Deta DJ1102 · Truck battery 12V 110Ah 900A

Truck battery Deta DJ1102 PowerPRO y Construction 110Ah 900A 12V

The Deta DJ1102 truck battery is rated at 12 V, 110 Ah and 900 A of cold cranking current (EN) from the PowerPRO y Construction range, and is prepared for trucks, buses, tractors and heavy machinery. Measuring 349 × 175 × 235 mm and the positive terminal on the right, it is the direct replacement for trucks fitted from the factory with a 110 Ah battery of this format.

In short: the Deta DJ1102 (110 Ah, 900 A, 349 × 175 × 235 mm, positive terminal on the right). Verified equivalent alternatives: Varta I18 and Tudor TF1202.

• Good balance of capacity, cranking power and price.
• Resistant to constant chassis vibration.
• Powers tachograph, fridge and heater during rest stops.
• Better tolerance to deep discharge than a conventional starter battery.

What the Deta DJ1102 is for

The Deta DJ1102 is designed for trucks, buses, tractors and heavy machinery. In 24 V installations with two batteries in series, replace both at the same time to avoid imbalance. Check that it matches your current battery in dimensions, terminals and hold-down: this reference has a weight of 28.30 kg and B01 hold-down.

The Deta DJ1102: PowerPRO y Construction range and conventional lead-acid technology

Within the Deta catalogue, the PowerPRO y Construction series groups the references designed for this use. The DJ1102 is the 110 Ah model of that family, with the same performance as its siblings in other sizes.

In a conventional battery the electrolyte is liquid and the lead plates are immersed in it. It is a mature, economical and easily recycled technology, ideal for starting vehicles in normal use.

Will it fit your current battery tray?

The Deta DJ1102 is made in the 349 × 175 × 235 mm format and weighs 28.30 kg. The positive terminal on the right decides which side the cables end up on: it is the detail that causes most buying mistakes, so check it before ordering. It uses a B01 hold-down, the system that anchors and connects it in the vehicle. Before replacing it, measure your current battery tray: if all three dimensions and the terminal positions match, the swap is direct and needs no adapters.

Deta: the maker behind the DJ1102

Deta combines German engineering with Exide's industrial capacity. Its Power, Senator and PowerPRO series cover everything from urban cars to construction machinery. At baterias.com we work directly with the manufacturer or its official distributor: real stock, brand-new product and official warranty.

Care and maintenance

Keep the terminals clean and tight and the battery firmly secured against chassis vibration. On batteries with filler caps, check the electrolyte level and top up only with distilled water.

Official warranty

The Deta DJ1102 comes with the manufacturer's official warranty against manufacturing defects. An important note for commercial vehicles: most trucks use two batteries connected in series (24 V installation). If you replace only one, the new battery works alongside the old one, which has already lost capacity; that imbalance shortens its life and the manufacturer may treat it as misuse. Always replace both at the same time.

Shipping, delivery and returns

Order before 6:00 pm with stock available and it leaves today: mainland Spain and Portugal receive it in 24-48 working hours, the islands and the rest of the EU in 3 to 5 days. You have 14 days to return it if it has not been installed, with free collection on the mainland, and shipment tracking by email.