Exide EF2353+ · Truck battery 12V 235Ah 1300A

Truck battery Exide EF2353+ 235Ah 1,300A 12V

The Exide EF2353+ with conventional lead-acid technology delivers 235 Ah at 12 V and 1,300 A of cold cranking current (EN): what trucks, buses, tractors and heavy machinery demand. Its 518 × 274 × 240 mm and the positive terminal on the left make it the exact replacement for the 235 Ah battery fitted as standard to many trucks.

In short: the Exide EF2353+ (235 Ah, 1300 A, 518 × 274 × 240 mm, positive left). Verified equivalent alternatives: Tudor TF2353 and Exide EF2353.

• Better tolerance to deep discharge than a conventional starter battery.
• Powers tachograph, fridge and heater during rest stops.
• Resistant to constant chassis vibration.
• Good balance of capacity, cranking power and price.

What the Exide EF2353+ is for

The Exide EF2353+ is designed for trucks, buses, tractors and heavy machinery. In 24 V installations with two batteries in series, replace both at the same time to avoid imbalance. Check that it matches your current battery in dimensions, terminals and hold-down: this reference has a weight of 56.30 kg, EN taper post terminals and B00 hold-down.

Technology inside the Exide EF2353+

Exide builds the EF2353+ to the same standards as the rest of its catalogue; what changes between references is capacity, format and terminal position.

Conventional lead-acid is the benchmark against which other technologies are compared: good cranking current, great tolerance to alternator charging and the best price per amp-hour.

Dimensions, polarity and mounting

It has external dimensions of 518 × 274 × 240 mm and weighs 56.30 kg. The positive terminal on the left decides which side the cables end up on: it is the detail that causes most buying mistakes, so check it before ordering. It uses a B00 hold-down and EN taper post terminals, the system that anchors and connects it in the vehicle. Before replacing it, measure your current battery tray: if all three dimensions and the terminal positions match, the swap is direct and needs no adapters.

Exide: the maker behind the EF2353+

With more than a century of history, Exide Technologies manufactures automotive, marine, motorcycle and industrial batteries in Europe. Its presence as original equipment on assembly lines vouches for the quality of every reference. At baterias.com we work directly with the manufacturer or its official distributor: real stock, brand-new product and official warranty.

How to make it last longer

In 24 V installations, check periodically that both batteries show the same voltage; an imbalance means one is failing. On batteries with filler caps, check the electrolyte level and top up only with distilled water.

Official warranty

The Exide EF2353+ comes with the manufacturer's official warranty against manufacturing defects. An important note for commercial vehicles: most trucks use two batteries connected in series (24 V installation). If you replace only one, the new battery works alongside the old one, which has already lost capacity; that imbalance shortens its life and the manufacturer may treat it as misuse. Always replace both at the same time.

When you get it and how to return it

Order before 6:00 pm with stock available and it leaves today: mainland Spain and Portugal receive it in 24-48 working hours, the islands and the rest of the EU in 3 to 5 days. You have 14 days to return it if it has not been installed, with free collection on the mainland, and shipment tracking by email.