Fulmen FC605 · Car battery 12V 60Ah 440A

Car battery Fulmen FC605 Standard 60Ah 440A 12V

The Fulmen FC605 car battery is rated at 12 V, 60 Ah and 440 A of cold cranking current (EN) from the Standard range, and is designed for passenger cars with conventional starting, without a Start-Stop system. Its 270 × 173 × 222 mm and the positive terminal on the left make it the exact replacement for the 60 Ah battery fitted as standard to many cars.

In short: the Fulmen FC605 (60 Ah, 440 A, 270 × 173 × 222 mm, positive terminal on the left). It is a conventional battery for cars without Start-Stop: if yours has Start-Stop, it needs an EFB or AGM battery of the same size. Verified equivalent alternatives: Exide EC605 and Tudor TC605.

• Stable voltage for the vehicle electronics (ECU, sensors, climate control).
• Good balance of capacity, cranking power and price.
• Designed to last several years under normal daily use.
• Low self-discharge: copes with long stops without losing charge.

What the Fulmen FC605 is for

With 60 Ah, the Fulmen FC605 is sized for passenger cars with conventional starting, without a Start-Stop system. It is a direct replacement for the original battery as long as dimensions and terminals match. Check that it matches your current battery in dimensions, terminals and hold-down: this reference has a weight of 15.50 kg, 1 terminals and Korean B1+B6 hold-down.

The Fulmen FC605: Standard range and conventional lead-acid technology

The Standard is the Fulmen range the FC605 belongs to: it shares the same construction and quality criteria with the rest of the series, and varies in capacity and format to suit each vehicle.

In a conventional battery the electrolyte is liquid and the lead plates are immersed in it. It is a mature, economical and easily recycled technology, ideal for starting vehicles in normal use.

Will it fit your current battery tray?

The Fulmen FC605 is made in the 270 × 173 × 222 mm format and weighs 15.50 kg. The positive terminal on the left decides which side the cables end up on: it is the detail that causes most buying mistakes, so check it before ordering. It uses a Korean B1+B6 hold-down and 1 terminals, the system that anchors and connects it in the vehicle. For a direct replacement, the current battery tray must accept these dimensions and the same terminal layout; otherwise adapters will be needed or the hold-down will change.

Fulmen: the maker behind the FC605

Fulmen is the historic French brand of the Exide group: batteries made on the same lines and with the same technology as original equipment, widely used by workshops across Europe. All the Fulmen batteries in our catalogue are genuine product, recently manufactured and covered by the manufacturer's warranty.

Care and maintenance

Keep the terminals clean and tight, and check that the resting voltage does not drop below 12.4 V: below that it is time to recharge. On batteries with filler caps, check the electrolyte level and top up only with distilled water.

Official warranty

The Fulmen FC605 comes with the manufacturer's official warranty against manufacturing defects; the exact period is stated in the brand's conditions. If it fails through a defect within the period, we replace it free of charge.

Delivery times and returns

Order before 6:00 pm with stock available and it leaves today: mainland Spain and Portugal receive it in 24-48 working hours, the islands and the rest of the EU in 3 to 5 days. You have 14 days to return it if it has not been installed, with free collection on the mainland, and shipment tracking by email.