery
This is a standard or conventional battery for vehicles without a start-stop system
-
Traction battery Trojan J250P 6V 250Ah
- 6 V
- 250 Ah
Dimensions 295×178×292 mm
- ✓ Highest Ah
Takes 8 units
€503.95
-
Golf cart battery Trojan T-105 6V 225Ah
- 6 V
- 225 Ah
Dimensions 262×181×283 mm
Takes 8 units
€204.04
-
Golf cart battery Trojan T-125 6V 240Ah
- 6 V
- 240 Ah
Dimensions 262×181×281 mm
Takes 8 units
€234.70
| Category | Make | Reference | Capacity | Dimensions | Technology | Price | |
|---|---|---|---|---|---|---|---|
| Conventional Battery | TROJAN | J250P | 250 Ah | 295×178×292 mm | Conventional | €503.95 | More info |
| Conventional Battery | TROJAN | T-105 | 225 Ah | 262×181×283 mm | Conventional | €204.04 | More info |
| Conventional Battery | TROJAN | T-125 | 240 Ah | 262×181×281 mm | Conventional | €234.70 | More info |
Frequently asked questions
- The Taylor Dunn ET3000 uses the battery shown on this page. Check voltage, capacity and dimensions before ordering. If there is no published price, ask for a quote and we reply the same day.
- Yes, as long as it has the same voltage, fits in the battery compartment and the Taylor Dunn ET3000 charger is compatible. More capacity (Ah) means more run time; changing the voltage or battery type without adapting the charger can damage the equipment.
- Many machines run at 24, 36 or 48 V with several 6, 8 or 12 V batteries connected in series (voltages add up; the Ah capacity is that of one unit). The model page tells you how many units it takes. Always replace the whole set with identical batteries of the same age.
- Not advisable. A starter battery delivers a lot of current for a few seconds; a deep-cycle battery has thick plates built to be discharged to 50-80% and recharged every day. In traction, cleaning or mobility equipment a starter battery lasts very few cycles.
- Some references are not published in the shop: click "Request a quote" and we reply the same working day with price and lead time. Those with a price can be bought online and ship the same day if you order before 6:00 pm.