Fulbat 6N6-3B · Motorcycle battery 6V 6.3Ah 50A

Motorcycle battery Fulbat 6N6-3B 6V 6.3Ah 50A | baterias.com
search
  • Motorcycle battery Fulbat 6N6-3B 6V 6.3Ah 50A | baterias.com

Specifications

BrandFULBAT
Part number6N6-3B
Voltage (V)6V
Capacity (C20)6.30Ah
Capacity (C10)6Ah (c10)
TechnologyLead-acid
Length99mm
Width57mm
Height111mm
See the full specifications →

This product is priced on demand to offer you the best available price at all times.

Please contact us to request a quote and we will inform you about availability and the best price on the entire website, as well as the delivery time.

Thank you

Fulbat 6N6-3B 6V 6,3Ah 50A is a motorcycle starter battery with standard JIS code (the one on your bike's original label). Ready to use, sealed and vibration-resistant. Fits any model that takes the same JIS reference — the code your mechanic recognises at a glance.

Why this motorcycle battery?

  • Same JIS referenceas your bike's original — fits first time
  • Sealed and ready to useno acid handling, no refills
  • Survives winter storageholds charge through long off-season
Voltage
6 V
Capacity
6,3 Ah C20
Cold cranking
50 A EN-1
Dimensions
99×57×111 mm
Technology
Lead-acid
Polarity
Positive on the right
Free quote, no obligation

Request a quote for your Motorcycle battery Fulbat 6N6-3B 6V 6.3Ah 50A

  • Reply in under 24 working hours
  • Best price guaranteed
Attach photo (optional)
Photo of the old battery or vehicle documentation · Max. 3 · 8 MB · images or PDF
Logo Fulbat

Motorcycle battery Fulbat 6N6-3B 6.3Ah 50A 6V

6VVoltage
6.3AhCapacity
50ACold cranking

The Fulbat 6N6-3B motorcycle battery is rated at 6 V, 6.3 Ah and 50 A of cold cranking current (EN), and is designed for motorcycles, scooters, quads and personal watercraft. It measures 99 × 57 × 111 mm and the positive terminal on the right, the format sought by anyone replacing a 6.3 Ah battery in motorcycles.

  • Same JIS code as the original battery: fits first time.
  • Conventional lead-acid: the most proven and economical technology.
  • Energetic cranking for high-compression engines.
  • Resistant to the vibration typical of two wheels.

What the Fulbat 6N6-3B is for

Designed for motorcycles, scooters, quads and personal watercraft, the Fulbat 6N6-3B replaces the original battery of bikes that use this code or format. Check the position of the positive terminal before ordering.

Technology inside the Fulbat 6N6-3B

The 6N6-3B is one of the Fulbat references for this type of use; it shares the same manufacturing and quality-control criteria as the rest of the brand's catalogue.

Conventional lead-acid is the benchmark against which other technologies are compared: good cranking current, great tolerance to alternator charging and the best price per amp-hour.

Size, terminals and hold-down of the Fulbat 6N6-3B

In terms of format, the Fulbat 6N6-3B measures 99 × 57 × 111 mm (length × width × height). The positive terminal on the right decides which side the cables end up on: it is the detail that causes most buying mistakes, so check it before ordering. For a direct replacement, the current battery tray must accept these dimensions and the same terminal layout; otherwise adapters will be needed or the hold-down will change.

What Fulbat does differently

Fulbat has manufactured in France since 1978 and specialises in motorcycles and light vehicles. Its catalogue is short and clear, covers almost the whole fleet and works only with sealed, leak-free batteries. At baterias.com we work directly with the manufacturer or its official distributor: real stock, brand-new product and official warranty.

Care and maintenance

Check the resting voltage before the season (above 12.6 V on a charged battery) and make sure the terminals are clean and tight. If the bike spends the winter standing, connect a trickle charger: deep discharge through inactivity is the first cause of premature failure.

Official warranty

The Fulbat 6N6-3B comes with the manufacturer's official warranty. The warranty does not cover discharge through prolonged inactivity: if the bike stands for months, use a trickle charger.

Shipping, delivery and returns

Order before 6:00 pm with stock available and it leaves today: mainland Spain and Portugal receive it in 24-48 working hours, the islands and the rest of the EU in 3 to 5 days. You have 14 days to return it if it has not been installed, with free collection on the mainland, and shipment tracking by email.

BCOM-FULBAT-6N6-3B

Data sheet

Brand
FULBAT
Model
FULBAT Motorcycle DRY
Voltage (V)
6V
Length
99mm
Width
57mm
Height
111mm
Technology
Lead-acid
Terminal layout
Positive right
Cold cranking amps (EN)
50A
Capacity (C20)
6.30Ah
Capacity (C10)
6Ah (c10)

Specific References

MPN
6N6-3B

Recommended accessories — complement the Fulbat 6N6-3B with a charger or tester

How to change the battery

Guide to replace your motorcycle battery in 10-15 minutes. Motorcycle batteries are light (2-5 kg) and usually need an 8 mm wrench.

⏱ 10-15 min🛠 Tools: 8 mm wrench (some bikes use 10 mm) · Protective gloves
  1. Step 1. Prepare the vehicle

    Park on a flat surface, switch off the engine and remove the key. Make sure all lights and electrical accessories are off. Wait 1-2 minutes before starting.

  2. Step 2. Locate the battery compartment

    On motorcycles it is usually under the seat, in the rear cowl or behind a side panel. Check the manual — access varies a lot between models.

  3. Step 3. Disconnect the negative (−) terminal

    Use the 10 mm wrench to loosen the negative cable nut (black, marked −) and remove the cable from the post. Move it aside so it cannot touch any bodywork.

  4. Step 4. Disconnect the positive (+) terminal

    Repeat with the positive cable (red, marked +). Important: never let a terminal touch metal of the car while the other is still connected.

  5. Step 5. Remove the old battery

    Loosen the hold-down clamp or the straps that secure it. Lift the battery carefully — typical weight 2-5 kg. Check the terminals are not corroded before fitting the new one.

  6. Step 6. Install the new battery

    Place the battery in the same orientation as the old one (positive terminal on the same side). Tighten the hold-down clamp firmly.

  7. Step 7. Connect the cables

    Connect the positive (+) terminal first, then the negative (−). Tighten the nuts with the wrench until each terminal does not move. Apply anti-spark grease if you have any.

  8. Step 8. Verify the engine starts

    Close the bonnet. Start the engine to confirm everything works. On cars with Start-Stop or a BMS, you may need to register the battery via OBD so the alternator applies the correct charging profile.

Frequently asked questions

How do I fit the 6N6-3B model in my motorcycle?

In most motorcycles it fits in 15-30 minutes with a 10 mm wrench; if the battery is under the seat or in the boot the time can double. See the step-by-step guide on this page. Quick summary: 1) switch off the engine and remove the key; 2) locate the original battery (engine bay, boot or under seat); 3) disconnect the negative (−) terminal first, then the positive (+); 4) loosen the hold-down clamp and remove the old battery; 5) fit the new one in the same orientation — match the polarity shown on the product sheet; 6) connect the positive (+) first, then the negative (−). On motorcycles with Start-Stop or BMS, register the battery via OBD so the alternator applies the correct charging profile.

How many years does this battery last?

Expected lifespan of the Fulbat 6N6-3B is 4 to 7 years in regular use (depends on technology and climate). In cold regions it drops slightly due to cold-start stress; in very hot regions it also drops because of electrolyte evaporation. To extend its life: avoid deep discharges (headlights on with engine off), have the alternator checked yearly, and keep the battery clean and properly secured.

What are the dimensions of the Fulbat 6N6-3B battery?

Dimensions (length × width × height) are 99×57×111 mm — also written as 99x57x111 mm — following the European DIN standard. Always measure the space in your motorcycle before buying: even one extra millimetre can prevent the hold-down clamp from closing. The height shown includes the terminals.

Does this battery fit my motorcycle?

Three options to confirm: 1) enter your number plate in the finder (DGT/DVLA/KBA auto-detect your model and engine); 2) check the "Compatible vehicles" tab on this page, where we list every vehicle verified by our technical team; 3) if you cannot find your model, message us on WhatsApp with brand, model, engine and year — we reply during business hours (Mon–Fri 10:00–13:30 and 16:40–18:00 (Spanish time, CET)). The 6N6-3B typically fits a wide range of European vehicles thanks to its standard DIN case format.

Which interchangeable batteries are there for this one?

Directly interchangeable batteries (same dimensions, same polarity, same Ah and CCA) are the OEM equivalents from leading brands: Bosch, Tudor, Exide and, depending on the model, Banner or Yuasa. Exact equivalence depends on technology — an EFB cannot be replaced with a conventional battery in Start-Stop motorcycles. See the "Equivalents" section to view recommended options at the same performance level.


The top-rated online battery store in Spain

  • 4.5/5 · +11,800 reviews

    Audited by Trustpilot, no filters, no edits. The top-rated battery store in Spain.

    Trustpilot · verified, no filters

  • Official Varta distributor

    Official Varta wholesale distributor. 100% genuine batteries, recently manufactured, best price and no middlemen.

    World’s best-selling battery brand

  • +100,000 satisfied customers

    More than 100,000 customers already trust baterias.com — and recommend us to their friends and family.

    They trust us and recommend us

Choose trust, choose quality, choose baterias.com.