Deta DJ1100 · Truck battery 12V 110Ah 900A

Truck battery Deta DJ1100 PowerPRO y Construction 110Ah 900A 12V

The Deta DJ1100 truck battery is rated at 12 V, 110 Ah and 900 A of cold cranking current (EN) from the PowerPRO y Construction range, and is prepared for trucks, buses, tractors and heavy machinery. Measuring 349 × 175 × 235 mm and the positive terminal on the right, it is the direct replacement for trucks fitted from the factory with a 110 Ah battery of this format.

In short: the Deta DJ1100 (110 Ah, 900 A, 349 × 175 × 235 mm, positive terminal on the right). Verified equivalent alternatives: Tudor TG1100 and Exide EG1100.

• Powers tachograph, fridge and heater during rest stops.
• Better tolerance to deep discharge than a conventional starter battery.
• Good balance of capacity, cranking power and price.
• Resistant to constant chassis vibration.

Size, terminals and hold-down of the Deta DJ1100

It has external dimensions of 349 × 175 × 235 mm and weighs 28.30 kg. The positive terminal on the right decides which side the cables end up on: it is the detail that causes most buying mistakes, so check it before ordering. It uses a B00 hold-down and 1 terminals, the system that anchors and connects it in the vehicle. For a direct replacement, the current battery tray must accept these dimensions and the same terminal layout; otherwise adapters will be needed or the hold-down will change.

What the Deta DJ1100 is for

Designed for trucks, buses, tractors and heavy machinery, the Deta DJ1100 withstands constant chassis vibration and discharges during stops with active loads. Check that it matches your current battery in dimensions, terminals and hold-down: this reference has a weight of 28.30 kg, 1 terminals and B00 hold-down.

The Deta DJ1100: PowerPRO y Construction range and conventional lead-acid technology

Within the Deta catalogue, the PowerPRO y Construction series groups the references designed for this use. The DJ1100 is the 110 Ah model of that family, with the same performance as its siblings in other sizes.

In a conventional battery the electrolyte is liquid and the lead plates are immersed in it. It is a mature, economical and easily recycled technology, ideal for starting vehicles in normal use.

What Deta does differently

Deta combines German engineering with Exide's industrial capacity. Its Power, Senator and PowerPRO series cover everything from urban cars to construction machinery. All the Deta batteries in our catalogue are genuine product, recently manufactured and covered by the manufacturer's warranty.

Official warranty

The Deta DJ1100 comes with the manufacturer's official warranty against manufacturing defects. An important note for commercial vehicles: most trucks use two batteries connected in series (24 V installation). If you replace only one, the new battery works alongside the old one, which has already lost capacity; that imbalance shortens its life and the manufacturer may treat it as misuse. Always replace both at the same time.

Care and maintenance

Keep the terminals clean and tight and the battery firmly secured against chassis vibration. During rest stops with active loads, avoid repeated deep discharges: they shorten the life of any starter battery.

When you get it and how to return it

Same-day dispatch from our warehouse for in-stock orders placed before 6:00 pm: 24-48 working hours in mainland Spain and Portugal, 3 to 5 days in the islands and the rest of Europe. Returns are accepted for 14 days if the battery has not been used (free collection on the Iberian mainland). You will receive tracking by email.