Exide GEL12-14 · Motorcycle battery 12V 14Ah 150A GEL

Batería Exide GEL12-14 14Ah - 1
search
  • Batería Exide GEL12-14 14Ah - 1

Specifications

BrandEXIDE
Part numberGEL12-14
Voltage (V)12
Capacity (C20)14Ah (c20)
TechnologyGEL
Length150.00 cm
Width90.00 cm
Height145.00 cm
Weight5.10 Kgs
See the full specifications →
€89.60
VAT included
Quantity

  • 24-48h delivery
  • 14-day returns
  • Secure payment
  • +11,800 reviews

Brand EXIDE Reference GEL12-14

4,80· 35 reseñas
4,80/5★★★★★35 reviewsVerified purchases
  • ★★★★★Juan Jose Gallardo: Pedí la batería un jueves a las 4 y me llegó el viernes a las 7
  • ★★★★Andres Santiago: Me asesoraron en todo, excelente servicio
  • ★★★★Pedro IbaÑez: En general todo bien
See all 35 reviews

Exide GEL12-14 12V 14Ah 150A is a motorcycle starter battery with standard JIS code (the one on your bike's original label). Ready to use, sealed and vibration-resistant. Fits any model that takes the same JIS reference — the code your mechanic recognises at a glance.

Why this motorcycle battery?

  • Same JIS referenceas your bike's original — fits first time
  • Sealed and ready to useno acid handling, no refills
  • Survives winter storageholds charge through long off-season
JIS code
GEL12-14
Voltage
12 V
Capacity
14 Ah C20
Cold cranking
150 A EN-1
Dimensions
150×90×145 mm
Technology
GEL
Polarity
Positive on the left
Weight
5,1 kg
Model
EXIDE MOTO GEL 12V
Mfr. reference
GEL12-14
Logo Exide

Motorcycle battery Exide GEL12-14 Moto GEL 14Ah 150A 12V

12VVoltage
14AhCapacity
150ACold cranking
5.10kgWeight

With 14 Ah at 12 V and 150 A of cold cranking current (EN), the Exide GEL12-14 with GEL technology replaces the original battery of motorcycles, scooters, quads and personal watercraft. It measures 150 × 90 × 145 mm and the positive terminal on the left, the format sought by anyone replacing a 14 Ah battery in motorcycles.

  • Energetic cranking for high-compression engines.
  • Resistant to the vibration typical of two wheels.
  • Same JIS code as the original battery: fits first time.
  • GEL technology: gelled electrolyte, fully sealed and maintenance-free.

Size, terminals and hold-down of the Exide GEL12-14

In terms of format, the Exide GEL12-14 measures 150 × 90 × 145 mm (length × width × height) and weighs 5.10 kg. The positive terminal on the left decides which side the cables end up on: it is the detail that causes most buying mistakes, so check it before ordering. It uses a B0 hold-down and Female M6 terminals, the system that anchors and connects it in the vehicle. Before replacing it, measure your current battery tray: if all three dimensions and the terminal positions match, the swap is direct and needs no adapters.

What the Exide GEL12-14 is for

With 14 Ah, the Exide GEL12-14 covers the starting of motorcycles, scooters, quads and personal watercraft. The JIS code on your current battery label is the safest way to confirm equivalence. Check that it matches your current battery in dimensions, terminals and hold-down: this reference has a weight of 5.10 kg, Female M6 terminals and B0 hold-down.

The Exide GEL12-14: Moto GEL range and GEL technology

The Moto GEL is the Exide range the GEL12-14 belongs to: it shares the same construction and quality criteria with the rest of the series, and varies in capacity and format to suit each vehicle.

GEL technology fixes the acid in a solid gel. That removes maintenance and leaks and gives very long cycle life, in exchange for slightly slower recharging and lower peak current than an AGM.

What Exide does differently

Exide is one of the world's largest battery manufacturers and an original-equipment supplier to many car makers. Its European plants produce starter, industrial and leisure batteries under original-equipment quality controls. We guarantee that every Exide arrives new, charged and with the manufacturer's full warranty.

Manufacturer's warranty

The Exide GEL12-14 comes with the manufacturer's official warranty. The warranty does not cover discharge through prolonged inactivity: if the bike stands for months, use a trickle charger.

Usage and maintenance tips

GEL batteries need lower charging voltages: always use a charger with a GEL mode so as not to damage the electrolyte. Avoid repeated cranking attempts on a cold bike for long: if it does not start on the third try, let the battery rest for a minute.

When you get it and how to return it

Order before 6:00 pm with stock available and it leaves today: mainland Spain and Portugal receive it in 24-48 working hours, the islands and the rest of the EU in 3 to 5 days. You have 14 days to return it if it has not been installed, with free collection on the mainland, and shipment tracking by email.

BCOM-EXIDE-GEL12-14

Data sheet

Brand
EXIDE
Reference
GEL12-14
Model
EXIDE MOTO GEL 12V
Voltage (V)
12
Length
150.00 cm
Width
90.00 cm
Height
145.00 cm
Weight
5.10 Kgs
Technology
GEL
EAN
3661024035200
Terminal layout
Positive terminal on the left
Terminal type
Female M6
Hold-down
B0
Cold cranking amps (EN)
150A
Capacity (C20)
14Ah (c20)

Specific References

EAN13
3661024035200
MPN
GEL12-14
4,80/5
★★★★★35 reviews
Verified purchases
Latest verified reviews
★★★★★Juan Jose Gallardo
30/07/2026
Batería entregada al día siguiente

Pedí la batería un jueves a las 4 y me llegó el viernes a las 7

★★★★★Andres Santiago
07/02/2026
Gran servicio

Me asesoraron en todo, excelente servicio

★★★★★Pedro IbaÑez
04/02/2026
Lo mejor de lo mejor

En general todo bien

★★★★★Jose Maria Gil
26/01/2026
Te atienden super bien

Muy buena atención. Gracias

★★★★★Victor Manuel Alvarez
14/10/2025
La atención buena pero MRW regular

Pedí la bateria un jueves a las 4 y me llegó el viernes a las 2

Codes and references Exide GEL12-14

Brand Exide · see all batteries Exide
Manufacturer range EXIDE MOTO GEL 12V
Manufacturer reference (MPN) GEL12-14
EAN-13 barcode 3661024035200
Dimensions (length × width × height) 150 × 90 × 145 mm (150x90x145)

Recommended accessories — complement the Exide GEL12-14 with a charger or tester

How to change the battery

Guide to replace your motorcycle battery in 10-15 minutes. Motorcycle batteries are light (2-5 kg) and usually need an 8 mm wrench.

⏱ 10-15 min🛠 Tools: 8 mm wrench (some bikes use 10 mm) · Protective gloves
  1. Step 1. Prepare the vehicle

    Park on a flat surface, switch off the engine and remove the key. Make sure all lights and electrical accessories are off. Wait 1-2 minutes before starting.

  2. Step 2. Locate the battery compartment

    On motorcycles it is usually under the seat, in the rear cowl or behind a side panel. Check the manual — access varies a lot between models.

  3. Step 3. Disconnect the negative (−) terminal

    Use the 10 mm wrench to loosen the negative cable nut (black, marked −) and remove the cable from the post. Move it aside so it cannot touch any bodywork.

  4. Step 4. Disconnect the positive (+) terminal

    Repeat with the positive cable (red, marked +). Important: never let a terminal touch metal of the car while the other is still connected.

  5. Step 5. Remove the old battery

    Loosen the hold-down clamp or the straps that secure it. Lift the battery carefully — typical weight 2-5 kg. Check the terminals are not corroded before fitting the new one.

  6. Step 6. Install the new battery

    Place the battery in the same orientation as the old one (positive terminal on the same side). Tighten the hold-down clamp firmly.

  7. Step 7. Connect the cables

    Connect the positive (+) terminal first, then the negative (−). Tighten the nuts with the wrench until each terminal does not move. Apply anti-spark grease if you have any.

  8. Step 8. Verify the engine starts

    Close the bonnet. Start the engine to confirm everything works. On cars with Start-Stop or a BMS, you may need to register the battery via OBD so the alternator applies the correct charging profile.

Frequently asked questions

Is this battery GEL? What is the typical use?

Yes, this model is a GEL battery: sealed lead-acid where the electrolyte is in gel form. It tolerates deep discharges very well and is ideal for cyclic use (solar, motorhomes, electric wheelchairs, motorcycles). Requires a GEL-specific smart charger — max charge voltage ~14.1 V (vs 14.4-14.7 V for AGM). Lifespan 6-10 years.

How is the Exide GEL12-14 battery installed in the vehicle?

In most motorcycles it fits in 15-30 minutes with a 10 mm wrench; if the battery is under the seat or in the boot the time can double. See the step-by-step guide on this page. Quick summary: 1) switch off the engine and remove the key; 2) locate the original battery (engine bay, boot or under seat); 3) disconnect the negative (−) terminal first, then the positive (+); 4) loosen the hold-down clamp and remove the old battery; 5) fit the new one in the same orientation — match the polarity shown on the product sheet; 6) connect the positive (+) first, then the negative (−). On motorcycles with Start-Stop or BMS, register the battery via OBD so the alternator applies the correct charging profile.

How long does the Exide GEL12-14 battery last?

Expected lifespan of the Exide GEL12-14 is 6 to 10 years in cyclic use (marine, caravan, solar) with controlled discharges. In cold regions it drops slightly due to cold-start stress; in very hot regions it also drops because of electrolyte evaporation. To extend its life: avoid deep discharges (headlights on with engine off), have the alternator checked yearly, and keep the battery clean and properly secured.

What are the measurements of the GEL12-14 model?

Dimensions (length × width × height) are 150×90×145 mm — also written as 150x90x145 mm — following the European DIN standard. Always measure the space in your motorcycle before buying: even one extra millimetre can prevent the hold-down clamp from closing. The height shown includes the terminals.

Does this battery fit my motorcycle?

Three options to confirm: 1) enter your number plate in the finder (DGT/DVLA/KBA auto-detect your model and engine); 2) check the "Compatible vehicles" tab on this page, where we list every vehicle verified by our technical team; 3) if you cannot find your model, message us on WhatsApp with brand, model, engine and year — we reply during business hours (Mon–Fri 10:00–13:30 and 16:40–18:00 (Spanish time, CET)). The GEL12-14 typically fits a wide range of European vehicles thanks to its standard DIN case format.

Which batteries are equivalent to the Exide GEL12-14?

Directly interchangeable batteries (same dimensions, same polarity, same Ah and CCA) are the OEM equivalents from leading brands: Bosch, Tudor, Exide and, depending on the model, Banner or Yuasa. Exact equivalence depends on technology — an EFB cannot be replaced with a conventional battery in Start-Stop motorcycles. See the "Equivalents" section to view recommended options at the same performance level.


The top-rated online battery store in Spain

  • 4.5/5 · +11,800 reviews

    Audited by Trustpilot, no filters, no edits. The top-rated battery store in Spain.

    Trustpilot · verified, no filters

  • Official Varta distributor

    Official Varta wholesale distributor. 100% genuine batteries, recently manufactured, best price and no middlemen.

    World’s best-selling battery brand

  • +100,000 satisfied customers

    More than 100,000 customers already trust baterias.com — and recommend us to their friends and family.

    They trust us and recommend us

Choose trust, choose quality, choose baterias.com.