Deta DG1102 StartPRO · Truck battery 110Ah 750A
Specifications
| Brand | Deta |
|---|---|
| Part number | DG1102 |
| Voltage (V) | 12 |
| Capacity (C20) | 110Ah (c20) |
| Cold cranking amps (EN) | 750A |
| Technology | Lead-acid |
| Length | 349 mm |
| Width | 175 mm |
| Height | 235 mm |
This product is priced on demand to offer you the best available price at all times.
Please contact us to request a quote and we will inform you about availability and the best price on the entire website, as well as the delivery time.
Thank you
Deta DG1102 12V 110Ah 750A is a professional battery for heavy commercial vehicles. Withstands constant chassis vibration, supports long cold-engine cranks and keeps auxiliary services running (tachograph, heater, refrigeration, GPS) during driver's mandatory rest stops.
Why this truck battery?
- True Heavy Dutybuilt for intensive professional use
- Long cold-diesel cranksreliable even in extreme cold
- Powers services at idletachograph, heater and lights with engine off
Where it fits: the Deta DG1102 is one of our truck batteries, belongs to our Deta batteries and by capacity it sits among our 110Ah batteries.
I prefer to fill in the form
Request a quote for your Truck battery Deta DG1102 12V 110Ah 750A
- Reply in under 4 working hours
- Best price guaranteed

Truck battery Deta DG1102 StartPRO 110Ah 750A 12V
The Deta DG1102 truck battery is rated at 12 V, 110 Ah and 750 A of cold cranking current (EN) from the StartPRO range, and is prepared for trucks, buses, tractors and heavy machinery. Measuring 349 × 175 × 235 mm and the positive terminal on the right, it is the direct replacement for trucks fitted from the factory with a 110 Ah battery of this format.
In short: the Deta DG1102 (110 Ah, 750 A, 349 × 175 × 235 mm, positive terminal on the right). Verified equivalent alternatives: Varta I18 and Tudor TF1202.
- Powers tachograph, fridge and heater during rest stops.
- Better tolerance to deep discharge than a conventional starter battery.
- Good balance of capacity, cranking power and price.
- Resistant to constant chassis vibration.
Size, terminals and hold-down of the Deta DG1102
In terms of format, the Deta DG1102 measures 349 × 175 × 235 mm (length × width × height) and weighs 25.40 kg. The positive terminal on the right decides which side the cables end up on: it is the detail that causes most buying mistakes, so check it before ordering. It uses a B01 hold-down, the system that anchors and connects it in the vehicle. For a direct replacement, the current battery tray must accept these dimensions and the same terminal layout; otherwise adapters will be needed or the hold-down will change.
What the Deta DG1102 is for
The Deta DG1102 is designed for trucks, buses, tractors and heavy machinery. In 24 V installations with two batteries in series, replace both at the same time to avoid imbalance. Check that it matches your current battery in dimensions, terminals and hold-down: this reference has a weight of 25.40 kg and B01 hold-down.
The Deta DG1102: StartPRO range and conventional lead-acid technology
Within the Deta catalogue, the StartPRO series groups the references designed for this use. The DG1102 is the 110 Ah model of that family, with the same performance as its siblings in other sizes.
The conventional lead-acid battery remains the most widespread technology thanks to its balance of capacity, cranking current and price. Well maintained and kept charged, it offers years of reliable service in vehicles without Start-Stop.
Why choose Deta batteries
Deta is the German brand of the Exide group: batteries built with original-equipment technology and a very complete range for cars, Start-Stop, trucks, motorcycles and leisure. All the Deta batteries in our catalogue are genuine product, recently manufactured and covered by the manufacturer's warranty.
Official warranty
The Deta DG1102 comes with the manufacturer's official warranty against manufacturing defects. An important note for commercial vehicles: most trucks use two batteries connected in series (24 V installation). If you replace only one, the new battery works alongside the old one, which has already lost capacity; that imbalance shortens its life and the manufacturer may treat it as misuse. Always replace both at the same time.
Care and maintenance
On batteries with filler caps, check the electrolyte level and top up only with distilled water. During rest stops with active loads, avoid repeated deep discharges: they shorten the life of any starter battery.
When you get it and how to return it
Orders placed before 6:00 pm with the battery in stock ship the same day. Delivery in mainland Spain and Portugal takes 1 to 2 working days; for the Balearic Islands and the rest of the European Union allow 1 to 5 working days. You have 14 days to return an unused battery; in mainland Spain and Portugal collection is free. We email you the tracking number as soon as the parcel ships.
Data sheet
-
BrandDETA
-
ReferenceDG1102
-
ModelDETA StartPRO
-
Voltage (V)12
-
Length349 mm
-
Width175 mm
-
Height235 mm
-
Weight25.40 Kgs
-
TechnologyLead-acid
-
EAN3661024025393
-
Terminal layoutPositive terminal on the right
-
Hold-downB01
-
Cold cranking amps (EN)750A
-
Capacity (C20)110Ah (c20)
-
Case typeD02
Specific References
-
EAN133661024025393
-
MPNDG1102
Codes and references Deta DG1102
| Brand | Deta |
|---|---|
| Manufacturer range | DETA StartPRO |
| Manufacturer part number (MPN) | DG1102 |
| EAN-13 barcode | 3661024025393 |
| Dimensions (length × width × height) | 349 × 175 × 235 mm (349x175x235) |
Deta DG1102: best-selling equivalent or higher-spec batteries
The Deta DG1102 is interchangeable with these equivalent references: I18 (Varta), TF1202 (Tudor), EF1202 (Exide), EG1102 (Exide), TG1102 (Tudor).
| Product | Specifications | Technology | Price | |||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Deta
DG1102
This battery
|
12V 110Ah 750A | Lead-acid | ||||||||||||||||||||||
Tudor
TF1202
Tudor equivalent
|
12V 120Ah 870A | Lead-acid | €109.40 +€109.40 | |||||||||||||||||||||
| ||||||||||||||||||||||||
| DG1102 | TF1202 | |
|---|---|---|
| Capacity | 110 Ah | 120 Ah |
| Cold cranking (EN) | 750 A | 870 A |
| Technology | Lead-acid | Lead-acid |
| Dimensions (mm) | 349 × 175 × 235 | 349 × 175 × 235 |
| Positive terminal | Positive terminal on the right | Positive terminal on the right |
| Price | €109.40 |
Varta
I18
Varta equivalent
Deta DG1102 vs Varta I18
Varta equivalent · +€109.60
Same case and same fitting as the DG1102, from Varta. Compared with the DG1102 it has 70 A of cold cranking less. It costs €109.60 more. If you want to save or the DG1102 is out of stock, it is the safe alternative: same dimensions, same polarity and official warranty.
| DG1102 | I18 | |
|---|---|---|
| Capacity | 110 Ah | 110 Ah |
| Cold cranking (EN) | 750 A | 680 A |
| Technology | Lead-acid | Lead-acid |
| Dimensions (mm) | 349 × 175 × 235 | 349 × 175 × 236 |
| Positive terminal | Positive terminal on the right | Positive terminal on the right |
| Price | €109.60 |
Exide
EF1202
Exide equivalent
Deta DG1102 vs Exide EF1202
Exide equivalent · +€113.90
The Exide alternative that fits where the DG1102 goes, with the same polarity. Compared with the DG1102 it has 10 Ah more and 120 A of cold cranking more. It costs €113.90 more. A straight swap with nothing to adapt; the difference is the price and the brand you prefer.
| DG1102 | EF1202 | |
|---|---|---|
| Capacity | 110 Ah | 120 Ah |
| Cold cranking (EN) | 750 A | 870 A |
| Technology | Lead-acid | Lead-acid |
| Dimensions (mm) | 349 × 175 × 235 | 349 × 175 × 235 |
| Positive terminal | Positive terminal on the right | Positive terminal on the right |
| Price | €113.90 |
Exide
EG1102
Exide equivalent
Deta DG1102 vs Exide EG1102
Exide equivalent · +€104.70
The Exide alternative that fits where the DG1102 goes, with the same polarity. Compared with the DG1102 it has the same Ah and cranking power. It costs €104.70 more. A straight swap with nothing to adapt; the difference is the price and the brand you prefer.
| DG1102 | EG1102 | |
|---|---|---|
| Capacity | 110 Ah | 110 Ah |
| Cold cranking (EN) | 750 A | 750 A |
| Technology | Lead-acid | Lead-acid |
| Dimensions (mm) | 349 × 175 × 235 | 349 × 175 × 235 |
| Positive terminal | Positive terminal on the right | Positive terminal on the right |
| Price | €104.70 |
Tudor
TG1102
Tudor equivalent Deta DG1102 vs Tudor TG1102
Tudor equivalent · +€104.70
Same case and same fitting as the DG1102, from Tudor. Compared with the DG1102 it has the same Ah and cranking power. It costs €104.70 more. If you want to save or the DG1102 is out of stock, it is the safe alternative: same dimensions, same polarity and official warranty.
| DG1102 | TG1102 | |
|---|---|---|
| Capacity | 110 Ah | 110 Ah |
| Cold cranking (EN) | 750 A | 750 A |
| Technology | Lead-acid | Lead-acid |
| Dimensions (mm) | 349 × 175 × 235 | 349 × 175 × 235 |
| Positive terminal | Positive terminal on the right | Positive terminal on the right |
| Price | €104.70 |
Equivalences verified by our technical team: same dimensions, polarity, capacity and CCA. Official manufacturer warranty on every option.
Other 110Ah batteries: We stock 28 models of 110 Ah to compare by price, technology and cold cranking: see all 110Ah batteries. Same size (349 × 175 × 235 mm): batteries of 349 × 175 × 235 mm.
Recommended accessories
Frequently asked questions
Why does my lorry have two batteries?
Most lorries, buses and tractors run on 24 V with two 12 V batteries connected in series. Always replace both at the same time and with the same model: if one is new and the other old, they become unbalanced and both last less.
How long does the Deta DG1102 battery last?
As a rough estimate, the Deta DG1102 typically lasts 4 to 6 years in normal lorry use; it is a guide figure, not a guaranteed period. Actual lifespan varies with climate (cold starts, heat evaporating the electrolyte), with usage and short journeys, with the condition of the alternator and charging system, with power draw while parked and with maintenance; the type of truck and Start-Stop also count.
What are the dimensions of the Deta DG1102 battery?
The Deta DG1102 takes up 349×175×235 mm (length, width and height, terminals included), with a B01 hold-down. Before buying, measure the space in your truck: one extra millimetre can stop the hold-down clamp from closing.
What polarity does the Deta DG1102 battery have?
Polarity of the Deta DG1102: positive on the right. Seen from the front, terminals towards you, the positive (+) is the post with the red ring. Compare it with the battery you are replacing: if it does not match, cables must be lengthened or the system reconfigured, with a risk of short circuit.
Will the Deta DG1102 battery fit my truck?
The quickest way is to enter your number plate in the finder: DGT/DVLA/KBA detect model and engine. You can also look at the "Compatible vehicles" tab, verified by our technical team, or send us make, model, engine and year on WhatsApp; we answer during business hours (Mon–Fri 10:00–13:30 and 16:30–18:00 (Spanish time, CET)). The truck manufacturer's specifications always take priority over our tables.
What are the equivalents of the DG1102 model?
See the "Equivalents" section of this page for the recommended options at the same performance level. Mind the technology: in Start-Stop trucks an EFB is not swapped for a conventional battery. Interchangeable means the same dimensions, same polarity, same Ah and same CCA; for the DG1102, 110 Ah (750 A cranking).
The top-rated online battery store in Spain
-
Audited by Trustpilot, no filters, no edits. The top-rated battery store in Spain.
Trustpilot · verified, no filters
-
Official Varta distributor
Official Varta wholesale distributor. 100% genuine batteries, recently manufactured, best price and no middlemen.
World’s best-selling battery brand
-
+100,000 satisfied customers
More than 100,000 customers already trust baterias.com — and recommend us to their friends and family.
They trust us and recommend us
Choose trust, choose quality, choose baterias.com.