Exide TB758 · Start-Stop battery 12V 75Ah 770A
Start-Stop battery Exide TB758 12V 75Ah 770A images
Specifications
| Brand | EXIDE |
|---|---|
| Part number | TB758 |
| Voltage (V) | 12 |
| Capacity (C20) | 75Ah (c20) |
| Cold cranking amps (EN) | 770A |
| Technology | Lead-acid |
| Length | 260.00 cm |
| Width | 180.00 cm |
| Height | 186.00 cm |
Tudor TB758 12V 75Ah 770A is a dedicated Start-Stop battery with AGM/EFB technology. Withstands intensive cycling at traffic-light stops (hundreds of cranks per day), recharges quickly while driving and keeps comfort loads alive during long idle periods.
Why this Start-Stop battery?
- Designed for Start-Stopbuilt for the intensive cycling of modern cars
- 2 to 3 times longer lifevs fitting a cheap conventional battery
- Fast recoveryrecharges in minutes once the engine is running
Start-Stop battery Exide TB758 75Ah 770A 12V
The Exide TB758 delivers the 75 Ah at 12 V and 770 A of cold cranking current (EN) that cars with Start-Stop, regenerative braking and heavy electrical loads need. It replaces the original battery without adaptation in Start-Stop cars with a 260 × 180 × 186 mm format: same 75 Ah capacity and the positive terminal on the left.
In short: the Exide TB758 (75 Ah, 770 A, 260 × 180 × 186 mm, positive terminal on the left). It is a conventional battery for cars without Start-Stop: if yours has Start-Stop, it needs an EFB or AGM battery of the same size.
- Compatible with regenerative braking and energy management (BMS).
- Withstands hundreds of starts a day without degrading.
- Up to three times the cycles of a conventional battery.
- Direct replacement for the original Start-Stop battery.
What the Exide TB758 is for
The Exide TB758 is designed for cars with Start-Stop, regenerative braking and heavy electrical loads. If your car was fitted with an AGM or EFB battery, always replace it with the same technology: a conventional model would degrade within months. Check that it matches your current battery in dimensions, terminals and hold-down: this reference has a weight of 16.70 kg.
Technology inside the Exide TB758
Within the Exide catalogue, the TB758 is the 75 Ah model designed for this application.
Dimensions, polarity and mounting
In terms of format, the Exide TB758 measures 260 × 180 × 186 mm (length × width × height) and weighs 16.70 kg. The positive terminal on the left decides which side the cables end up on: it is the detail that causes most buying mistakes, so check it before ordering. Before replacing it, measure your current battery tray: if all three dimensions and the terminal positions match, the swap is direct and needs no adapters.
Why choose Exide batteries
With more than a century of history, Exide Technologies manufactures automotive, marine, motorcycle and industrial batteries in Europe. Its presence as original equipment on assembly lines vouches for the quality of every reference. We guarantee that every Exide arrives new, charged and with the manufacturer's full warranty.
Care and maintenance
If the vehicle only does very short trips, a periodic maintenance charge with an AGM/EFB-compatible charger greatly extends its life. Do not mix technologies: a conventional battery in a Start-Stop car degrades within months.
Manufacturer's warranty
The Exide TB758 comes with the manufacturer's official warranty. To keep it valid, always fit the same technology as the original battery (AGM or EFB) and register the replacement if your vehicle requires it.
When you get it and how to return it
Orders placed before 6:00 pm with the battery in stock ship the same day. Delivery in mainland Spain and Portugal takes 24-48 working hours; for the Balearic Islands and the rest of the European Union allow 3 to 5 working days. You have 14 days to return an unused battery; in mainland Spain and Portugal collection is free. We email you the tracking number as soon as the parcel ships.
-
-
ReferenceBCOM-EXIDE-TB758
Data sheet
-
BrandEXIDE
-
ReferenceTB758
-
ModelEXIDE EXIDE
-
Voltage (V)12
-
Length260.00 cm
-
Width180.00 cm
-
Height186.00 cm
-
Weight16.70 Kgs
-
TechnologyLead-acid
-
EAN3661024054706
-
Terminal layoutPositive terminal on the left
-
Cold cranking amps (EN)770A
-
Capacity (C20)75Ah (c20)
Specific References
-
EAN133661024054706
-
MPNTB758
Codes and references Exide TB758
| Brand | Exide · see all Exide batteries |
|---|---|
| Manufacturer range | EXIDE EXIDE |
| Manufacturer part number (MPN) | TB758 |
| EAN-13 barcode | 3661024054706 |
| Dimensions (length × width × height) | 260 × 180 × 186 mm (260x180x186) |
Recommended accessories
Fitting it yourself? Step-by-step guide to replacing the battery →
Frequently asked questions
How do I change this battery step by step?
In most cars it fits in 15-30 minutes with a 10 mm wrench; if the battery is under the seat or in the boot the time can double. See the step-by-step guide on our blog. Quick summary: 1) switch off the engine and remove the key; 2) locate the original battery (engine bay, boot or under seat); 3) disconnect the negative (−) terminal first, then the positive (+); 4) loosen the hold-down clamp and remove the old battery; 5) fit the new one in the same orientation — with positive on the left match the polarity shown on the product sheet; 6) connect the positive (+) first, then the negative (−). On cars with Start-Stop or BMS, register the battery via OBD so the alternator applies the correct charging profile.
How long does the Exide TB758 battery last?
Expected lifespan of the Exide TB758 is 4 to 6 years in regular car use without Start-Stop. In cold regions it drops slightly due to cold-start stress; in very hot regions it also drops because of electrolyte evaporation. To extend its life: avoid deep discharges (headlights on with engine off), have the alternator checked yearly, and keep the battery clean and properly secured.
What are the dimensions of the Exide TB758 battery?
Dimensions (length × width × height) are 260×180×186 mm — also written as 260x180x186 mm — following the European DIN standard. Always measure the space in your car before buying: even one extra millimetre can prevent the hold-down clamp from closing. The height shown includes the terminals.
On which side is the positive of the TB758 model?
Polarity: positive on the left. To identify it, place the battery in front of you with the terminals facing you and check which side the positive (+, marked with a red ring) is on. Before buying, verify the polarity matches your current battery: switching polarity forces longer cables or system reconfiguration, with short-circuit risk.
Is the TB758 valid for my vehicle?
Three options to confirm: 1) enter your number plate in the finder (DGT/DVLA/KBA auto-detect your model and engine); 2) check the "Compatible vehicles" tab on this page, where we list every vehicle verified by our technical team; 3) if you cannot find your model, message us on WhatsApp with brand, model, engine and year — we reply during business hours (Mon–Fri 10:00–13:30 and 16:40–18:00 (Spanish time, CET)). The TB758 typically fits a wide range of European vehicles thanks to its standard DIN case format.
Which batteries are equivalent to the Exide TB758?
Directly interchangeable batteries (same dimensions, same polarity, same Ah and CCA) are the OEM equivalents from leading brands: Bosch, Tudor, Exide and, depending on the model, Banner or Yuasa. Exact equivalence depends on technology — an EFB cannot be replaced with a conventional battery in Start-Stop cars. See the "Equivalents" section to view recommended options at the same performance level.
The top-rated online battery store in Spain
-
Audited by Trustpilot, no filters, no edits. The top-rated battery store in Spain.
Trustpilot · verified, no filters
-
Official Varta distributor
Official Varta wholesale distributor. 100% genuine batteries, recently manufactured, best price and no middlemen.
World’s best-selling battery brand
-
+100,000 satisfied customers
More than 100,000 customers already trust baterias.com — and recommend us to their friends and family.
They trust us and recommend us
Choose trust, choose quality, choose baterias.com.