Fulmen FG1102 · Truck battery 12V 110Ah 750A

Truck battery Fulmen FG1102 StartPRO 110Ah 750A 12V

With 110 Ah and 750 A of cold cranking current (EN), the Fulmen FG1102 from the StartPRO range is built for professional use in trucks, buses, tractors and heavy machinery. Its 349 × 175 × 235 mm and the positive terminal on the right make it the exact replacement for the 110 Ah battery fitted as standard to many trucks.

In short: the Fulmen FG1102 (110 Ah, 750 A, 349 × 175 × 235 mm, positive terminal on the right). Verified equivalent alternatives: Varta I18 and Exide EG1102.

• Resistant to constant chassis vibration.
• Good balance of capacity, cranking power and price.
• Better tolerance to deep discharge than a conventional starter battery.
• Powers tachograph, fridge and heater during rest stops.

What the Fulmen FG1102 is for

The Fulmen FG1102 is designed for trucks, buses, tractors and heavy machinery. In 24 V installations with two batteries in series, replace both at the same time to avoid imbalance. Check that it matches your current battery in dimensions, terminals and hold-down: this reference has a weight of 25.40 kg, 1 terminals and B01 hold-down.

Will it fit your current battery tray?

In terms of format, the Fulmen FG1102 measures 349 × 175 × 235 mm (length × width × height) and weighs 25.40 kg. The positive terminal on the right decides which side the cables end up on: it is the detail that causes most buying mistakes, so check it before ordering. It uses a B01 hold-down and 1 terminals, the system that anchors and connects it in the vehicle. Checking the three dimensions and the terminal position before buying avoids the most common mistake when replacing a battery.

What Fulmen does differently

Fulmen is the historic French brand of the Exide group: batteries made on the same lines and with the same technology as original equipment, widely used by workshops across Europe. We guarantee that every Fulmen arrives new, charged and with the manufacturer's full warranty.

The Fulmen FG1102: StartPRO range and conventional lead-acid technology

The FG1102 is part of the Fulmen StartPRO range. Choosing the right reference within the series comes down to capacity, dimensions and terminals: technology and quality are common to the whole family.

In a conventional battery the electrolyte is liquid and the lead plates are immersed in it. It is a mature, economical and easily recycled technology, ideal for starting vehicles in normal use.

Usage and maintenance tips

On batteries with filler caps, check the electrolyte level and top up only with distilled water. In 24 V installations, check periodically that both batteries show the same voltage; an imbalance means one is failing.

Warranty and coverage

The Fulmen FG1102 comes with the manufacturer's official warranty against manufacturing defects. An important note for commercial vehicles: most trucks use two batteries connected in series (24 V installation). If you replace only one, the new battery works alongside the old one, which has already lost capacity; that imbalance shortens its life and the manufacturer may treat it as misuse. Always replace both at the same time.

When you get it and how to return it

Order before 6:00 pm with stock available and it leaves today: mainland Spain and Portugal receive it in 24-48 working hours, the islands and the rest of the EU in 3 to 5 days. You have 14 days to return it if it has not been installed, with free collection on the mainland, and shipment tracking by email.